29.060 电线和电缆 标准查询与下载

CSA C22.2 No.38-M1986-1986 热固性绝缘电线和电缆

1. Scope 1.1 This Standard applies to single- and multiple-conductor thermoset insulated wires and cables of the sizes specified in Clause 4.1.4, intended for installation in accordance with the Rules of the Canadian Electrical Code, Part I, on systems having nominal voltages of 5000 V and less. 1.2 This Standard does not cover shielded constructions.

Thermoset Insulated Wires and Cables

CSA C22.2 No.38-1977 热固性 绝缘电线和电缆

Thermosetting - Insulating Wires and Cables

ARMY MIL-M-60903 A-1986 电线和电缆的标识

This specification covers the process for marking of identification and designations on electrical wires and cables. Marking is normally accomplished by direct hot stamping on the outer insulation or jacket. Alternate methods involving the use of hot-stamped or ink-stamped identification tapes and sleeves are used in special applications. The hot-stamped markings are inked to provide visual contrast and are impressed for permanency.

MARKING OF ELECTRICAL WIRES AND CABLES

IPC TM-650 2.4.31-1986 灵活扁平电缆的折叠的 修订版A 1986年4月

The reported results are based on the work done by the Copper Foil Rupture Round Robin Task Group, chaired by Louis Zakraysek, EMK Testing Company Inc., under the auspices of the Metallic Foil Subcommittee of the Base Materials Corrimittee of the Institute for Interconnecting and Packaging Electronic Circuits (IPC).

Folding, Flexible Flat Cable; Revision A - April 1986

IPC TM-650 2.4.32-1986 柔性扁平电缆双倍温度测试,修订版A 1986年4月

IPC Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of IPC from manufacturing or selling products not conforming to such Standards and Publication, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than IPC members, whether the standard is to be used either domestically or internationally.

Fold Temperature Testing, Flexible Flat Cable; Revision A - April 1986

IPC TM-650 2.5.15-1986 扁平电缆,射频干扰-电磁屏蔽指导方针和试验方法 修订版A 1986年10月

This document describes materials that can be used for the fabrication of embedded passive capacitor devices within the finished printed circuit board substrate. For this document, embedded passive devices and the phrase embedded passives are considered to be equivalent. It provides information on general designations and associated characteristics of embedded passive device (EPD) capacitor materials. The document shall be used as a qualification and conformance standard for these materials.

Guidelines and Test Methods for RFI-EMI Shielding of Flat Cable; Revision A - October 1986

ARMY MIL-C-63550 E-1985 电气电缆组件制造规格

This specification is approved for use by the U.S. Army Armament, Munitions and Chemical Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense.

CABLE ASSEMBLIES, ELECTRICAL, FABRICATION SPECIFICATION FOR

IPC TM-650 2.5.25-1985 耐压灵活单位电缆 修订版A 1985年11月

This specification establishes the specific requirements for organic high-density interconnect (HDI) layers with microvia technology and the quality and reliability assurance requirements that must be met for their acquisition.

Dielectric Withstand Voltage Flexible Flat Cable; Revision A - November 1985

NAVY MIL-T-85587-1984 TTK-402/E24T-148振动和CNK-357/E24T-148电缆盒试验装置

This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

TEST SET, VIBRATION TTK-402/E24T-148 AND CABLE CASE CNK-357/E24T-148

IPC TM-650 2.5.21-1984 平面电缆数码不平衡相声 修订版A 1984年3月

This specification covers qualification and performance requirements of flexible printed wiring. The flexible printed wiring may be single-sided, double-sided, multilayer, or rigid-flex multilayer. All of these constructions may or may not include stiffeners, plated-through holes, and blind/ buried vias.

Digital Unbalanced Crosstalk, Flat Cable; Revision A - March 1984

IPC TM-650 2.5.19.1-1984 采用双迹示波器的扁平电缆传播延迟 修订版A 1984年7月

Questa specifica riguarda la qualificazione ed i requisiti dei circuiti stampati rigidi. I circuiti stampati possono essere monofaccia, doppiafaccia con o senza fori metallizzati. I circuiti stampati possono essere multistrato con fori metallizzati (pth) con o senza fori di via interrati/ciechi. I circuiti stampati possono essere multistrato formati da strati interni HDI conformemente a IPC-6016. I circuiti stampati possono includere circuiti elettrici attivi costituiti da elementi passivi embedded distribuiti su piani capacitivi con componenti capacitivi o resistivi. I circuiti stampati possono contenere anime metalliche oppure delle armature esterne con funzioni dissipative del calore, che possono essere attivi o passivi. Le variazioni apportate a questa revisione sono spiegate al punto 1.6.

Propagation Delay of Flat Cables Using Dual Trace Oscilloscope; Revision A - July 1984

IPC TM-650 2.5.19-1984 用时域反射计的扁平电缆传播延迟 修订版A 1984年7月

This specification covers qualification and performance of rigid printed boards. The printed board may be single-sided, double-sided, with or without plated-through holes. The printed board may be multilayer with plated-through holes and with or without buried/blind vias. The printed board may be multilayer containing build up HDI layers conforming to IPC-6016. The printed board may contain active embedded passive circuitry with distributive capacitive planes, capacitive or resistive components. The printed board may contain a metal core or external metal heat frame, which may be active or nonactive. Revision level changes are described in 1.6.

Propagation Delay of Flat Cables Using Time Domain Reflectometer; Revision A - July 1984

IPC TM-650 2.5.18-1984 单位电缆(不平衡)特性阻抗 修订版A 1984年7月

This standard establishes requirements and other considerations

Characteristic Impedance Flat Cables (Unbalanced); Revision B - July 1984

CSA C22.2 No.75-M1983-1983(R1999) 热塑性绝缘电线和电缆

1. Scope 1.1 This Standard applies to single conductor thermoplastic insulated wires and cables of the sizes specified in Clause 4.1.4 that are intended for installation in accordance with the Rules of the Canadian Electrical Code, Part I, on systems having nominal voltages of 600 V and less.

Thermoplastic-Insulated Wires and Cables

DLA MIL-STD-685 NOTICE 1-1983 电传打字机,电报,电话信号传输用电缆的识别

THE FOLLOWING PAGES HAVE BEEN REVISED AND SUPERSEDE THE PAGES LISTED:

IDENTIFICATION OF CABLE USED FOR TRANSMISSION OF TELEPHONE, TELEGRAPH, AND TELETYPE SIGNALS

NAVY MIL-C-85485 A-1983 波频吸收过滤线路电缆

This specification covers the requirements for radio frequency absorptive component wires and finished cables which function electrically as distributed low-pass filters.

CABLE, ELECTRIC, FILTER LINE RADIO FREQUENCY ABSORPTIVE

NAVY MIL-C-85485 A SUPP 1-1983 波频吸收过滤电缆

This supplement forms a part of Military Specification MIL-C-85485A dated 10 May 1983

CABLE, ELECTRIC, FILTER LINE RADIO FREQUENCY ABSORPTIVE

ARMY MIL-C-50919 B-1983 M1型电缆起爆弹

Tois specification covers quality assurance provisions and preparation for delivery for Cli2, Cord, Detonating:

CLIP, CORD, DETONATING: M1

NAVY MIL-T-85563-1982 温度限制放大器(TLA) - TTK-383/E24M-30纵倾和CNK-320/E24M-30电缆盒试验装置

This specification establishes the requirements for the manufacture and'acceptance of the Temperature Limiter Amplifier-Trim Test Set TTK- 383/E24M-30 and the Cab1 e Case CNK-320/E24M-30.

TEMPERATURE LIMITER AMPLIFIER (TLA) - TRIM TEST SET TTK-383/E24M-30 AND CABLE CASE CNK-320/E24M-30

NAVY MIL-STD-1322-49-1982 集装只限于海运运载电缆组件ASROC-MK 10 MOD O,MK 21 MOD 0,AND MK 29 MOD 0于集装箱DWG. 1806337

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES.

UNIT LOAD FOR DOMESTIC SHIPMENT ONLY CABLE ASSEMBLIES, ASROC-MK 10 MOD O, MK 21 MOD 0, AND MK 29 MOD 0 IN CONTAINER DWG. 1806337