V51 客运 标准查询与下载

GB/T 16177-1996 公共航空运输服务质量标准

本标准规定了公共航空运输企业、机场、代理人及相关部门的旅客、货物运输服务质量要求。 本标准适用于在中国获得经营许可的公共航空运输企业、机场及代理人。

Quality standards of public air transport service

MH/T 1037-2017 不正常航班旅客服务规范

本标准规定了在国内航空运输过程中发生航班不正常时对旅客提供服务的要求。 本标准适用于公共航空运输企业(以下称承运人)及其代理人、机场管理机构等相关单位在航班不正常时的服务和管理。

Passenger service requirements for irregular flight

BS EN 4727:2017 航空航天系列 标准化乘客座椅重量信息

Aerospace series. Standardized passenger seat weight information

BS EN 4726:2015 航空航天系列. 飞机座舱部件表面外观变化的验收

Aerospace series. Acceptance of the cosmetic variations in appearance of aircraft cabin parts

BS EN 4723:2015 航空航天系列. 飞机乘客座椅舒适性和居住空间面积标准的标准化测量方法

Aerospace series. Standardized measurement methods for comfort and living space criteria for aircraft passenger seat

EN 4723:2015 航空航天系列.标准化的测量方法舒适度和生活空间标准的飞机乘客座位

This European Standard specifies requirements and measurement methods for the assessment of passenger living space and comfort. Its aim is to improve the passenger comfort quality of aircraft cabins and provide measurement methods to compare cabin seat layouts and seats.

Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats

BS EN 4727:2015 航空航天系列. 乘客座椅重量标准化信息

Aerospace series. Standardized passenger seat weight information

EN 4727:2015 航空航天系列.标准化乘客座椅重量信息

The weight for cabin equipment is an important topic in the aviation business. The cabin equipment weight has a direct impact on the payload of the aircraft, operation cost and revenue of the airlines. Due to the number of aircraft seats, seats are one of the major weight drivers in the cabin. At this time a lot of seat weights are used without any clear definition, e. g. allowable max. weight, certified weight, defined weight. For the definition of each customer specific cabin definition it is important to get comparable seat weights. Aircraft seats are very different with regard to seat envelope dimensions and integrated features and options. For a weight calculation and product comparison it is very helpful to get comparable weight information based on a standard weight. The aim of this European Standard is to define a clear definition for the different weight information and a baseline for a seat weight calculation to get comparable seat weights for set brochures and marketing reasons.

Aerospace series - Standardized passenger seat weight information

SAE ARP5526D-2015 飞机座椅设计指南和澄清

Aircraft Seat Design Guidance and Clarifications

MH/T 1061-2014 民用运输机场贵宾服务规范

本标准规定了民用运输机场提供贵宾服务的服务区域、服务功能及服务人员的服务质量要求。本标准适用于民用运输机场(含军民合用机场的民用部分)贵宾服务质量的管理。

Civil transport airport VIP service specification

MH/T 1060-2014 公共航空运输航班超售处置规范

本标准规定了国内公共航空运输企业航班超售处置的基本要求、预计超售航班处置和航班超售处置的要求。本标准适用于国内公共航空运输企业(以下简称承运人)航班超售处置。

Disposing specifications for oversales of public air transportation

CFR 14-145.213-2014 航空和航天. 第145部分:修理站. 第145.213节:检查维护预防性维护或改变.

(a) A certificated repair station must inspect each article upon which it has performed maintenance, preventive maintenance, or alterations as described in paragraphs (b) and (c) of this section before approving that article for return to service.

Aeronautics and Space. Part145:Repair stations. Section145.213:Inspection of maintenance, preventive maintenance, or alterations.

DIN EN 16495:2014 空中交通管理. 支持民航运营的机构的信息安全; 德文和英文版本EN 16495-2014

Air Traffic Management - Information security for organisations supporting civil aviation operations; German and English version EN 16495:2014

HB 8407-2013 民用直升机座椅通用要求

General requirements for civil helicopter seats

SAE AIR4496A-2013 个人轮椅的舱装载

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Aerospace Information Report (AIR) provides guidance criteria for the storage of personal wheelchairs in the passenger compartment of transport category aircraft, which have not been provided by the air carrier and are designated for the sole use of the passenger requiring such assistance.

Cabin Stowage of Personal Wheelchairs

SAE ARP4769B-2013 主甲板或下甲板用船员休息舱

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of January 2007. It is recommended, therefore, that this specification not be specified for new designs.

Crew Rest Container for Main Deck or Lower Deck

MH/T 1048-2012 航空旅客乘机安全信息告知

Safety Information Notification for Air Passengers

DIN EN 4697:2012 航空航天系列.乘客座椅配件通用和安装要求.德文和英文版本EN 4697-2012

Aerospace series - General and installation requirements for passenger seat fittings; German and English version EN 4697:2012

SAE ARP6448-2012 与第AC21-49节第7.b条款一致的带集成电子座椅的单向开槽批准

This document provides an industry-recommended framework for establishing agreements to ensure that seats with integrated electronic components (e.g., actuation system, reading light, inflatable restraint, IFE, etc.) meet the seat TSO Minimum Performance Standard. These agreements will allow Seat Suppliers to build and ship completed, integrated and approved seat assemblies under TSOA with electronics included. The document presents the roles, responsibilities and accontibilities of the Electronics Manufacturer, the Seat Supplier, and the Seat Installer/Electronics Activator in the context of AC 21-49 Section 7.b ' Type Certification using TSO-approved seat with electronic components defined in TSO design'. This document applies to all FAA seat TSOs (C39(), C127()...etc). Only the TSO attributes of integrated electronic components that affect the seat TSO compliance (e.g., component strength and attachment under static and dynamic loading conditions, delethalization, flammability, HIC, and lumbar loads) are addressed. The approval for the integration of the electronics will fall, in part or in full, under the type design authority of the Seat Installer rather than the Seat Supplier shipping the integrated seat. The defined responsibilities, areas of authority and accountability of each party, as well as necessary communication protocols, must ensure configuration management, design control and quality control. These definitions, controls and protocols are agreed (thru normal commercial agreements and binding contracts) and adhered to by all parties ensuring all parts in the supply chain remain approved (e.g. certified and conformed). This document primarily focuses on the relationship between the Seat Supplier and the Electronics Manufacturer. Table A1 of Appendix A of this document contains information which details the key characteristics of electronic components derived from the Change Impact Analysis characteristics identified in AS9016 (see Reference), tailored to the specific needs of AC 21-49, that require review to ensure proper compliance with the TSO requirements per Table 1 of AC21-49. Additionally, Appendix B has been included to outline a typical data approval and change management process tailored specifically for ensuring proper communication links are established between all parties. There are many different ways to ensure design and quality control procedures are in place to meet AC21-49 Section 7.b requirements through the established process identified in this document. While the responsibility rests solely with the Seat Supplier to ensure all TSO attributes identified in Table 1 of AC21-49 are acceptable, Appendix C has been included to outline the process for authorization of Electronics Manufacturers to assess the impact of changes in their equipment on the TSO attributes. This authorization will allow the classification of the change and the appropriate handling of the implementation of the change.

Gaining Approval for Seats with Integrated Electronics in Accordance with AC21-49 Section 7.b

SAE ARP6199-2012 14CFR 第25部分附录F, 第IV & V部分的飞机乘客座椅的评价方法用试验方法

This SAE Aerospace Recommended Practice (ARP) provides an approach for determining which parts on aircraft seats are non-traditional, large, non-metallic panels that need to meet the test requirements of 14CFR Part 25 Appendix F, Parts IV & V. Independent furniture related to seat installations is outside the scope of this document.

Method to Evaluate Aircraft Passenger Seats for the Test Requirements of 14CFR Part 25 Appendix F, Parts IV & V