13.020.40 污染、污染控制和保护 标准查询与下载

GSO ISO 22526-3:2023 塑料 生物基塑料的碳和环境足迹 第3部分：过程碳足迹、量化要求和指南

This document specifies requirements and guidelines for the quantification and reporting of the process carbon footprint of biobased plastics (see ISO 22526-1), being a partial carbon footprint of a bioplastic product, based on ISO 14067 and consistent with International Standards on life cycle assessment (ISO 14040 and ISO 14044). This document is applicable to process carbon footprint studies (P-CFP) of plastic materials, being a partial carbon footprint of a product, whether or not the results are intended to be publicly available. Requirements and guidelines for the quantification of a partial carbon footprint of a product (partial CFP) are provided in this document. The process carbon footprint study is carried out according to ISO 14067 as a partial carbon footprint, using the specific conditions and requirements specified in this document. Where the results of a P-CFP study are reported according to this document, procedures are provided to support transparency and credibility, and also to allow for informed choices. Offsetting is outside of the scope of this document.

Plastics — Carbon and environmental footprint of biobased plastics — Part 3: Process carbon footprint, requirements and guidelines for quantification

GSO ISO 22526-1:2023 塑料 生物基塑料的碳和环境足迹 第1部分：一般原则

This document specifies the general principles and the system boundaries for the carbon and environmental footprint of biobased plastic products. It is an introduction and a guidance document to the other parts of the ISO 22526 series. This document is applicable to plastic products and plastic materials, polymer resins, which are based from biobased or fossil-based constituents.

Plastics — Carbon and environmental footprint of biobased plastics — Part 1: General principles

GSO ISO 22526-2:2023 塑料 生物基塑料的碳和环境足迹 第2部分：材料碳足迹、从空气中去除并纳入聚合物分子中的二氧化碳量（质量）

This document defines the material carbon footprint as the amount (mass) of CO2 removed from the air and incorporated into plastic, and specifies a determination method to quantify it. This document is applicable to plastic products, plastic materials and polymer resins that are partly or wholly based on biobased constituents.

Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule

ISO/DIS 17273:2023 天然水体水产养殖设施的废物管理和减少 原则和准则

Waste management and reduction from aquaculture facilities in natural water bodies – Principles and guidelines

ISO/FDIS 19694-7:2023 固定源排放 能源密集型产业温室气体排放的测定 第7部分：半导体和显示器产业

Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 7: Semiconductor and display industries

ISO 5430:2023 塑料 海洋环境中使用的可生物降解塑料材料和产品的可溶性分解中间体的生态毒性测试方案 测试方法和要求

This document specifies test methods and evaluation criteria by addressing potential ecotoxicological adverse effects on marine organisms. Adverse effects on marine species can be caused by soluble degradation products of plastic materials such as intermediates or remaining residues resulting from the biodegradation of plastic materials that are used in products for marine applications (e.g. nets for fish farming, dolly ropes, floats, buoys and other non-fishing applications) and which are used in different marine zones, e.g. eulittoral, sublittoral or pelagic zones. The ecotoxicity testing scheme covers marine organisms from four trophic levels, primary producer, primary and secondary consumers and decomposer: — toxicity to marine algae, — toxicity to marine invertebrates, — toxicity to marine fish, — toxicity to marine microorganisms. This document is not suitable for the assessment of adverse effects caused by solid materials of any size.

Plastics — Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment — Test methods and requirements

ISO 14066:2023 环境信息 验证和核实环境信息的团队的能力要求

Environmental information — Competence requirements for teams validating and verifying environmental information

ISO 4484-3:2023 纺织品和纺织产品 纺织品中的微塑料 第 3 部分：通过家庭洗涤方法测量从纺织品最终产品中释放的收集材料质量

This document specifies a method for measuring the collected material mass released from the outlet hose of a standard washing machine, described in ISO 6330, through the washing process. NOTE The washing condition of textile end products is indicated by the care labelling according to ISO 3758. This document is applicable to textile end products (including consumer textile products, such as clothing made of fleece, shirts, trousers, blouse, etc.) and home textile end products (such as, blankets, rugs, curtains, etc.) which are composed of all fibres such as natural fibres, and man-made fibres, including mixture of the fibres that can be washed in a domestic washing machine. This document is not applicable to fabrics and cut textile products. It does not cover the test for washing machines and detergents as well.

Textiles and textile products — Microplastics from textile sources — Part 3: Measurement of collected material mass released from textile end products by domestic washing method

DB53/T 1163-2023 农村生活污水治理技术指南

Technical Guidelines for Rural Domestic Sewage Treatment

DB53/T 1170-2023 历史遗留冶炼渣堆原位风险管控技术指南

Technical guide for in-situ risk management and control of historical smelting slag piles

T/CAQI 327-2023 农村黑臭河流治理技术导则

本文件为农村黑臭水体治理提供方法和技术指导，构建了农村黑臭水体治理技术库，适用于农村黑臭水体的治理工作。

Technical Guidelines for Controlling Black and Odor Rivers in Rural Areas

T/CIET 053-2023 工业用地 土壤污染修复技术规范

本文件规定了工业用地土壤污染修复的基本原则和工作程序、土壤污染修复技术、选择修复模式、筛选修复技术、制定修复方案以及编制修复方案等内容。 本文件适用于工业用地土壤污染程度的评价分级和修复技术方案的设计。

Technical specifications for soil pollution remediation of industrial land

EN ISO 14083:2023 温室气体.运输链运营产生的温室气体排放量的量化和报告

This document establishes a common methodology for the quantification and reporting of greenhouse gas (GHG) emissions arising from the operation of transport chains of passengers and freight.

Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations (ISO 14083:2023)

T/CAEPI 65-2023 固定污染源烟气自动监控监测系统 运行维护技术指南

本文件规定了固定污染源烟气自动监控监测系统运行维护单位进行运行维护的基本条件、运行维护工作准备、运行维护工作开展、运行维护报告。 本文件适用于固定污染源烟气自动监控监测系统的运行维护等工作。

Technical Guidelines for Operation and Maintenance of Stationary Pollution Source Flue Gas Automatic Monitoring and Monitoring System

T/CAEPI 66-2023 水污染源自动监控监测系统 运行维护技术指南

本文件规定了水污染源自动监控监测系统运行维护单位进行运行维护的基本条件、运行维护工作准备、运行维护工作开展、运行维护报告等要求。 本文件适用于水污染源自动监控监测系统的运行维护等工作。

Technical guide for operation and maintenance of water pollution source automatic monitoring and monitoring system

DB2102/T 0076-2023 温泉旅游利用水污染物排放规范

Specifications for Discharge of Water Pollutants Used in Hot Spring Tourism

T/CSES 93-2023 环水有机农业水土协同保护技术导则

（1）范围；（2）规范性引用文件；（3）术语和定义；（4）产地环境调查与适宜性评估；（5）生产基地整体规划；（6）土壤培肥；（7）病虫草害防控；（8）土壤与水分管理；（9）运营与维护

Technical guideline for soil and water quality co-protection through organic agriculture around water body

T/HAEPCI 50-2023 煤矿矿井涌水末端治理技术指南

本标准规定了煤矿矿井涌水末端治理的术语和定义、一般要求、末端治理技术、矿井涌水处理站（厂）运行与维护的技术要求

Technical guideline for end treatment of coal mine inflow

T/HAEPCI 51-2023 小型农村生活污水处理设施技术规范

本标准规定了小型农村生活污水处理设施的术语和定义、场址选择与总体布局、设计、施工与质量验收、运行维护与管理。

Technical specification for small ruraldomestic wastewater treatment facilities

T/CI 035-2023 红树林抗污染生态修复技术规程

4　生态修复原则 生态优先，整体保护 突出红树林生态与服务功能，全面加强保护，维护红树林生境连通性和生物多样性，对红树林生态系统角度实施整体保护。 尊重自然，科学修复 遵循红树林生态系统演替规律和内在机理，科学评估确定红树林适宜恢复区域，采用自然恢复为主和适度人工修复相结合的方式实施生态修复，优先选用乡土红树植物树种，禁止使用外来物种，避免使用大规模地形改造和客土。 因地制宜，有序推进 根据各个区域自然条件和土地使用现状，首先在红树林宜林地内开展修复，逐步扩大到其他适宜恢复和重建区域。 分级负责，长效管护 明确红树林保护修复责任，基于红树林生长特性及其生长环境，在红树林生态修复工程实施后，做好抚育管护、延长管护期限、加大管护力度，确保生态修复成效。

Technical regulation for mangrove ecological restoration to resist environmental pollution