Y88 工艺美术品 标准查询与下载

DB65/T 2131-2004 和田玉器工艺质量

Hotan Jadeware Technological Quality

QB/T 2631.2-2004 金饰工艺画.金层含金量与厚度测定.ICP光谱法.第2部分:金箔画

本部分规定了金箔画金层含金量与厚度的测定方法。 本部分适用于QB/T2630.2《金饰工艺画第2部分:金箔画金层》标准规定的金层含金量与厚度。其它贴金胶片工艺品测定可参照执行。

Gold craft picture - Fineness and thickness of gold coating - ICP solution spectrometric method - Part 2:Picture on gold foil

QB/T 2631.1-2004 金饰工艺画.金层含金量与厚度测定.ICP光谱法.第1部分:金膜画

本部分规定了金膜画金层含金量与厚度的测定方法。 本部分适用于QB/T 2623.1《金饰工艺画 第l部分:金膜画金层》标准规定的金层含金量与厚度的测定，也适用于在金膜上印刷各种文字、图案等制品金层的测试。

Gold craft picture - Fineness and thickness of gold coating - ICP solution spectrometric method - Part 1:Print on gold film

QB/T 2630.2-2004 金饰工艺画.第2部分:金箔画金层

本部分规定了金箔画金层的技术要求和检验方法。 本部分适用于金箔画的生产和检验。其它贴金胶片工艺品可参照执行。

Gold craft picture-Part 2:Gold foil on gold craft pictures

QB/T 2630.1-2004 金饰工艺画.第1部分:金膜画金层

本部分规定了金膜画金层的技术要求和检验方法。 本部分适用于在金膜上印刷各种文字、图案、书画、照片等金膜画的金层。

Gold craft picture-Part 1:Gold film on gold craft pictures

QB/T 1690-2004 贵金属饰品质量测量允差的规定

本标准规定了金、银、铂、钯饰品及材料质量测量允差的技术要求、试验方法和标志。 本标准适用于以质量结算的金、银、铂、钯饰品及材料的贸易。

Provision of permissible errors for measurement of precious metals adornment mass

KS D ISO 8653:2003 珠宝.戒指尺寸.定义、测量和名称与符号

이 규격은 귀금속으로 사용되는 반지의 크기를 표시하기 위한 반지 크기의 측정 방법에 대

Jewellery－Ring-sizes－Definition, measurement and designation

KS D ISO 13756:2003 珠宝合金用银的测定.容量法(电位滴定法)用氯化钠或氯化钾

이 규격은 귀금속용 은 합금 중의 은의 함유량을 측정하기 위한 전위차 적정법에 대하여

Determination of silver in silver jewellery alloys－Volumetric(potentiometric) method using sodium chloride or potassium chloride

ASTM D6957-03 测量漆刷子填充材料卷曲度的标准实施规程

It is important for the manufacturing and performance of a brush to have filaments with minimal curl.1.1 This practice describes the procedure for measuring curl in synthetic filament.1.2 This practice is applicable to filament 2 to 5 in. (50.8 to 127 mm) in length.1.3 This practice is applicable to tapered filament or level filament.1.4 The values given in-pound units are to be regarded as the standard as this is the dominant measurement system used in the paint brush industry. The values given in parentheses are for information only.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Measuring Curl in Paint Brush Filling Material

BS PD CR 12471:2002 直接或延期接触人体皮肤的合金消费品或覆层释放的镍的影象测试

This document presents a screening procedure, based primarily on the use of dimethylglyoxime, for the detection of nickel release from items that come into direct and prolonged contact with the skin. The tests provide qualitative, not quantitative, results. NOTE - EN 1811 specifies a quantitative reference test for the release of nickel.

Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin

DB65/ 046-2002 珠宝玉石饰品的标识

The marking of jewelry and jade

NF A70-021:2001 贵金属.与贵金属珠宝合金一起使用的钎料的精细度

Precious metals - The finenesses of solders used with precious metal jewellery alloys.

GOST R 51715-2001 类似冷加工或喷射或发射武器外部结构的装饰品和纪念品.一般技术要求

Настоящий стандарт устанавливает требования к конструкции а также технические требования к декоративным и сувенирным, сходным по внешне

Decorative and souvenir products similar in external structure to cold or throw or missile weapon. General technical requirements

DB35/ 419-2000 寿山石

本标准规定了寿山石的定义、特征和鉴定方法。本标准适用于寿山石实验室出据证书或报告，也适用于寿山石的生产和贸易活动。

Shoushan Stone

DB37/ 287-2000 贵金属饰品标识

本标准规定了贵金属饰品的标识内容、和方法

Precious Metal Jewelry Identification

DB37/ 286-2000 珠宝、玉石饰品标识

本标准规定了珠宝玉石饰品标识的内容、要求和方法

Jewelry, jade jewelry logo

JIS H 6309:1999 珠宝.贵金属合金的纯度

この規格は，ジュエリー用貴金属合金の純度(品位)(ろうを除く。)の範囲について規定する。

Jewellery -- Fineness of precious metal alloys

BS EN 1811:1998+A1:2008 镍由产品上释放试图直接和长时间与皮肤接触的参考试验方法

Method for simulating release of nickel from articles intended to come into direct and prolonged contact with the skin.

Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin

BS EN 1810:1998 体穿孔后组件.火焰原子吸收分光光度法测定镍含量的基准试验方法

Method for determination of nickel in aluminium, titanium, copper, silver, gold and their alloys and in steels by flame atomic absorption spectrophotometry.

Body-piercing post assemblies - Reference test method for determination of nickel content by flame atomic absorption spectrometry

SANS 11490:1995 钯合金首饰中含钯量的测定．丁二酮肟重量法

Specifies a gravimetric method for the determination of palladium in palladium jewellery alloys, preferably within the range of fineness stated in ISO 9202. These alloys may contain silver, indium, gallium, copper, cobalt, nickel, tin and ruthenium. Copr

Determination of palladium in palladium jewellery alloys - Gravimetric determination with dimethylglyoxime