Y94 皮革加工机械 标准查询与下载

BS EN 12653:2000 鞋靴,皮革和仿皮革生产机床.钉接机.安全要求

This standard is applicable to nailing machines used in the footwear manufacturing industry, namely: - heel attaching machines (see figure 1) - heel nailing machines (see figure 2) - gang nailing machines (see figure 3) This standard does not apply to gang nailing machines which comply in all respects with the requirements for seat lasting machines: see EN 931. This standard specifies safety requirements for the design and construction of nailing machines. No specific requirements are included for transport, commissioning and decommissioning. It takes account of intended use, foreseeable misuse, component and system failure. This standard covers all hazards relevant to the footwear manufacturing industry. Use of the machines within the scope of this standard in different industries may give rise to hazards which were not taken into account at the time of its preparation. This standard applies to machines manufactured after its date of issue.

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements

DIN EN 1035:1999 制革机.移动熨平机械.安全性要求

The document defines safety requirements for construction, transport, installation, adjustment, setting, teaching or process change over, operation, cleaning, maintenance etc. for moving plate machines.

Tannery machines - Moving plate machinery - Safety requirements; German version EN 1035:1998

BS EN 1035:1999 鞣皮机.移动台板机.安全性要求

This European Standard specifies safety requirements for all the phases of the life of a machine listed in 3.11.a of EN 292-1:1991. Moving platen machines are machines used for the processing of animal hides and skins. They are table type processing machines which are equipped with: —vertical opening and closing movement; —alternative horizontal feed-in and feed-out movement. This European Standard covers the following machines (see Figures 1 to 5 for typical configurations and normative annex C for descriptions): a) vacuum dryers with vertical movement (see Figure 1); b) vacuum dryers with horizontal and vertical movement (see Figure 2); c) vacuum stretching-machines (see Figure 3); d) platen ironing and embossing machines with vertical movement (see Figure 4); e) platen ironing and embossing machines with horizontal and vertical movement (see Figure 5). It takes account of intended use, foreseeable misuse, component and systems failure. This European Standard applies to the machines manufactured after its date of issue. All the significant hazards listed in clause 4 are covered by the requirements included in clause 5 except: —dust, fume, vapour and liquid emissions, for which general guidelines are proposed in the informative annex B. Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.

Tannery machines. Moving platen machinery. Safety requirements

NF G54-101:1998 制革机械.往复式滚压成形机.安全要求

Tannery machines. Reciprocating roller machines. Safety requirements.

BS EN 972:1998+A1:2010 制革机械.往复滚压机.安全性要求

This European Standard specifies safety requirements for all the phases of the life of a machine listed in !5.3 a) of EN ISO 12100-1:2003". Reciprocating roller machines are machines used for the processing of animal hides and skins. They have a reciprocating opening and closing motion of the feed rollers or conveyors which, if required, may also reverse their direction. This standard covers the following reciprocating roller machines (see figures 1 to 13 for typical configurations and annex D for descriptions): a) Buffing machines (see figures 1a and 1b) b) Polishing machines (see figures 1a and 1b) c) Ironing machines (woolskins and fur) (see figures 2a and 2b) d) Carding machines (see figures 3a and 3b) e) Shearing machines (woolskins and fur) (see figures 4a and 4b) f) Cylinder universal staking machines (see figures 5a and 5b) g) Setting-out machines (see figures 6a and 6b) h) Dewooling machines (see figures 6a and 6b) i) Scudding machines (see figures 6a and 6b) j) Unhairing (dehairing) machines (see figures 6a and 6b) k) Sammying machines (see figures 6a and 6b) l) Cylinder ironing machines (see figures 7a and 7b) m) Cylinder staking machines (see figures 8a and 8b) n) Fleshing machines (see figures 9a and 9b) o) Demanuring machines (see figures 10a and 10b) p) Wet wheeling machines (see figures 11a and 11b) q) Shaving machines (feed-out) (see figures 12a and 12b) r) Shaving machines (feed-in) (see figures 13a and 13b) It takes account of intended use, foreseeable misuse, component and systems failure. !This European Standard is not applicable to reciprocating roller machines which are manufactured before the date of its publication as EN." !This European Standard provides provisions for the reduction of noise emission at the design stage (see 5.2.4 and Annex A). However, it does not provide a noise test code for the determination by measurement of noise emission values for the machines it covers. Without such a code the manufacturer cannot fulfil his obligation to provide the noise emission values of the machines put on the market." !All the significant hazards (see Clause 4) are dealt with in this European Standard except the following:" ? Dust, smoke and vapour emissions (see Annex B); ? Fire (see Annex C). For these hazards general guidelines are proposed in !normative annexes". Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.

Tannery machines. Reciprocating roller machines. Safety requirements

BS EN 972:1998 制革机械.往复滚压机的安全性要求

This European Standard specifies safety requirements for all the phases of the life of a machine listed in 3.11a) of EN 292-1:1991. Reciprocating roller machines are machines used for the processing of animal hides and skins. They have a reciprocating opening and closing motion of the feed rollers or conveyors which, if required, may also reverse their direction. This standard covers the following reciprocating roller machines (see Figures 1 to 13 for typical configurations and annex D for descriptions): a) buffing machines [see Figures la) and lb)]; b) polishing machines [see Figures la) and lb)]; c) ironing machines (woolskins and fur) [see Figures 2a) and 2b)]; d) carding machines [see Figures 3a) and 3b)]; e) shearing machines (woolskins and fur) [see Figures 4a) and 4b)]; f) cylinder universal staking machines [see Figures 5a) and 5b)]; g) setting-out machines [see Figures 6a) and 6b)]; h) dewooling machines [see Figures 6a) and 6b)]; i) scudding machines [see Figures 6a) and 6b)]; j) unhairing (dehairing) machines [see Figures 6a) and 6b)]; k) sammying machines [see Figures 6a) and 6b)]; 1) cylinder ironing machines [see Figures 7a) and 7b)]; m) cylinder staking machines [see Figures 8a) and 8b)]; n) fleshing machines [see Figures 9a) and 9b)]; o) demanuring machines [see Figures 10a) and 10b); p) wet wheeling machines [see Figures lla) and l1b)]; q) shaving machines (feed-out) [see Figures 12a) and 12b)]; r) shaving machines (feed-in) [see Figures 13a) and 13b). It takes account of intended use, foreseeable misuse, component and systems failure. This European Standard applies to machines manufactured after its date of issue. All the significant hazards listed in clause 4 are safeguarded by the requirements included in clause 5 except the following: —dust, smoke and vapour emissions (see annex B); —fire (see annex C). For these hazards general guidelines are proposed in informative annexes. Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.

Tannery machines - Reciprocating roller machines - Safety requirements

QB/T 2366-1998 皮革机械噪声声功率极限值

本标准规定了皮革机械噪声声功率级的限值。 本标准适用于制革机械设备、制鞋机械设备、毛皮加工机械设备的77种产品的噪声声功率级限值。 本标准不适用于线性尺寸超过15m的机器设备。

Limit value of sound power of leather machinery noise

QB/T 2368-1998 框架绷平干燥机

本标准规定了框架绷平干燥机的技术要求、试验方法、检验规则和标志、包装、运输、贮存等。 本标准适用于皮革加工设备框架绷平干燥机。

Frame flattening dryer

QB/T 2367-1998 滚印涂饰机

本标准规定了滚印涂饰机的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于皮革加工设备滚印涂饰机。

Roll printing finishing machine

BS EN 931:1997+A2:2009 靴袜制造机械.拉伸耐久试验机.安全性要求

1.1 This standard is applicable to lasting machines used in the footwear manufacturing industry, namely: - Adhesive fore part lasting machines (see figure 1), - Hand operated adhesive side lasting machines (see figure 3 A), - Adhesive seat lasting machines (see figure 2), - Adhesive seat and side lasting machines (see figure 2), - Hand operated tack/staple side lasting machines (see figure 3B), - Tack seat lasting machines (see figure 2), - Tack seat and side thermocement lasting machines (see figure 2), - Tack heel seat and thermocent side lasting machines (see figure 2), - Tack heel seat and thermocent + tack side lasting machines (see figure 2). 1.2 This standard does not apply to lasting machines which process granular thermocement. 1.3 This standard specifies requirements for safe design, construction and use of the machines. No specific requirements are included for transport, commissioning and decommissioning. It takes account of intended use, foreseeable misuse, component and system failure. 1.4 This standard covers all hazards relevant to the footwear manufacturing industry. The use of machines within the scope of this standard in different industries may give rise to hazards which were not taken into account at the time of its preparation. 1.5 This document is not applicable to lasting machines which are manufactured before the date of its publication as EN.

Footwear manufacturing machines - Lasting machines - Safety requirements

BS EN 930:1997+A2:2009 鞋类、皮革和仿皮革产品生产机械.粗加工、刷洗、上光和整理机械.安全要求

1.1 This standard applies to the following machines which are intended to work material for the manufacture of footwear: -Automatic and manual roughing, scouring and polishing machines; - Automatic and manual edge contour trimming machines. 1.2 This standard does not apply to modular shoe repair machines. 1.3 This standard specifies safety requirements for design, construction and operation. It takes account of intended use, foreseeable misuse, component and system failure. 1.4 This standard covers all hazards relevant to the footwear, leather and imitation leather goods manufacturing industries. The use of machines within the scope of this standard in different industries may give rise to hazards which were not taken into account at the time of its preparation. 1.5 This document is not applicable to roughing, scouring, polishing and trimming machines which are manufactured before the date of its publication as EN.

Footware, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

QB/T 2123-1995 制革机械尺寸规格系列

本标准规定了制革机械产品的尺寸规格系列。 本标准适用于制革机械产品。

Tannery Machinery Dimensions Series

QB/T 2012-1994 通过式磨革机

本标准规定了通过式磨革机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于制革中修饰革面、革里的通过式磨革机。

Through type leather grinding machine

QB/T 1833-1993 轻革平展挤水机

本标准规定了轻革平展挤水机的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于工作宽度为1 200~3000mm的干燥前用的轻革平展挤水机。

Light Leather Flat Squeeze Machine

QB/T 1832-1993 往复式磨革机

本标准规定了往复式磨革机的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于工作宽度为210-600mm制革生产中修饰革面、革里的往复式磨革机。

Reciprocating leather grinding machine

QB/T 1760-1993 羽绒预分机

本标准规定了羽绒预分机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于羽绒预分机。

Down pre-extension machine

QB/T 1761-1993 通过式挤水机

本标准规定了通过式挤水机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工作宽度为1200~3200mm的通过式挤水机(以下简称“挤水机”)。

Pass-through water squeezer

QB/T 1762-1993 胶粘压合机

本标准规定了胶粘压合机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于胶粘压合工序所用胶粘压合机的制造和检验。

Adhesive press machine

prEN 972-1992 制革机械.往复式滚轧机.安全要求

Tannery machines; reciprocating roller machines; safety requirements

QB/T 1523-1992 毛皮机械设备及仪器术语

本标准规定了毛皮机械设备、辅助机械设备及毛皮检测仪器术语。 本标准适用于毛皮行业和毛皮机械制造行业，其他行业可参照执行。

Technical terms for machineries and testing apparatus used in fur industry