11.180.15 标准查询与下载
共找到 156 条与 相关的标准，共 11 页
ISO 19029:2016 specifies the sound characteristics of auditory guiding signals for persons with seeing impairment and blindness to provide the location and direction information of particular public facilities. The public facilities include facilities such as railway stations, airports, ports, bus terminals, government offices, libraries, community centres, parks, schools, hospitals, theatres, large supermarkets, and its toilets, stairs, etc. EXAMPLE As an auditory guiding signal, a chime sound is emitted from the ticket gate of a railway station. Pedestrians, including persons with seeing impairment and blindness, are able to know the location of the ticket gate by detecting the location of the chime sound. NOTE 1 The auditory guiding signals are also helpful for sighted persons. ISO 19029:2016 also specifies the design or usage of the equipment that provides auditory guiding signals. ISO 19029:2016 does not specify the characteristics of the alerts, such as alarm sounds or emergency signals. NOTE 2 The auditory danger signals are covered by ISO 7731. ISO 19029:2016 does not specify the characteristics of auditory guiding signals coming from the personal mobile equipment that is worn by persons with seeing impairment and blindness.
Accessible design — Auditory guiding signals in public facilities
- ICS
- 11.180.15
- CCS
- 发布
- 2021-07-01
- 实施
1.1 This practice defines means for describing system performance (ex vivo) and, in particular, system output of an implantable middle ear hearing device (IMEHD) by measuring a physical quantity that is relevant to the insertion gain and output level of the IMEHD when implanted in the patient. 1.2 This practice is similar to headphone calibration on an artificial ear in which the sound pressure level (in decibel sound pressure level (SPL)) measured in the artificial ear can be converted to patient hearing level (in decibel hearing level (HL)) using a known transfer function, as defined by ANSI 3.7. These measurements can then be used to predict system parameters relevant for patient benefit such as functional gain, maximum output, and variability. Measurements defined in this practice should be useful for patients, clinicians, manufacturers, investigators, and regulatory agencies in making comparative evaluations of IMEHDs. 1.3 The values given in SI units are to be considered the standard.
Standard Practice for Describing System Output of Implantable Middle Ear Hearing Device
- ICS
- 11.180.15
- CCS
- 发布
- 2021-07-01
- 实施
IEC 60601-2-66:2019 is available as IEC 60601-2-66:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60601-2-66:2019 applies to the BASIC SAFETY of HEARING AIDS and HEARING AID SYSTEMS, hereafter also referred to as ME EQUIPMENT or ME SYSTEM. IEC 60601-2-66:2019 cancels and replaces the second edition published in 2015. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision of the definition about ESSENTIAL PERFORMANCE; b) revision of the application of IEC 60601-1-2:2014 for electromagnetic disturbances; c) correction of the used voltage for HEARING AIDS from 1,6 V to 4,5 V; d) correction of the drop test level from 1,5 m to 1,0 m; e) correction of the wording of IEC 60601-2-66:2015.
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
- ICS
- 11.180.15
- CCS
- 发布
- 2020-04-03
- 实施
- 2020-05-19 (7)
This document specifies ergonomic requirements and recommendations for consumer product spoken instructions that are provided to guide users in the operation of a product and/or as a means of providing feedback to users about the status/state of a product. Such instructions can be used by persons with or without visual impairments, and are useful for users who have difficulty reading and/or cognitive impairments. The applicability of the requirements and recommendations described in this document does not depend on the language of the instructions or whether the instructions are provided via recorded human speech or synthesized speech from text. The requirements and recommendations in this document are applicable to conventional, stand-alone consumer products in general, whose function is limited by characteristics that prevent a user from attaching, installing or using assistive technology in order to use the product. They are not applicable to machines and equipment used for professional work. This document does not apply to products for which the instructional content and/or the means of presentation are specified in other standards (e.g. medical devices, fire alarms). It also does not provide recommendations or requirements for spoken instructions of Interactive Voice Response (IVR) systems or digital assistants on personal computers or similar devices. NOTE ISO 9241‑154 provides recommendations or requirements for IVR systems. This document does not specify voice sounds of text-to-speech systems or narrative speech used in place of printed instruction manuals and independently from the product.
Ergonomics - Accessible design - Spoken instructions of consumer products (ISO 24551:2019)
- ICS
- 11.180.15
- CCS
- 发布
- 2019-11-20
- 实施
- 2020-02-29
This document specifies design requirements and recommendations for indicator lights, mainly LED sourced, on consumer products for use by older people and people with visual disabilities. It does not consider the needs of persons who are blind. Indicator lights include those that inform users visually about the conditions, changes in functional status and settings, and malfunction of products. They convey information by light on/off, time-modulated intensity, blinking, colour, luminance level, and layout. This document addresses household and home appliances. It excludes electronic displays presenting characters and graphics, machinery, and appliances in special use for professional, technical, and industrial applications.
Ergonomics - Accessible design - Indicator lights on consumer products (ISO 24550:2019)
- ICS
- 11.180.15
- CCS
- 发布
- 2019-11-20
- 实施
- 2020-02-29
This standard gives recommendations for the measurement and estimation of the real ear acoustical performance characteristics of air-conduction hearing aids and for the measurement of certain acoustic properties of the ear related to the application of hearing aids. Measurements of real-ear acoustical characteristics of hearing aids which apply non-linear or analytical processing techniques are valid only for the test signals used and conditions employed.
Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids (IEC 61669:2015); German version EN 61669:2016
- ICS
- 11.180.15
- CCS
- L31
- 发布
- 2018-06-01
- 实施
- 2018-06-01
Replacement: This International Standard applies to the BASIC SAFETY of HEARING INSTRUMENTS and HEARING INSTRUMENT SYSTEMS, hereafter also referred to as ME EQUIPMENT or ME SYSTEM. If a clause or subclause is specifically intended to be applicable to HEARING INSTRUMENTS only, or to HEARING INSTRUMENT SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to HEARING INSTRUMENTS and to HEARING INSTRUMENT SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of HEARING INSTRUMENTS or HEARING INSTRUMENT SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 201.7.9.2 and 201.9.6. NOTE See also 201.4.2. (RISK MANAGEMENT). ACCESSORIES to HEARING INSTRUMENTS in the HOME HEALTHCARE ENVIRONMENT (e.g. remote control units, audio streamers, battery chargers, power supplies) are covered by the most applicable standard, IEC 60065, IEC 60950-1 or other applicable IEC safety standards. Alternatively the general standard may be applied. HEARING INSTRUMENTS do not have a MAINS PART intended for connection to a.c. SUPPLY MAINS. The connection to the SUPPLY MAINS of a HEARING INSTRUMENT system is covered by power supply, charger or other types of ACCESSORIES. ACCESSORIES connected to a HEARING INSTRUMENT may form a HEARING INSTRUMENT SYSTEM. Only the HEARING INSTRUMENT and its detachable parts are subject to all applicable clauses of this particular standard. The remaining components of the HEARING INSTRUMENT SYSTEM are subject to requirements of this particular standard that result from their connection to the HEARING INSTRUMENT SYSTEM. Programming interfaces or ACCESSORIES in a clinical application are covered by the general standard. NOTE Detachable parts of HEARING INSTRUMENTS even if supplied separately (e.g. ear hooks, domes, wax guards etc.), are not regarded as ACCESSORIES. This standard does not apply to: – cochlear implants or other implanted HEARING INSTRUMENTS; – bone conduction HEARING INSTRUMENTS; – educational HEARING INSTRUMENTS (i.e. group HEARING INSTRUMENTS, auditory trainers etc.); – the application of a HEARING INSTRUMENT for the measurement of hearing levels. IEC 60645-1 applies; – audio-frequency induction-loop systems or their component parts, as described in IEC 60118-4 and IEC 62489-1; – assisted HEARING INSTRUMENT SYSTEMS using infra-red or radio; – the sound generating function of a tinnitus masker.
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
- ICS
- 11.180.15
- CCS
- 发布
- 2017-10-03
- 实施
Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids (IEC 60118-0:2015); German version EN 60118-0:2015
- ICS
- 11.180.15
- CCS
- L31
- 发布
- 2016-09
- 实施
Scope is not provided for this standard
Assistive products for persons with vision impairments and persons with vision and hearing impairments -- Acoustic and tactile signals for pedestrian traffic lights
- ICS
- 11.180.15
- CCS
- 发布
- 2015-12-21
- 实施
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components (IEC 62489-1:2010 + A1:2014); German version EN 62489-1:2010 + A1:2015
- ICS
- 11.180.15
- CCS
- L31
- 发布
- 2015-10
- 实施
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems (IEC 60601-2-66:2012); German version EN 60601-2-66:2013
- ICS
- 11.180.15
- CCS
- C39
- 发布
- 2015-08
- 实施
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure (I
- ICS
- 11.180.15
- CCS
- L31
- 发布
- 2015-08
- 实施
This part of IEC 60118 is applicable to audio-frequency induction-loop systems producing an alternating magnetic field at audio frequencies and intended to provide an input signal for hearing aids operating with an induction pick-up coil (telecoil). Throughout this standard@ it is assumed that the hearing aids used with it conform to all relevant parts of IEC 60118. This standard specifies requirements for the field strength in audio-frequency induction loops for hearing aid purposes@ which will give adequate signal-to-noise ratio without overloading the hearing aid. The standard also specifies the minimum frequency response requirements for acceptable intelligibility. Methods for measuring the magnetic field strength are specified@ and information is given on appropriate measuring equipment (see Annex B)@ information that should be provided to the operator and users of the system (see Annex C)@ and other important considerations. This standard does not specify requirements for loop driver amplifiers or associated microphone or audio signal sources@ which are dealt with in IEC 62489-1@ or for the field strength produced by equipment@ such as telephone handsets@ within the scope of ITU-T P.370.
Electroacoustics - Hearing aids - Part 4: Induction loop systems for hearing aid purposes - System performance requirements
- ICS
- 11.180.15
- CCS
- 发布
- 2014-12
- 实施
- 2017-11-11
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
- ICS
- 11.180.15
- CCS
- L31
- 发布
- 2014-12
- 实施
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
- ICS
- 11.180.15
- CCS
- L31
- 发布
- 2014-12
- 实施
- 2014-12-20
Specification of Performance Measurement of Hearing Assistance Devices/Systems
- ICS
- 11.180.15
- CCS
- C32
- 发布
- 2014-01-01
- 实施
Medical electrical equipment - Part 2-66 : particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
- ICS
- 11.180.15
- CCS
- C39;C32
- 发布
- 2013-05-17
- 实施
- 2013-05-17
The scope of this Technical Report is to provide a quick overview over the requirements and tests of IEC 60601-2-66 in combination with the applicable sections of the general standard and collateral standards. It is intended to assist various groups invol
Summary of requirements and tests to products in the scope of IEC 60601-2-66
- ICS
- 11.180.15
- CCS
- 发布
- 2013-03-14
- 实施
- 2013-03-14
IEC 60601-2-66:2012 International Standard applies to the basic safety of hearing instruments and hearing instrument systems. Hazards inherent in the intended physiological function of hearing instruments or hearing instrument systems within the scope of
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
- ICS
- 11.180.15
- CCS
- 发布
- 2013-03-02
- 实施
- 2013-03-02
Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
- ICS
- 11.180.15
- CCS
- C39
- 发布
- 2013-02-28
- 实施
- 2013-02-28
