13.040.35 清洁室（无菌室）及相关受控环境 标准查询与下载

GOST R ISO 14644-4-2002 无尘室及相干受控环境.第4部分:设计,施工和启动

Настоящий стандарт устанавливает требования к проектированию и строительству (монтажу) чистых помещений, включая ввод в эксплуатацию и а

Cleanrooms and associated controlled environments. Part 4. Design, construction and start-up

GOST ISO 14644-1-2002 净化室及其有关的控制环境.空气纯度分类

Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness

BS EN ISO 14644-4:2001 洁净室和相关控制环境.设计,建造和启动

This part of ISO 14644 specifies requirements for the design and construction of cleanroom installations but does not prescribe specific technological or contractual means to meet these requirements. It is intended for use by purchasers, suppliers and designers of cleanroom installations and provides a checklist of important parameters of performance. Construction guidance is provided, including requirements for start-up and qualification. Basic elements of design and construction needed to ensure continued satisfactory operation are identified through the consideration of relevant aspects of operation and maintenance. NOTE Further guidance in respect of the above requirements is given in annexes A to H. Other parts of ISO 14644 may provide complementary information. Application of this part of ISO 14644 is restricted in the following: — user requirements are represented by purchaser or specifier; — specific processes to be accommodated in the cleanroom installation are not specified; — fire and safety regulations are not considered specifically; the appropriate national and local requirements should be respected; — process media and utility services are only considered with respect to their routing between and in the different zones of cleanliness; — regarding initial operation and maintenance, only cleanroom construction-specific requirements are considered.

Cleanrooms and associated controlled environments. Design, construction and start-up

DS/EN ISO 14644-4:2001 洁净室和相关的受控环境 第4部分：设计、建造和启动

This standard specifies the requirements for the design and construction of cleanroom installations but does not prescribe specific technological or contractual means to meet the requirements. It is intended for use by purchasers, suppliers and designers of cleanroom installations and provides a checklist of important parameters of performance. Construction guidance is provided, including requirements for start up and qualification. Basic elements of design and construction needed to ensure continued satisfactory operation are identified through the consideration of relevant aspects of operation and maintenance.

Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up

SANS 14644-1:1999 无尘室及相应的受控环境．第1部分：空气清洁度分类

Covers the classification of air cleanliness in cleanrooms and associated controlled environments exclusively in terms of concentration of airborne particles.

Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness

EN ISO 14644-4:2001 洁净室和相关控制环境.第4部分:设计,建造和启用 ISO 14644-4-2001

This part of ISO 14644 specifies requirements for the design and construction of cleanroom installations but does not prescribe specific technological or contractual means to meet these requirements. It is intended for use by purchasers, suppliers and designers of cleanroom installations and provides a checklist of important parameters of performance. Construction guidance is provided, including requirements for start-up and qualification. Basic elements of design and construction needed to ensure continued satisfactory operation are identified through the consideration of relevant aspects of operation and maintenance.NOTE Further guidance in respect of the

Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001)

ISO 14644-4:2001 洁净室和相关控制环境 第4部分：设计、建造和启用

This part of ISO 14644 specifies requirements for the design and construction of cleanroom installations but does not prescribe specific technological or contractual means to meet these requirements. It is intended for use by purchasers, suppliers and designers of cleanroom installations and provides a checklist of important parameters of performance. Construction guidance is provided, including requirements for start-up and qualification. Basic elements of design and construction needed to ensure continued satisfactory operation are identified through the consideration of relevant aspects of operation and maintenance. NOTE Further guidance in respect of the above requirements is given in annexes A to H. Other parts of ISO 14644 may provide complementary information. Application of this part of ISO 14644 is restricted in the following: — user requirements are represented by purchaser or specifier; — specific processes to be accommodated in the cleanroom installation are not specified; — fire and safety regulations are not considered specifically; the appropriate national and local requirements should be respected; — process media and utility services are only considered with respect to their routing between and in the different zones of cleanliness; — regarding initial operation and maintenance, only cleanroom construction-specific requirements are considered.

Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up

DIN EN ISO 14644-2:2001 洁净室和相关控制环境.第2部分:证实与ISO 14644-1(ISO 14644-2:2000) 保持一致的试验和监测规范 德文版本 EN ISO 14644-2:2000

Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000); German version EN ISO 14644-2:2000

DS/EN ISO 14644-2:2001 洁净室和相关受控环境 第2部分：用于证明持续符合 ISO 14644-1 的测试和监控规范

This part of the standard specifies requirements for periodic testing of a cleanroom or clean zone to prove its continued compliance with 14644-1 for the designated classification of airborne particulate cleanliness.

Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

GOST R ISO 14644-2-2001 洁净室及相关受控环境.第2部分:保证持续符合ISO14644-1-2000要求的测试和监控规范

Настоящий стандарт устанавливает требования к периодическому контролю чистого помещения или чистой зоны с целью подтверждения их постоя

Cleanrooms and associated controlled environments. Part 2. Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

BS EN ISO 14644-2:2000 洁净室和相关控制环境.证明继续与ISO 14644-1相符的检测和监控规范

This part of ISO 14644 specifies requirements for periodic testing of a cleanroom or clean zone to prove its continued compliance with ISO 14644-1 for the designated classification of airborne particulate cleanliness. These requirements invoke the test described in ISO 14644-1 for classification of a cleanroom or clean zone. Additional tests are also specified, to be carried out in accordance with the requirements of this part of ISO 14644, Optional tests, to be applied at the user's discretion, are also identified. This part of ISO 14644 also specifies requirements for monitoring of a cleanroom or clean zone (hereafter referred to as an installation) to provide evidence of its continued compliance with ISO14644-1 for the designated classification of airborne particulate cleanliness.

Cleanrooms and associated controlled environments - Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

NF X44-102:2000 超净间和有关受控环境.第2部分:验证持续符合ISO 14644-1要求的测试和监测规范

Cleanrooms and associated controlled environments - Part 2 : specifications for testing and monitoring to prove continued compliance with ISO 14644-1.

EN ISO 14644-2:2000 洁净室和相关控制环境.第2部分:与ISO 14644-1连续相配位的检测和监控规范ISO 14644-2-2000

Cleanrooms and Associated Controlled Environments - Part 2: Specifications for Testing and Monitoring to Prove Continued Compliance with ISO 14644-1 ISO 14644-2:2000

ISO 14644-2:2000 洁净室和相关控制环境 第2部分:与ISO 14644-1连续相配位的检测和监控规范

This part of ISO 14644 specifies requirements for periodic testing of a cleanroom or clean zone to prove its continued compliance with ISO 14644-1 for the designated classification of airborne particulate cleanliness. These requirements invoke the test described in ISO 14644-1 for classification of a cleanroom or clean zone. Additional tests are also specified, to be carried out in accordance with the requirements of this part of ISO 14644. Optional tests, to be applied at the user's discretion, are also identified. This part of ISO 14644 also specifies requirements for monitoring of a cleanroom or clean zone (hereafter referred to as an installation) to provide evidence of its continued compliance with ISO 14644-1 for the designated classification of airborne particulate cleanliness.

Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1

VDI 2083 Blatt 12-2000 洁净室技术 安全和环境方面

The document complements Guideline VDI 2083 Part 2 with regard to safty and environmentally relevant measures necessary to control the effects which are common to all systems. Due to the wide variety of products, processes, tasks and constructional conditions applicable to cleanrooms, a guide with general comments on procedures is presented in this part of the guideline. These procedures are nor only applicable to new, modernized or disamssembled construction, but also to the extensions or close down of cleanroom installations. The correct method of disposal of installation components and operating materials is also discussed.

Cleanroom technology - Safety and environmental aspects

GOST R ISO 14644-1-2000 洁净室和相关的受控环境 第1部分： 按颗粒浓度划分空气洁净度

Cleanrooms and associated controlled environments. Part 1. Classification of air cleanliness

DS/EN ISO 14644-1:1999 洁净室和相关受控环境 第1部分：空气洁净度分类

This standard covers the classification of air cleanliness in cleanrooms and associated controlled environments, exclusively in terms of concentration of airborne particles.

Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness

BS EN ISO 14644-1:1999 洁净室和相关的控制环境.空气清洁度的分级

This part of ISO 14644 covers the classification of air cleanli-ness in cleanrooms and associated controlled environments exclusively in terms of concentration of airborne particles. Only particle populations having cumulative distributions based on threshold (lower limit) sizes ranging from 0,1 μm to 5 μm are considered for classification purposes. This part of ISO 14644 does not provide for classification of particle populations that are outside of the specified particle size range, 0,1 μm to 5 μm. Concentrations of ultrafine particles (particles smaller than 0,1 μm) and macroparticles (particles largerthan 5 μm) may be used to quantify these populations in terms of U descriptors and M descriptors, respectively. This part of ISO 14644 cannot be used to characterize the physical, chemical, radiological, or viable nature of airborne particles. NOTE The actual distribution of particle concentrations within incre-mental size ranges normally is not predictable and typically is variable over time.

Cleanrooms and associated controlled environments - Classification of air cleanliness

NF X44-101:1999 超净间和相关受控环境.第1部分:空气清洁度的分级

Cleanrooms and associated controlled environments. Part 1 : classification of air cleanliness.

DIN EN ISO 14644-1:1999 洁净室和相关控制环境.第1部分:空气清洁度分级 (ISO 14644-1:1999); 德文版本 EN ISO 14644-1:1999

The document covers the classification of air cleanliness in cleanrooms and associated controlled environments exclusively in terms of concentration of airborne particles. Only particel populations having cumulative size distributions based on threshold (lower limit) size ranging from 0,1 ?to 5 ?are considered for classification purposes.#,,#

Cleanroom and associated controlled environments - Part 1: Classification of air cleanliness (ISO 14644-1:1999); German version EN ISO 14644-1:1999