Y17 缝纫机 标准查询与下载

QB/T 2254-2010 缝纫机专用螺纹

本标准规定了缝纫机专用螺纹的基本牙型、尺寸计算、螺纹的基本尺寸、公差带、螺纹标记及螺纹尺寸偏差和公差、螺纹牙侧角的定义和极限偏差等。 本标准适用于缝纫机专用螺纹。

Special-purpose thread of sewing machine

QB/T 2255.1-2010 工业用缝纫机 机针 第1部分:GC型和GN型

本部分规定了工业用缝纫机GC型和GN型机针的术语和定义、产品分类、要求、试验方法、检验规则和标志包装、运输、贮存。 本部分适用于平缝缝纫机用GC3×1型，刺绣机、双针平缝机用GC3×5型，包缝机用GN×1型机针。

Industrial sewing machine.Sewing needle.Part 1:The type of GC and GN

QB/T 2034.2-2010 缝纫机术语 第2部分:刺绣机术语

本部分规定了刺绣机的产品名称术语、基础术语、机构装置术语、控制系统术语、操作术语、花样制作术语。 本部分适用于刺绣机专业领域设计、生产、维修及贸易。

Sewing machine terminology.Part 2:embroidery machine terminology

QB/T 2626.3-2010 工业用缝纫机 针板的通用技术条件 第3部分:绷缝缝纫机针板

本部分规定了工业用缝纫机绷缝缝纫机针板的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本部分适用于工业用绷缝缝纫机针板。

Industrial sewing machine.Technical conditions of needle plate.Part 3:Needle-plate for coverstitch sewing machine

QB/T 4007-2010 工业用缝纫机 高速平缝机伺服系统技术条件

本标准规定了工业用缝纫机高速平缝机伺服系统的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于工业用高速平缝机伺服系统，类似工业用缝纫机伺服系统可参照采用。

Industrial sewing machine.General specification of high speed servo control system of industrial lockstitch sewing machine

QB/T 2529-2010 工业用缝纫机 GK型筒式绷缝缝纫机机头

本标准规定了GK型筒式绷缝缝纫机机头的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于缝制中厚料、厚料织物并形成400或600线迹的GK型筒式绷缝缝纫机机头。

Industrial sewing machine.GK type cylinder bed type covering stitch sewing machine head

DIN EN ISO 10821:2009 工业缝制机.缝纫机装置和系统的安全要求(ISO 10821:2005+修改件1:2009),德文版本EN ISO 10821:2005+A1:2009

This International Standard applies to industrial sewing machines, which are intended for the professional (industrial, commercial, in lab) use in the garment industry and shoe industry, leather goods industry, shirts and blouses industry, hosiery industry, knitwear industry, ladies' underwear industry, glove industry, upholsteries industry, packaging industry and shoe repair.

Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005 + Amd 1:2009); German version EN ISO 10821:2005 + A1:2009

SANS 60335-2-28:2009 家用及类似用途电器.安全.第2-28部分:对缝纫机的特殊要求

Deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Overlock machines and electrical sets are within the scope of the s

Household and similar electrical appliances - Safety Part 2-28: Particular requirements for sewing machines

DIN EN 60335-2-28:2009 家用和类似用途电器.安全性.第2-28部分:缝纫机的特殊要求(修改的IEC 60335-2-28-2002+A1-2008)

Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines (IEC 60335-2-28:2002, modified + A1:2008); German version EN 60335-2-28:2003 + A1:2008

SANS 10101:2008 针缝、接缝及缝纫的标准名称

Covers various kinds of stitches, seams, and stitchings used in the fabrication of articles by sewing. It also prescribes the standard symbols for their designation.

Standard nomenclature for stitches, seams, and stitchings

IEC 60335-2-28:2008 家用和类似用途电器.安全性.第2-28部分:缝纫机的特殊要求

This clause of Part 1 is replaced by: This International Standard deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Overlock machines and electrical sets are within the scope of the standard. Appliances not intended for normal household use, but that nevertheless may be a source of danger to the public, such as sewing machines intended to be used by laymen in shops and in light industry, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account - persons (including children) whose ~ physical, sensory or mental capabilities; or ~ lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; - children playing with the appliance. NOTE 101 Attention is drawn to the fact that - for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; - in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 102 This standard does not apply to - appliances intended exclusively for industrial purposes; - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).

Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines

UL 1594-2008 缝纫和裁剪机械

The document cover both household and industrial sewing and cutting machines to be employed in accordance with the National Electrical Code. These requirements also cover small utilization products, such as vibrator-powered scissors where motion of an operating part is produced by electrical means. These requirements do not cover equipment rated more than 600 V; nor do they cover products involving universal motors rated more than 250 V. These requirements also cover textile equipment for use in ordinary locations but do not cover equipment intended for use in hazardous locations such as certain textile processing equipment, and yarn handling equipment.

Sewing and cutting machines

DIN 24900-12:2007 工程和相关领域用图形符号.第12部分:缝纫机

Graphical symbols for use in the engineering and related fields - Part 12: Sewing machines

QB/T 2044-2007 工业用缝纫机.平台式绷缝缝纫机机头

本标准规定了平台式绷缝缝纫机机头的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于缝制薄料、中厚料织物，形成400类或600类线迹的平台式绷缝缝纫机机头（以下简称“机头”）。

Industrial sewing machine.Raised bed type covering stituh sewing machine head

QB/T 2875-2007 工业用缝纫机.加固缝缝纫机机头

本标准规定了工业用加固缝缝纫机机头的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于工业用加固缝缝纫机机头（以下简称“机头”）。

Industrial sewing machine.Strong stitch sewing machine head

QB/T 2876-2007 工业用缝纫机.链式线迹钉钮扣缝纫机机头

本标准规定了链式线迹钉钮扣缝纫机机头的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于链式线迹钉钮扣缝纫机机头（以下简称“机头”）。

Industrial sewing machine.Button attaching sewing machine head

QB/T 2626.2-2007 工业用缝纫机.针板的通用技术条件.第2部分:高速包缝缝纫机针板

本部分规定了工业用缝纫机调整包缝缝纫机针板的要求、试验方法、检验规则和标志、包装、运输、贮存。 本部分适用于以定位槽定位（系列）和沉头孔定位（系列）的工业用调整包缝缝纫机针板，其他形式的调整包缝缝纫机针板（以下简称“针板”）应参照执行。

Industrial sewing machine.Techincal conditions of needle plate.Part2: Needle-plate for high speed overlock sewing machine

QB/T 2380-2007 工业用缝纫机.电脑控制高速平缝缝纫机

本标准规定了电脑控制高速平缝缝纫机的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于缝纫中厚料、薄料、厚料等织物的电脑控制高速平缝缝纫机（以下简称“平缝机”），直接驱动型电脑控制平缝缝纫机可参照使用。

Industrial sewing machine .Computer control High speed lockstitch machine

QB/T 2877-2007 工业用缝纫机.缝厚能力的试验方法

本标准规定了工业用缝纫机缝厚能力的试验装备、试验方法、试验要求和试验报告格式。 本标准适用于工业用缝纫机缝厚能力的试验。

Industrial sewing machine.Determination of sewing capacity

SN/T 1589.6-2006 进出口家用和类似用途电器检验规程 第6部分：缝纫机

Import and Export Inspection Regulations for Household and Similar Electrical Appliances Part 6: Sewing Machines