BS EN 61810-7-2006
机电式单元继电器.试验和测量程序

Electromechanical elementary relays - Test and measurement procedures

BS EN 61810-7-2006 发布历史

This part of IEC 61810 states the test and measurement procedures for electromechanical elementary relays. It covers basic considerations which are, in general, common to all types of electromechanical elementary relays. Supplementary requirements may be necessitated by specific designs or application. The test and measurement procedures of this standard are described as individual provisions covering a specific requirement. When combining them in a test programme, care must be taken (for example by suitable grouping of tested relays) to ensure that preceding tests do not devalue subsequent ones. Where in this standard the term “specified” is used, this means a prescription in the appropriate documentation for the relay, for example manufacturer’s data sheet, test specification, customer detail specification. For application within the IECQ system such prescriptions are contained in the detail specification as defined in Clause A.7 of QC 001001. NOTE 1 To improve the readability of this standard, the term “relay” is generally used in place of “electromechanical elementary relay”. NOTE 2 Requirements and tests related to the type testing of electromechanical elementary relays are contained in IEC 61810-1. For that purpose, the generally described test and measurement procedures of this standard have been prescribed in a more restricted and stringent form in IEC 61810-1. NOTE 3 Standards covering relays subjected to quality assessment in accordance with IECQ are compiled in the IEC 61811 series of publications.

BS EN 61810-7-2006由英国标准学会 GB-BSI 发布于 2006-07-31，并于 2006-07-31 实施。

BS EN 61810-7-2006 在中国标准分类中归属于: K33 控制继电器，在国际标准分类中归属于: 29.120.70 继电器。

BS EN 61810-7-2006 发布之时，引用了标准

• IEC 60068-2-1-1990 环境试验 第2-1部分:试验 试验A:低温
• IEC 60068-2-2-1974 基本环境试验规程 第2-2部分:试验 试验B:干热
• IEC 60068-2-6-1995 环境试验 第2-6部分:试验 试验Fc:振动(正弦)
• IEC 60068-2-7-1983 基本环境试验规程 第2-7部分:试验 试验Ga和指南:稳态加速度
• IEC 60068-2-10-2005 环境试验.第2-10部分:试验.试验J和指南:长霉

BS EN 61810-7-2006的历代版本如下：

• 2006年07月31日 BS EN 61810-7-2006 机电式单元继电器.试验和测量程序

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS EN 61810-7-2006 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS EN 61810-7-2006

发布日期

2006年07月31日

实施日期

2006年07月31日

废止日期

无

中国标准分类号

K33

国际标准分类号

29.120.70

发布单位

GB-BSI

引用标准

IEC 60068-2-1-1990 IEC 60068-2-2-1974 IEC 60068-2-6-1995 IEC 60068-2-7-1983 IEC 60068-2-10-2005

被代替标准

04/30112662 DC-2004

适用范围

This part of IEC 61810 states the test and measurement procedures for electromechanical elementary relays. It covers basic considerations which are, in general, common to all types of electromechanical elementary relays. Supplementary requirements may be necessitated by specific designs or application. The test and measurement procedures of this standard are described as individual provisions covering a specific requirement. When combining them in a test programme, care must be taken (for example by suitable grouping of tested relays) to ensure that preceding tests do not devalue subsequent ones. Where in this standard the term “specified” is used, this means a prescription in the appropriate documentation for the relay, for example manufacturer’s data sheet, test specification, customer detail specification. For application within the IECQ system such prescriptions are contained in the detail specification as defined in Clause A.7 of QC 001001. NOTE 1 To improve the readability of this standard, the term “relay” is generally used in place of “electromechanical elementary relay”. NOTE 2 Requirements and tests related to the type testing of electromechanical elementary relays are contained in IEC 61810-1. For that purpose, the generally described test and measurement procedures of this standard have been prescribed in a more restricted and stringent form in IEC 61810-1. NOTE 3 Standards covering relays subjected to quality assessment in accordance with IECQ are compiled in the IEC 61811 series of publications.

BS EN 61810-7-2006系列标准