13.160 振动和冲击(与人有关的) 标准查询与下载
共找到 427 条与 振动和冲击(与人有关的) 相关的标准，共 29 页
4 技术要求 4.1 外观 4.2 规格尺寸及偏差 4.3 物理性能 4.4 撞击声压级改善量 5 试验方法 5.1 试验条件 5.2 外观 5.3 规格尺寸 5.4 物理性能 6 检验规则 6.1 出厂检验 6.2 周期性检验 6.3 型式检验 6.4 判定规则 7 标志、包装、运输与贮存
General specification for environmentally friendly acoustic shock absorbers
- ICS
- 13.160
- CCS
- C291
- 发布
- 2021-12-07
- 实施
- 2021-12-07
What is ISO 8041 ‑ 2 about? ISO 8041 ‑ 2 is second in the series of documents on instruments for measuring human exposure to vibration. ISO 8041 ‑ 2 specifies minimum requirements for personal vibration exposure meters (PVEM). ISO 8041 ‑ 2 applicable to instruments designed for measurements of whole-body...
Human response to vibration. Measuring instrumentation - Personal vibration exposure meters
- ICS
- 13.160
- CCS
- 发布
- 2021-11-30
- 实施
- 2021-11-30
This document specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion- engine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers. Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation. Vibration test codes, as described in this document, enable the manufacturer to verify the effort regarding low vibration design.
Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles
- ICS
- 13.160
- CCS
- 发布
- 2021-11-12
- 实施
Mechanical vibration. Vibrotactile perception thresholds for the assessment of nerve dysfunction. Analysis and interpretation of measurements at the fingertips
- ICS
- 13.160
- CCS
- 发布
- 2021-09-01
- 实施
- 2021-09-01
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO/FDIS 28927-13:2021)
- ICS
- 13.160
- CCS
- 发布
- 2021-09-00
- 实施
Mechanical vibration and shock－Human exposure－Biodynamic coordinate systems
- ICS
- 13.160
- CCS
- 发布
- 20210831
- 实施
- 20210831
Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace
- ICS
- 13.160
- CCS
- 发布
- 20210831
- 实施
- 20210831
1 Scope This part of ISO 13091 specifies — methods for measuring vibrotactile perception thresholds (VPTs) at the fingertips, — procedures for conducting the measurements, and — the reporting of results. Measurement methods are defined in this part of ISO 13091 for obtaining perception thresholds at the fingertips mediated, separately, by SAI, FAI and FAII mechanoreceptor populations. The methods are designed to be applicable to healthy and diseased persons, and to be suitable for clinical assessment and for screening purposes. The measurement of temporary shifts in vibrotactile perception threshold , or of thresholds at body sites other than the fingertip, is outside the scope of this part of ISO 13091.
Mechanical vibration. Vibrotactile perception thresholds for the assessment of nerve dysfunction - Methods of measurement at the fingertips
- ICS
- 13.160
- CCS
- 发布
- 2021-08-31
- 实施
- 2021-08-31
Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
- ICS
- 13.160
- CCS
- 发布
- 2021-08-31
- 实施
- 2021-08-31
Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration. Measurement and evaluation
- ICS
- 13.160
- CCS
- Z32
- 发布
- 2021-08-27
- 实施
- 2021-08-27
CPPCC Appointment Democratic Supervision Work Specifications
- ICS
- 13.160
- CCS
- A 00
- 发布
- 2021-08-23
- 实施
- 2021-08-23
This document describes the coupling parameters between the hands of a machine operator and a vibrating surface of the machine. The coupling between the hand and the vibrating surface can be described using different parameters and component parts of these parameters: — force parameters, such as push, pull and grip; — parameters such as pressure exerted on skin. In addition, Annexes A, B, C, D and E provide guidelines for measuring procedures, the measurement of the force and pressure parameters, and information on the requirements for measuring instrumentation, as well as a calibration method. This document does not deal with forces which act tangentially to the hand.
Mechanical vibration and shock — Coupling forces at the man-machine interface for hand-transmitted vibration — Part 1: Measurement and evaluation
- ICS
- 13.160
- CCS
- 发布
- 2021-08-13
- 实施
This document specifies methods and procedures for analysing and interpreting vibrotactile perception thresholds and threshold shifts. Procedures for describing statistically significant changes in vibrotactile perception thresholds are recommended. This document is applicable to vibrotactile perception thresholds determined at the fingertips according to the provisions of ISO 13091-1.
Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 2: Analysis and interpretation of measurements at the fingertips
- ICS
- 13.160
- CCS
- J04
- 发布
- 2021-08-00
- 实施
Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
- ICS
- 13.160
- CCS
- 发布
- 2021-08-00
- 实施
- 2021-08-01
Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters
- ICS
- 13.160
- CCS
- 发布
- 2021-07-15
- 实施
- 2021-07-15
ISO/TR 18570:2017 provides guidance on a supplementary method to that defined in ISO 5349‑1 for measuring and reporting hand-transmitted vibration exposures. The method defined in this document provides an improved assessment methodology for evaluating vascular hand-arm vibration risks (vibration white finger). This document does not apply for other health effects (e.g. sensorineural and musculoskeletal disorders) induced from hand-transmitted vibration exposure (see ISO 5349‑1:2001, Annex Β). ISO/TR 18570:2017 is intended to facilitate future research on hand-arm vibration risks. It can be used to supplement the data given by the ISO 5349‑1 methodology. ISO/TR 18570:2017 cannot be used as an alternative to ISO 5349‑1. Data derived from this document cannot be used in place of ISO 5349‑1 data for fulfilling duties under national regulations, guidance or recommendations for either workplace vibration exposures or machinery vibration emissions. The methodology defined in this document is based on biomechanical and epidemiological studies which are reviewed in Annex A. Also provided in Annex A is tentative information on a relationship between vibration exposure and risk of developing vascular hand-arm vibration disorders.
Mechanical vibration — Measurement and evaluation of human exposure to hand transmitted vibration — Supplementary method for assessing risk of vascular disorders
- ICS
- 13.160
- CCS
- 发布
- 2021-07-01
- 实施
Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1: Methods of measurement at the fingertips; Amendment 2
- ICS
- 13.160
- CCS
- J04
- 发布
- 2021-07-00
- 实施
Human response to vibration – Measuring instrumentation – Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
- ICS
- 13.160
- CCS
- 发布
- 2021-06-16
- 实施
- 2021-06-16
Human response to vibration – Measuring instrumentation – Part 2: Personal vibration exposure meters
- ICS
- 13.160
- CCS
- 发布
- 2021-06-03
- 实施
- 2021-06-03
Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
- ICS
- 13.160
- CCS
- 发布
- 2021-06-00
- 实施
