IEC 60051-1-1997
直接作用模拟指示电测量仪表及其附件 第1部分:定义和对所有部分通用的一般要求
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
IEC 60051-1-1997 发布历史
This standard applies to direct acting indicating electrical measuring instruments having an analogue display, such as: - ammeters and voltmeters; - wattmeters and varmeters; - frequency meters of pointer and vibrating-reed types; - phasemeters, power-factor meters and synchroscopes; - ohmmeters, impedance meters and conductance meters; - multi-function instruments of the above types. It also applies to certain accessories used with these instruments, such as: - shunts; - series resistors and impedance elements. If other accessories are associated with instruments, this standard is applicable to the combination of the instrument and the accessory provided that the adjustments have been made for the combination. This standard also applies to a direct acting indicating electrical measuring instrument whose scale marks do not correspond directly to its electrical input quantity, provided that the relationship between them is known. This standard also applies to instruments and accessories having electronic devices in their measuring and/or auxiliary circuits. This standard does not apply to special purpose instruments which are covered by their own IEC standards. This standard does not apply to special purpose devices which are covered by their own IEC standards when they are used as accessories. This standard does not contain either requirements for protection against environmental conditions or the relevant tests. However, when necessary, and then only by agreement between the manufacturer and the user, tests to approximate the conditions of use may be selected from IEC 60068. This standard does not specify requirements concerning dimensions of instruments or accessories (for the former, see IEC 60473).
IEC 60051-1-1997由国际电工委员会 IX-IEC 发布于 1997-12。
IEC 60051-1-1997 在中国标准分类中归属于: N20 电工仪器、仪表综合，在国际标准分类中归属于: 01.040.17 计量学和测量、物理现象 (词汇),17.220.20 电和磁量值的测量。
IEC 60051-1-1997的历代版本如下：
- 1984年 IEC 60051-1-1984 直接动作指示模拟电气测量仪器及其附件.第1部分:定义和对所有部分共同的一般要求
- 1997年12月 IEC 60051-1-1997 直接作用模拟指示电测量仪表及其附件 第1部分:定义和对所有部分通用的一般要求
- 2016年02月 IEC 60051-1-2016 直接作用模拟指示电测量仪表及其附件 第1部分:定义和对所有部分通用的一般要求
- 标准号
- IEC 60051-1-1997
- 发布日期
- 1997年12月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- N20
- 国际标准分类号
- 01.040.17;17.220.20
- 发布单位
- IX-IEC
- 代替标准
- IEC 60051-1-2016
- 被代替标准
- IEC 85/166/FDIS-1997 IEC 60051-1-1984 IEC 60051-1 AMD 1-1994 IEC 60051-1 AMD 2-1995
- 适用范围
- This standard applies to direct acting indicating electrical measuring instruments having an analogue display, such as: - ammeters and voltmeters; - wattmeters and varmeters; - frequency meters of pointer and vibrating-reed types; - phasemeters, power-factor meters and synchroscopes; - ohmmeters, impedance meters and conductance meters; - multi-function instruments of the above types. It also applies to certain accessories used with these instruments, such as: - shunts; - series resistors and impedance elements. If other accessories are associated with instruments, this standard is applicable to the combination of the instrument and the accessory provided that the adjustments have been made for the combination. This standard also applies to a direct acting indicating electrical measuring instrument whose scale marks do not correspond directly to its electrical input quantity, provided that the relationship between them is known. This standard also applies to instruments and accessories having electronic devices in their measuring and/or auxiliary circuits. This standard does not apply to special purpose instruments which are covered by their own IEC standards. This standard does not apply to special purpose devices which are covered by their own IEC standards when they are used as accessories. This standard does not contain either requirements for protection against environmental conditions or the relevant tests. However, when necessary, and then only by agreement between the manufacturer and the user, tests to approximate the conditions of use may be selected from IEC 60068. This standard does not specify requirements concerning dimensions of instruments or accessories (for the former, see IEC 60473).