Y43 牙膏、肥皂、洗涤剂 标准查询与下载

JIS K 3304:2006 肥皂的测试方法

この規格は，石けん(ただし，成分として界面活性剤及び合成洗剤を合まないもの)の試験方法について規定する。

Test methods for soaps

QB/T 2116-2006 洗衣膏

本标准规定了洗衣膏的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于由表面活性剂及洗涤助剂配方生产的弱碱性洗衣膏产品，适宜洗涤棉、麻和化纤织物，不适宜洗涤丝、毛类织物。

Laundry paste

SANS 5224:2006 肥皂产品中氯化物的含量（电势测定法）

Specifies the potentiometric method for the determination of the chloride content of soap products.

Chloride content of soap products (potentiometric method)

SANS 5186:2006 清洗复合物中的碱性盐含量

Specifies a method for the determination of the alkaline salt content (as anhydrous sodium carbonate) of scouring compounds.

Alkaline salt content of scouring compounds

SANS 5185:2006 肥皂粉或肥皂片的总碱含量

Specifies a method for the determination of the total alkali content of soap powders or chips.

Total alkali content of soap powders or chips

SANS 5188:2006 肥皂产品中非皂化物和不皂化物的含量

Specifies a method for the determination of the unsaponified plus unsaponifiable matter content of soap products.

Unsaponified plus unsaponifiable matter content of soap products

SANS 5226:2006 清洗复合物中挥发物的含量

Specifies a method for the determination of the volatile matter content of scouring compounds

Volatile matter content of scouring compounds

SANS 169:2006 浅色肥皂产品的游离碱和游离酸含量

Specifies a method for the determination of the free alkali content and free acid content of light coloured soap products.

Free alkali content and free acid content of light coloured soap products

SANS 5187:2006 肥皂产品中的脂肪性物质含量

Specifies a method for the determination of the fatty matter content of soap products.

Fatty matter content of soap products

SANS 5225:2006 石碳酸皂中的石碳酸含量

Specifies a method for the determination of the carbolic acid content of carbolic soap.

Carbolic acid content of carbolic soap

SANS 5228:2006 肥皂中脂肪物质的凝固点

Specifies a method for the determination of the titre of fatty matter.

Titre of fatty matter in soaps

SANS 5223:2006 肥皂中脂肪物质的树脂含量

Specifies a method for the determination of the rosin content of fatty matter in soaps.

Rosin content of fatty matter in soaps

SANS 5806:2006 洗涤清洁剂的泡沫高度

Specifies a method for the determination of the foam height of laundry detergents.

Foam height of laundry detergents

SANS 5230:2006 清洗复合物中不溶于水的物质的细度

Specifies a method for the determination of the fineness of the water-insoluble matter of scouring compounds.

Fineness of water-insoluble matter of scouring compounds

SANS 5781:2006 洗涤清洁剂的不溶水物质含量

Specifies a method for the determination of the water-insoluble matter content of laundry detergents.

Water-insoluble matter content of laundry detergents

SANS 5232:2006 清洗复合物的研磨系数

Specifies a method for the evaluation of the abrasive number of scouring compounds.

Abrasive number of scouring compounds

ASTM E2082-06 洗发剂特性的描述性分析标准导则

The methods outlined in this guide can be used to qualitatively and quantitatively describe the performance and sensory characteristics of shampoos. The methods described in this guide may be used for product formulation and research guidance as well as for quality control. These methods may be used by individuals who familiarize themselves with these procedures and who have previous experience with sensory evaluation. Variables that may affect results include, but are not limited to, water conditions (for example, hardness), hair type, and hair condition. These variables should be controlled or accounted for in the experimental design. These are suggested procedures and are not intended to exclude alternate methods, which may effectively provide the same or similar results.1.1 The objective of this guide is to provide procedures which may be used in the design, execution, and analysis of studies to quantitatively assess the objective sensory attributes of shampoos. This is one of many appropriate techniques used in the hair-care industry. These attributes can then be used to define performance of shampoos and to provide direction in product formulation, research guidance testing, and claim substantiation. This guide includes the sensory properties involved in dispensing a product, as well as the attributes pertinent to shampooing tresses, half and whole heads. Although this guide is specific to shampoos, the procedures should be applicable to most hair-care products.1.2 Guidelines are provided for the definition of terminology, procedures for manipulation of products, identification/selection of hair type, and assessor training. References for rating scales are not provided in this guide. The user should be aware that some sensory practices may require the use of attribute references (anchors) when training the assessors.

Standard Guide for Descriptive Analysis of Shampoo Performance

ASTM D5343-06(2012)e1 陶磁面砖清洁器的清洗性能评估的标准指南

This guide suggests methodology for cleaning tests. This methodology can only be applied to assess product performance on typical bathroom soils and is not inclusive of all potential soils present on ceramic tiles or other bathroom surfaces. An assessment of cleaning performance on surfaces other than ceramic tile cannot be presumed since there is no confirmed basis for correlation for this soil on other surface or substrate types. The results of tests based on this guide are regarded as diagnostic screening values useful in formulation studies, quality control, and ingredient raw material qualification. The results of this guide should be compared to control treatments, which are incorporated into each performance evaluation. These results should be considered to be relative to all other treatments in the study and are not absolute values. For interlaboratory comparisons, exact treatment conditions must be established and then results should be compared as relative ranking to the control treatments rather than as absolute values. This guide is applicable to testing all types of multi-purpose household and bathroom cleaners, whether the detergent is prepared by dissolving a soluble powder, a dilutable liquid, or is a non-dilutable product. It may also be useful for evaluation of products or conditions normally associated with industrial or institutional cleaners.1.1 This guide covers the evaluation of the cleaning performance of products intended for use on ceramic tiles. This guide provides techniques for soiling, cleaning, and evaluating performance of detergent systems under controlled, but practical, hard-surface cleaning conditions. Note 18212;The soils described in this guide are known in the industry as “soap scum.” 1.2 Such systems include any detergent, cleaner, or abrasive cleanser intended for cleaning hard surfaces composed of ceramic tile. This guide is not appropriate for evaluating performance on grout. This guide also excludes other surfaces such as glass, resilient flooring, synthetic countertop surfaces or washable wall surfaces. The products for which this guide is intended include solutions of soluble powdered detergent, dilutions of concentrated liquid detergent, or products intended to be used full strength, for example, foams, sprays, liquid, wipes, powders, or paste. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Material Safety Data Sheets are available for reagents. Review them for hazards prior to usage.

Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners

ASTM E2049-06 合格审核员对洗发剂和护发素香味/气味的定量属性评估用标准指南

This guide can be used to quantitatively assess the intensity of specific attributes of hair fragrance. This guide may be utilized for product development, research guidance, and quality control. These are suggested procedures and are not meant to exclude alternate procedures that may effectively provide the same or similar results.1.1 This guide covers standardized procedures for the quantitative sensory assessment of fragrance/odor intensity or attribute intensity of fragrances in shampoo or hair conditioner base through all stages of use (point of purchase, lather, in use, wet hair after rinse, and dry hair) under laboratory conditions with trained assessors.This standard addresses the use of hair products and the equipment needed to use these products. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Quantitative Attribute Evaluation of Fragrance/Odors for Shampoos and Hair Conditioners by Trained Assessors

ASTM D5343-06(2012) 陶磁面砖清洁器的清洗性能评估标准指南

This guide suggests methodology for cleaning tests. This methodology can only be applied to assess product performance on typical bathroom soils and is not inclusive of all potential soils present on ceramic tiles or other bathroom surfaces. An assessment of cleaning performance on surfaces other than ceramic tile cannot be presumed since there is no confirmed basis for correlation for this soil on other surface or substrate types. The results of tests based on this guide are regarded as diagnostic screening values useful in formulation studies, quality control, and ingredient raw material qualification. The results of this guide should be compared to control treatments, which are incorporated into each performance evaluation. These results should be considered to be relative to all other treatments in the study and are not absolute values. For interlaboratory comparisons, exact treatment conditions must be established and then results should be compared as relative ranking to the control treatments rather than as absolute values. This guide is applicable to testing all types of multi-purpose household and bathroom cleaners, whether the detergent is prepared by dissolving a soluble powder, a dilutable liquid, or is a non-dilutable product. It may also be useful for evaluation of products or conditions normally associated with industrial or institutional cleaners.1.1 This guide covers the evaluation of the cleaning performance of products intended for use on ceramic tiles. This guide provides techniques for soiling, cleaning, and evaluating performance of detergent systems under controlled, but practical, hard-surface cleaning conditions. Note 18212;The soils described in this guide are known in the industry as “soap scum.” 1.2 Such systems include any detergent, cleaner, or abrasive cleanser intended for cleaning hard surfaces composed of ceramic tile. This guide is not appropriate for evaluating performance on grout. This guide also excludes other surfaces such as glass, resilient flooring, synthetic countertop surfaces or washable wall surfaces. The products for which this guide is intended include solutions of soluble powdered detergent, dilutions of concentrated liquid detergent, or products intended to be used full strength, for example, foams, sprays, liquid, powders, or paste. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Material Safety Data Sheets are available for reagents. Review them for hazards prior to usage.

Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners