01.040.21 机械系统和通用件 (词汇) 标准查询与下载

GB/T 36239-2018 特种机器人 术语

本标准界定了与特种机器人相关的基本名词、术语和定义。 本标准适用于特种机器人的设计、生产、售后、科研、教学、管理等领域。

Special robot.Terms

GB/T 16948-1997 技术产品文件 词汇 投影法术语

本标准规定了投影法的术语及其定义，适用于各类技术图样与有关技术文件，以及工程技术手册、教材等出版物。

Technical product documentation--Vocabulary--Terms relating to projection methods

GB/T 12204-1990 金属切削基本术语

本标准规定了金属切削用基本术语及其定义，部分术语的符号和计量单位。 本标准适用于金属切削专业中正式出版发行的标准和书刊。

Glossary of general terms in metal cutting

T/SDBSJX 006-2023 中小企业数字化转型指南

1.范围    介绍本文件的主要内容以及本文件所适用的领域。    2.规范性引用文件    列出了本文件的规范性引用文件。    3.术语和定义    列明标准中的术语和定义适用于本文件。  4.数字化框架 介绍了数字化转型标准的整体架构。 5.采销数字化 企业在采购、销售、库存管理等环节，通过数字化技术实现采购销售数字化的标准要求。 6.研发数字化 产品研发过程中，通过技术手段，实现产品设计数字化的标准要求。 7.生产数字化 生产制造过程中，通过物联网、工业互联网等技术手段，实现生产过程数字化的标准要求。 8.管理数字化 企业经营管理过程中，通过信息技术手段，实现办公、财务等企业管理环节数字化的标准要求。 9.资源生态化 企业通过融入第三方平台或产业合作的方式，广泛获得有助于企业发展各种资源的标准要求。 10.数据资产化 企业在数据收集、存储、处理和应用过程中，实现数据的共享、开放以及安全管理的的标准要求。

Guide to digital transformation for small and medium-sized enterprises

ASTM F1789-23 F16机械紧固件的标准术语

Standard Terminology for F16 Mechanical Fasteners

T/CMEPCA 004-2023 质量分级及“领跑者”评价要求 电机

本文件规定了电机产品质量及企业标准水平的基本要求、评价指标及要求、评价方法及等级划分。

3.Assessment requirements for quality grading and forerunner — motor

T/CMEPCA 001-2023 绿色低碳机电产品评价导则

本文件规定了绿色低碳机电产品的评价原则、评价指标、评价方法三方面相关内容。

Guidelines for the evaluation of green low-carbon electro-mechanical products

T/CMEPCA 002-2023 绿色低碳机电产品标识规范

本文件界定了绿色低碳机电产品的术语和定义、规定了基本原则、标注要求、标识申请、监督和管理等。

Green low-carbon electromechanical product labeling specification

GH/T 1417-2023 食用菌培养基用蒸汽灭菌器

本标准适用于承压的食用菌培养基用灭菌器，包括方型和圆型灭菌器，用于食用菌培养基种植前的灭菌。

Steam sterilizer for edible fungi culture medium

T/CIET 032-2023 门电机自动检测设备

本文件规定了门电机自动检测设备的相关术语、型号及基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存要求。 本文件适用于门电机自动检测设备（以下简称设备）。

Door motor automatic detection equipment

ISO 5593:2023 滚动轴承.词汇

Rolling bearings — Vocabulary

ASTM F1789-22 F16机械紧固件标准术语

1.1 This terminology standard provides a compilation of definitions for terminology used for mechanical fasteners. 1.2 Terms in this terminology are organized alphabetically. In Appendix X1 they are listed under fastener characteristic. 1.3 Additional definitions are shown in ANSI/ASME B18.12; IFI Glossary of Terms, IFI-139 and IFI-140; and SAE J412. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for F16 Mechanical Fasteners

ISO/TR 10825-2:2022 齿轮.轮齿的磨损和损坏.第2部分:补充信息

Gears — Wear and damage to gear teeth — Part 2: Supplementary information

ISO 10825-1:2022 齿轮.轮齿的磨损和损坏.第1部分：术语和特性

This document provides nomenclature for general modes of gear tooth wear and failure. It classifies, identifies, and describes the most common types of failure and provides information that, in many cases, enables the user to identify failure modes and evaluate the degree or change from original condition. This document is based on experience with steel gears; however, many of the failure modes discussed apply to gears made from other materials. Not all failure modes that can occur on other types of gears, such as plastic, bronze, or powder metal gears, are included. The solution to many gear problems requires detailed investigation and analysis by specialists and is beyond the scope of this document. This document specifies only the terminology intended to help with the identification and reporting of the appearance and conditions of gears after a period of operation. Neither causes nor preventive measures for any condition described are discussed. In this document, gear refers to both gear wheels and pinions, unless the gear is specifically identified. This document does not define “gear failure”.

Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics

ASTM F2488-05(2022) 滚动轴承的标准术语

1.1 This terminology covers terms and their definitions relevant to the materials and processes associated with rolling element bearings. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Rolling Element Bearings

KS B ISO 10825-2021 齿轮 轮齿的磨损和损坏 术语

Gears－Wear and damage to gear teeth－Terminology

DS/EN ISO 1891-2:2021 紧固件“术语”第2部分：涂层的词汇和定义“修正案 1（ISO 1891-2:2014/Amd 1:2020）

Fasteners – Terminology – Part 2: Vocabulary and definitions for coatings – Amendment 1 (ISO 1891-2:2014/Amd 1:2020)

EN ISO 1891-2:2014/A1:2021 紧固件.术语.第2部分:词汇和涂料的定义 包含修改件A1,2021

Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)

PNS ISO 1132-1:2021 滚动轴承.公差.第1部分：术语和定义

Rolling bearings - Tolerances - Part 1: Terms and definitions

PNS ISO 4378-1:2021 滑动轴承.术语，定义，分类和符号.第1部分：设计，轴承材料及其特性

Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties