GSO ISO 9611:2015
声学 表征通过结构传输的声源特性与传导结构的声音发射相关 测量以灵活方式安装的设备通信中心的速度

Acoustics -- Characterization of sources of structure-borne sound with respect to sound radiation from connected structures -- Measurement of velocity at the contact points of machinery when resiliently mounted

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 GSO ISO 9611:2015 前三页，或者稍后再访问。

您也可以尝试购买此标准，
点击右侧 “立即购买” 按钮开始采购（由第三方提供）。

标准号

GSO ISO 9611:2015

发布

2015年

发布单位

GSO

当前最新

GSO ISO 9611:2015

 

 

适用范围

1.1 General This International Standard specifies an approximate method of characterizing sources of structure-borne sound by the measurement of one-third-octave-band free velocity level spectra (or, if appropriate, octave-band velocity level spectra) on the supports or other connection points of machines mounted on resilient isolators. This structure-borne sound emission is considered with respect to the airborne or liquid-borne sound radiation of structures connected to the source under test. The results are only valid for applications in which the machine is mounted on sufficiently soft isolators on a sufficiently stiff and heavy foundation. NOTE 1 More conditions are given in annex H. A survey of the theoretical background is given in annex E. It is possible to satisfy the requirements for the test arrangement in almost any surroundings. Velocities measured at defined contact points give no complete description of structure-borne sound emission of the machinery. But, under specific conditions as described in this International Standard for resiliently mounted machinery, they give a subset of the source data required for a characterization. The results can be used a) to obtain data for technical specifications; b) for comparison with machines of similar type and size; and c) to obtain input data for computations on the transfer of structure-borne sound. 1.2 Frequency range The frequency range for which the method is applicable is limited by a low frequency f1 and an upper frequency f2. The low frequency limit f1 is set by the requirement that the supports vibrate freely; i.e. they are not affected by the isolators and the foundation structure on which the isolators are mounted. Annex A gives instructions on how to determine f1. The upper frequency limit f2 is determined by assuming that the supports behave as point sources of structure-borne sound. Annex B gives guidelines for the determination of f2. NOTES 2 For many machines, isolators can be selected which provide a frequency f1 between 20 Hz and 40 Hz. 3 Many machines have such a structure that f2 has a value between 1 kHz and 4 kHz. 1.3 Type of noise This International Standard applies to steady noise. 1.4 Degrees of freedom The procedures are described for all six components of the velocity: three orthogonal translational velocities and three orthogonal angular velocities. If it can be shown that, for a specific machine and a specific application, fewer components are sufficient to characterize the source, then it is permissible to reduce the number of measured components (see annex F). 1.5 Types of connection point The procedures in this International Standard are described for the main supports of a machine. The method is, however, applicable to other mounting faces at resilient elements such as the flange for a flexible coupling in the shaft of a diesel engine or the connection with pipes. In such cases, the methods for the determination of f1 and f2 (see annexes A and B) can be adapted to the unique conditions that apply.

GSO ISO 9611:2015相似标准

推荐