ASTM F1387-23
管道和卡套管机械连接配件性能标准规范

Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings

ASTM F1387-23 发布历史

ASTM F1387-23由美国材料与试验协会 US-ASTM 发布于 2023-07-01。

ASTM F1387-23在国际标准分类中归属于: 23.060.01 阀门综合。

ASTM F1387-23 管道和卡套管机械连接配件性能标准规范的最新版本是哪一版？

最新版本是 ASTM F1387-23 。

ASTM F1387-23 发布之时，引用了标准

• ANSI/ASQ Z1.4 按属性检查用取样程序和表
• ANSI/NCSL Z540 表示测量不确定度的U.S.指南
• ASTM A1016/A1016M 铁素体合金钢、奥氏体合金钢和不锈钢管的一般要求标准规范*， 2024-05-01 更新
• ASTM A106/A106M 高温用无缝碳钢管标准规范
• ASTM A108 优质冷精整碳钢棒的标准规范
• ASTM A109/A109M 钢 带 碳（0.25最大百分比） 冷轧标准规格
• ASTM A167 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范
• ASTM A182/A182M 高温用锻造或轧制合金钢管法兰、锻造配件以及阀门和零件的标准规范
• ASTM A213/A213M 无缝铁素体和奥氏体合金 - 钢锅炉 过热器和热交换器管的标准规范
• ASTM A234/A234M 锻造碳钢和合金钢管道配件标准规范适用于中高温服务
• ASTM A249/A249M 焊接奥氏体钢锅炉、过热器、热交换器和冷凝器管的标准规范
• ASTM A262 奥氏体不锈钢粒间磁化率的检测的标准操作规程
• ASTM A269/A269M 通用无缝和焊接奥氏体不锈钢管标准规范*， 2024-03-01 更新
• ASTM A276/A276M 不锈钢棒材和型材标准规范*， 2024-02-01 更新
• ASTM A312/A312M 无缝和焊接奥氏体不锈钢管标准规范
• ASTM A335/A335M 高温用无缝铁素体合金钢管标准规范
• ASTM A370 钢铁产品机械试验的标准试验方法和定义
• ASTM A380/A380M 不锈钢零件, 设备及系统的清洗, 除垢及钝化的标准实施规程*， 2024-07-01 更新
• ASTM A403/A403M 锻制奥氏体不锈钢管配件的标准规范
• ASTM A450/A450M 碳铁素体合金和奥氏体合金钢管一般要求的标准规范
• ASTM A479/A479M 锅炉和其他压力容器用不锈钢棒材和型材的标准规范*， 2024-05-01 更新
• ASTM A53/A53M 焊接和无缝热浸镀锌/黑钢管标准规范
• ASTM A530/A530M 专用碳钢和合金钢管的一般要求标准规范
• ASTM A564/A564M 热轧和冷加工不锈钢棒和形状的标准规格
• ASTM A576 特级热锻碳素钢棒标准规格
• ASTM A967 不锈钢零件化学钝化处理的标准规范
• ASTM A999/A999M 合金和不锈钢管用一般要求的标准规范
• ASTM B111/B111M 铜和铜合金无缝冷凝器管和套圈的标准规范
• ASTM B117 操作盐雾（雾）装置的标准实施规程
• ASTM B121/B121M 含铅黄铜板材, 薄板, 带材以及轧制棒材的标准规格
• ASTM B122/B122M 铜 - 镍 - 锡合金 铜 - 镍 - 锌合金（镍银）和铜镍合金板 板 带和轧制棒的标准规范
• ASTM B124/B124M 铜和铜合金锻造棒、棒和型材的标准规范
• ASTM B154 铜和铜合金的硝酸亚汞标准试验方法
• ASTM B16/B16M 用于螺丝机的自由切割黄铜棒 棒和形状的标准规格
• ASTM B164 镍铜合金杆材、棒材和线材标准规范
• ASTM B21/B21M 船用黄铜条材、棒材和型材的标准规范*， 2024-07-01 更新
• ASTM B251/B251M 锻造无缝铜及铜合金管通用要求的标准规格*， 2024-07-01 更新
• ASTM B36/B36M 工厂制造的锻造镍和镍合金配件的标准规范
• ASTM B369/B369M 铜镍合金铸件的标准规范
• ASTM B371/B371M 铜锌硅合金棒的标准规范
• ASTM B564 镍合金锻件标准规范
• ASTM B633 钢铁表面的电沉积锌覆层标准规范
• ASTM B696 机械沉积镉涂层的标准规范
• ASTM B75/B75M 无缝铜管标准规范
• ASTM B766 镉电解沉积镀层的标准规格
• ASTM B88 无缝铜水管标准规范
• ASTM E1529 测定大型碳氢化合物池火灾对结构构件和组件影响的标准试验方法
• ASTM E511 用康铜环形箔热流计测定热流的标准试验方法
• ASTM E8/E8M 金属材料拉伸试验的标准试验方法*， 2024-01-01 更新
• SAE 1010 人力和人事标准实践
• SAE AMS2243 公差不锈钢无缝管
• SAE AMS5643 钢材、棒材和锻件，耐腐蚀 17Cr 4.5Ni 4Cu 沉淀硬化
• SAE J514 流体动力和一般用途的金属连接 第3部分：NPTF 管道适配器和 NPSM 适配器联管节*， 2023-12-01 更新
• SAE J515 用于液压连接器的 O 型圈材料规范

* 在 ASTM F1387-23 发布之后有更新，请注意新发布标准的变化。

ASTM F1387-23的历代版本如下：

• 2023年 ASTM F1387-23 管道和卡套管机械连接配件性能标准规范
• 2019年 ASTM F1387-19 管道和管道机械连接管件的性能标准规范
• 1999年 ASTM F1387-99(2012) 管道系统和配管的机械连接管件性能的标准规范
• 1999年 ASTM F1387-99(2005) 管道机械附联配件的性能标准规范
• 1999年 ASTM F1387-99 管道机械附联配件的性能标准规范
• 1998年 ASTM F1387-93(1998) 机械连接配件性能的标准规范

1.1 This specification establishes the performance characteristics required for mechanically attached fittings (MAFs) for use in piping and tubing systems. These fittings directly attach to pipe or tube by mechanical deformation of the pipe or tube or fitting, or a combination thereof, creating a seal and a restrained joint. The seal may be created via the mechanical deformation or created independently. Successful completion of the tests described constitutes completion of the technical portion of the qualification process. 1.2 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified in part or whole by the purchaser in the order. Unless otherwise specified, U.S. Navy contracts shall invoke the supplementary requirements in whole. 1.3 Unless specific MAF types are specified, the term “MAF” shall apply to all types described herein. 1.4 The tests specified in Section 13 and described in Annex A1 and the Supplementary Requirements Section are applicable only to ascertain the performance characteristics of MAFs. These tests are not intended for use in the evaluation of non-MAF products. 1.5 A fire performance test is specified in Supplementary Requirement S7. This test provides general guidelines to determine the responsiveness of MAFs when subjected to fire. This test should not be considered for use to evaluate non-MAF products. 1.6 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.7 The following safety hazards caveat applies only to the tests listed in Section 13 and the tests described in the Supplementary Requirements Section and the annexes of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

标准号

ASTM F1387-23

发布

2023年

发布单位

美国材料与试验协会

当前最新

ASTM F1387-23

 

 

引用标准

ANSI/ASQ Z1.4 ANSI/NCSL Z540 ASTM A1016/A1016M ASTM A106/A106M ASTM A108 ASTM A109/A109M ASTM A167 ASTM A182/A182M ASTM A213/A213M ASTM A234/A234M ASTM A249/A249M ASTM A262 ASTM A269/A269M ASTM A276/A276M ASTM A312/A312M ASTM A335/A335M ASTM A370 ASTM A380/A380M ASTM A403/A403M ASTM A450/A450M ASTM A479/A479M ASTM A53/A53M ASTM A530/A530M ASTM A564/A564M ASTM A576 ASTM A967 ASTM A999/A999M ASTM B111/B111M ASTM B117 ASTM B121/B121M ASTM B122/B122M ASTM B124/B124M ASTM B154 ASTM B16/B16M ASTM B164 ASTM B21/B21M ASTM B251/B251M ASTM B36/B36M ASTM B369/B369M ASTM B371/B371M ASTM B564 ASTM B633 ASTM B696 ASTM B75/B75M ASTM B766 ASTM B88 ASTM E1529 ASTM E511 ASTM E8/E8M MIL-C-15726 MIL-DTL-16232 MIL-DTL-18866 MIL-DTL-901 MIL-PRF-17331 MIL-PRF-7808 MIL-PRF-83282 MIL-STD-167-1 MIL-STD-1916 MIL-STD-777 MIL-STD-889 MIL-T-1368 MIL-T-16420 MIL-T-24107 MIL-T-8606 SAE 1010 SAE AMS-STD-753 SAE AMS2243 SAE AMS5643 SAE J514 SAE J515

ASTM F1387-23相似标准

推荐

谁引用了ASTM F1387-23 更多引用