BS 5871-2-2005
燃气炉、对流式加热器、回火锅炉和装饰性燃料气体器具的安装和维修规范.输入热量不超过15kW的插入式燃料气体炉和回火锅炉(2类和3类家用燃气)

Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances — Part 2: Inset live fuel effect gas fires of heat input not exceeding 15 kW, and fire/back boilers (

BS 5871-2-2005 发布历史

This part of BS 5871 specifies installation and maintenance requirements for inset live fuel effect gas fires of heat input not exceeding 15 kW (16.6 kW based on gross calorific value) burning 2nd and 3rd family gases for the purpose of heating rooms or spaces in domestic (see Note 5) or commercial premises. Combined appliances of the type where a fire is used in conjunction with a boiler or circulator are also covered in so far as the installation of the combined appliance is concerned. The standard is applicable to appliances intended for installation either: a) within a builder's opening and/or fireplace recess and which may, additionally, be suitable for installation in a purpose designed metal flue box conforming to BS 715 and flue conforming to the constructional and temperature requirements of BS EN 1856-1 and BS EN 1856-2; or b) using a direct flue connection, if specified in the manufacturer's instructions; or c) in the case of a room sealed appliance, using a flue terminal/air duct assembly supplied by the appliance manufacturer. This standard covers the selection of a suitable appliance, the ventilation and flueing requirements, and other measures necessary to ensure a safe installation. The central heating and/or hot water system connected to a combined appliance is not within the scope of this standard and reference should be made to BS 5449 (see Note 6) and BS 5546 for this part of such an installation. This standard is not applicable to mobile and portable appliances conforming to BS EN 449 or to appliances in touring caravans. Additional requirements for the installation of fire/back boilers and fire/back circulators are specified in Clauses 15, 16, 17 and 18. NOTE 1 Inset live fuel effect gas fires differ from decorative fuel effect gas appliances, which burn gas so as to simulate a solid fuel fire or produce other decorative effects, in that they incorporate a heat exchanger and restrict the passage of the products of combustion between the appliance firebed and the chimney or flue. The only decorative fuel effect gas appliances covered by this part of BS 5871 are those shown in Figure lb) and detailed in 1d) of the commentary and recommendations on Clause 5 of this standard. NOTE 2 Unless the context requires otherwise, inset live fuel effect gas fires are hereinafter referred to as fires. NOTE 3 Heat inputs in this document are based on net calorific value. Figures based on gross calorific value are given in parenthesis where deemed necessary. See also Clause 5, commentary and recommendations g). NOTE 4 Attention is drawn to the foreword concerning the installation of used appliances. NOTE 5 As well as normally constructed dwellings, domestic premises include any permanently sited caravan holiday homes, residential park homes and permanently moored boats. See IGE/UP/8 [8]. NOTE 6 BS 5449 has been partly replaced by BS EN 12828 and BS EN 12831, and is to be withdrawn once BS EN 14336 and BS EN 14337 are published.

BS 5871-2-2005由英国标准学会 GB-BSI 发布于 2005-04-13，并于 2005-07-11 实施。

BS 5871-2-2005 在中国标准分类中归属于: Q82 供气器材设备，在国际标准分类中归属于: 97.100.20 气体加热器。

BS 5871-2-2005 发布之时，引用了标准

• BS 7977-2 家用燃气用具能量的合理使用和安全性规范.组合设备.燃气锅炉/家用热水炉
• BS 715 不超过20千瓦的燃气器具用金属排气箱规范*， 2005-11-01 更新
• BS 5440-1 额定热输入不超过70kW的燃气器具用烟道及通风设备(第1、2和3类家用燃气).烟囱燃气器具的安装和烟囱的维修用规范*， 2008-03-31 更新
• BS 5440-2 额定热输入量不超过70 kW的燃气器具的烟道及通风装置的安装和维修(1类、2类和3类家用煤气).燃气器具用通风装置的安装和维修规范*， 2009-12-31 更新
• BS 5449 家庭住宅强制循环热水中央供暖系统规范
• BS 5482-1 家用丁烷和丙烷燃气装置的操作规程.永久性住宅,居住区公园和商业化处所中的钢管尺寸不超过DN25和波纹不锈钢或铜管尺寸不超过DN28的装置
• BS 5482-2 家用丁烷和丙烷燃气装置.旅居车与非永久性住宅中的装置
• BS 5546 额定输入不超过70kW的家用燃气供热水装置的安装和维修规范 *， 2010-06-30 更新
• BS 6700 建筑物和其庭园中家用供水装置的设计,安装,试验和维护*， 2006-12-29 更新
• BS 6891 楼宇内小于等于35 mm (R1?) 的低压气体安装管道工程的安装和维护规范*， 2015-11-30 更新
• BS 7671 电气装置的要求. IET布线规则. 第十七版*， 2013-08-01 更新
• BS 7977-1 家用燃气用具能量的合理使用和安全性规范.辐射器/对流散热器*， 2009-07-31 更新
• BS EN 1856-1 *， 2010-04-30 更新
• BS EN 1856-2 *， 2010-04-30 更新
• BS EN 13502 烟囱.泥土/陶瓷烟道口的要求和试验方法

* 在 BS 5871-2-2005 发布之后有更新，请注意新发布标准的变化。

BS 5871-2-2005的历代版本如下：

• 2005年04月13日 BS 5871-2-2005 燃气炉、对流式加热器、回火锅炉和装饰性燃料气体器具的安装和维修规范.输入热量不超过15kW的插入式燃料气体炉和回火锅炉(2类和3类家用燃气)

非常抱歉，我们暂时无法提供预览，您可以试试： 免费下载 BS 5871-2-2005 前三页，或者稍后再访问。

注意： 点击下载后，生成下载文件时间比较长，请耐心等待......

标准号

BS 5871-2-2005

发布日期

2005年04月13日

实施日期

2005年07月11日

废止日期

无

中国标准分类号

Q82

国际标准分类号

97.100.20

发布单位

GB-BSI

引用标准

BS 7977-2 BS 715 BS 1289 BS 4543-2 BS 4543-3 BS 5440-1 BS 5440-2 BS 5449 BS 5482-1 BS 5482-2 BS 5546 BS 6700 BS 6891 BS 7435-1 BS 7435-2 BS 7671 BS 7977-1 BS EN 1856-1 BS EN 1856-2 BS EN 13502

被代替标准

03/320605 DC-2003

适用范围

This part of BS 5871 specifies installation and maintenance requirements for inset live fuel effect gas fires of heat input not exceeding 15 kW (16.6 kW based on gross calorific value) burning 2nd and 3rd family gases for the purpose of heating rooms or spaces in domestic (see Note 5) or commercial premises. Combined appliances of the type where a fire is used in conjunction with a boiler or circulator are also covered in so far as the installation of the combined appliance is concerned. The standard is applicable to appliances intended for installation either: a) within a builder's opening and/or fireplace recess and which may, additionally, be suitable for installation in a purpose designed metal flue box conforming to BS 715 and flue conforming to the constructional and temperature requirements of BS EN 1856-1 and BS EN 1856-2; or b) using a direct flue connection, if specified in the manufacturer's instructions; or c) in the case of a room sealed appliance, using a flue terminal/air duct assembly supplied by the appliance manufacturer. This standard covers the selection of a suitable appliance, the ventilation and flueing requirements, and other measures necessary to ensure a safe installation. The central heating and/or hot water system connected to a combined appliance is not within the scope of this standard and reference should be made to BS 5449 (see Note 6) and BS 5546 for this part of such an installation. This standard is not applicable to mobile and portable appliances conforming to BS EN 449 or to appliances in touring caravans. Additional requirements for the installation of fire/back boilers and fire/back circulators are specified in Clauses 15, 16, 17 and 18. NOTE 1 Inset live fuel effect gas fires differ from decorative fuel effect gas appliances, which burn gas so as to simulate a solid fuel fire or produce other decorative effects, in that they incorporate a heat exchanger and restrict the passage of the products of combustion between the appliance firebed and the chimney or flue. The only decorative fuel effect gas appliances covered by this part of BS 5871 are those shown in Figure lb) and detailed in 1d) of the commentary and recommendations on Clause 5 of this standard. NOTE 2 Unless the context requires otherwise, inset live fuel effect gas fires are hereinafter referred to as fires. NOTE 3 Heat inputs in this document are based on net calorific value. Figures based on gross calorific value are given in parenthesis where deemed necessary. See also Clause 5, commentary and recommendations g). NOTE 4 Attention is drawn to the foreword concerning the installation of used appliances. NOTE 5 As well as normally constructed dwellings, domestic premises include any permanently sited caravan holiday homes, residential park homes and permanently moored boats. See IGE/UP/8 [8]. NOTE 6 BS 5449 has been partly replaced by BS EN 12828 and BS EN 12831, and is to be withdrawn once BS EN 14336 and BS EN 14337 are published.

BS 5871-2-2005系列标准

谁引用了BS 5871-2-2005 更多引用