13.160 振动和冲击(与人有关的) 标准查询与下载
共找到 427 条与 振动和冲击(与人有关的) 相关的标准，共 29 页
本标准规定了人体全身振动暴露时，保持人体舒适的振动参数界限和评价准则。 本标准适用于各种运载工具或机械产生的人体全身振动环境，用以评价各种作业振动环境对人员舒适性的影响；并可作为设计各种装置或设施，评价其性能或采取振动控制措施的依据。 本标准适用于频率范围为1～80Hz的周期振动、随机振动或具有分布频谱的非周期性振动。也适用于其能量在此频带范围内的连续冲击型振动。 本标准适用于峰值因数不大于3的振动，或计权信号的峰值因数不大于6的振动。 本标准仅适用于正常健康的人。一般指可以从事正常生活起居，包括旅行，并能承受典型工作班或轮班制工作负荷的人。 本标准适用于通过主要支撑面将振动作用于立姿或坐姿的人，也适用于卧姿和斜靠姿的人。
Reduced comfort boundary and evaluation criteria for human exposure to whole-body vibration
- ICS
- 13.160
- CCS
- A25
- 发布
- 1992-04-25
- 实施
- 1992-12-01
本标准规定了在作业现场或实验室内监测和研究人体全身振动环境的通用要求和准则，是评价和比较振动环境对人体的影响应当遵循的基础规范。 本标准适用于通过支撑人体的接触面作用于人体的周期振动、随机振动或具有分布频谱的非周期性振动。作用于人体的其他振动环境（如瞬态振动、连续冲击型振动）也可参照使用。
Specification for measurement of human exposure to whole-body vibration environment
- ICS
- 13.160
- CCS
- A25
- 发布
- 1992-04-25
- 实施
- 1992-12-01
本标准规定了城市区域环境振动的测量方法。 本标准仅适用于城市区域环境振动的测量。
Measurement method of environmental vibration of urban area
- ICS
- 13.160
- CCS
- Z32
- 发布
- 1988-12-10
- 实施
- 1989-07-01
本标准规定了城市区域环境振动的标准值及适用地带范围和监测方法。 本标准适用于城市区域环境。
Standard of environmental vibration in urban area
- ICS
- 13.160
- CCS
- Z52
- 发布
- 1988-12-10
- 实施
- 1989-07-01
Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 2: Measurement and evaluation of finger systolic blood pressure
- ICS
- 13.160
- CCS
- 发布
- 2023-12-29
- 实施
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew co
- ICS
- 13.160
- CCS
- 发布
- 2023-12-29
- 实施
This document specifies minimum requirements for personal vibration exposure meters (PVEM). This document is applicable to instruments designed for measurements of whole-body vibration in the context of industrial hygiene applications (according to ISO 2631-1, ISO 2631-2 and ISO 2631-4) and/or hand-arm vibration (according to ISO 5349-1) together with the associated exposure times. This document provides specified design goals and permitted tolerances that define the minimum performance capabilities and functional requirements of instruments designed to measure personal daily vibration exposure. This document does not apply to instruments designed to measure or log exposure times without also performing vibration measurement. Instrumentation of this type is described in ISO/TR 19664.
Human response to vibration — Measuring instrumentation — Part 2: Personal vibration exposure meters
- ICS
- 13.160
- CCS
- 发布
- 2023-09-10
- 实施
Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 2: Analysis and interpretation of measurements at the fingertips
- ICS
- 13.160
- CCS
- 发布
- 2023-06-23
- 实施
Mechanical vibration and shock — Coupling forces at the man-machine interface for hand-transmitted vibration — Part 2: Evaluation of coupling forces
- ICS
- 13.160
- CCS
- 发布
- 2023-01-31
- 实施
- 2023-01
Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 1: Methods of measurement at the fingertips
- ICS
- 13.160
- CCS
- 发布
- 2022-12-29
- 实施
Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/Amd 2:2021)
- ICS
- 13.160
- CCS
- 发布
- 2022-10-19
- 实施
- 2023-01-31
Mechanical vibration — Uncertainty of the measurement and evaluation of human exposure to vibration
- ICS
- 13.160
- CCS
- 发布
- 2022-04-06
- 实施
This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load. This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins. This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3). This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance. NOTE Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)
- ICS
- 13.160
- CCS
- 发布
- 2022-03-16
- 实施
- 2022-06-30
本文件规定了傅里叶变换显微红外光谱法测定景观环境用水中微塑料的术语和定义、方法原理、仪器设备与试剂、测试样品制备、测定步骤、结果分析与计算等。 本文件适用于景观环境用水中尺寸范围在50 μm-5 mm之间的微塑料的形状、颜色、尺寸、数量和聚合物种类的测定。其他水环境中微塑料的测定可参考本方法。
Determination of microplastics in scenic environment use water —Fourier transform infrared microspectroscopy
- ICS
- 13.160
- CCS
- M746
- 发布
- 2022-02-21
- 实施
- 2022-02-24
Mechanical vibration — Description and determination of seated postures with reference to whole-body vibration
- ICS
- 13.160
- CCS
- 发布
- 2022-02-09
- 实施
Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function —Part 1: Measurement and evaluation of finger skin temperature
- ICS
- 13.160
- CCS
- 发布
- 2021-12-15
- 实施
This document specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers. Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation. Vibration test codes, as described in this document, enable the manufacturer to verify the effort regarding low vibration design.
Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)
- ICS
- 13.160
- CCS
- 发布
- 2021-12-15
- 实施
- 2022-03-31
Mechanical vibration and shock — Range of idealized values to characterize human biodynamic response under whole-body vibration
- ICS
- 13.160
- CCS
- 发布
- 2021-12-15
- 实施
Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function —Part 1: Measurement and evaluation of finger skin temperature
- ICS
- 13.160
- CCS
- 发布
- 2021-12-15
- 实施
Mechanical vibration and shock — Range of idealized values to characterize human biodynamic response under whole-body vibration
- ICS
- 13.160
- CCS
- 发布
- 2021-12-15
- 实施
