31.040.10 固定电阻器 标准查询与下载

GB/T 7016-1986 固定电阻器电流噪声测量方法

本标准的目的是使测量固定电阻器电流噪声的测量方法和相关的测试条件标准化，以便能够比较测量结果。本标准对电流噪声的合格极限值未做规定。 本标准规定了推荐用来确定任一给定型号固定电阻器的“噪声”即电流噪声大小的测量系统和测量程序。

Method of measurement of current noise generated in fixed resistors

GB/T 5732-1985 电子设备用固定电阻器 第4部分:分规范:功率型固定电阻器(可供认证用)

本规范适用于额定功耗大于1W至1000W（包括1000W）的、装有外壳的或外部涂有防护层的功率型固定电阻器。

Fixed resistors for use in electronic equipment--Part4: Sectional specification: Fixed power resistors

GB/T 5731-1985 电子设备用固定电阻器 第2部分:空白详细规范:低功率非线绕固定电阻器 评定水平E(可供认证用)

空白详细规范是分规范的一种补充性文件，并包括详细规范的格式、编排和最少内容的要求。不遵守这些要求的详细规范，则不能认为是符合IEC电子元器件质量评定体系要求的标准。

Fixed resistors for use in electronic equipment--Part2: Blank detail specification: Fixed low-power non-wire-wound resistors--Assessment level E

GB/T 5733-1985 电子设备用固定电阻器 第4部分:空白详细规范:功率型固定电阻器 评定水平E(可供认证用)

空白详细规范是分规范的一种补充性文件，并包括详细规范的格式、编排和最少内容的要求。不遵守这些要求的详细规范，则不能认为是符合IEC电子元器件质量评定体系要求的标准。

Fixed resistors for use in electronic equipment--Part4: Blank detail specification: Fixed power resistors--Assessment level E

GB/T 5730-1985 电子设备用固定电阻器 第2部分:分规范:低功率非线绕固定电阻器(可供认证用)

本规范适用于电子设备用额定功耗小于或等于4W的低功率非线绕固定电阻器。

Fixed resistors for use in electronic equipment--Part2: Sectional specification: Fixed low-power non-wire-wound resistors

GB/T 5735-1985 电子设备用固定电阻器 第5部分:空白详细规范:精密固定电阻器 评定水平E(可供认证用)

空白详细规范是分规范的一种补充性文件，并包括详细规范的格式、编排和最少内容的要求。不遵守这些要求的详细规范，则不能认为是符合IEC电子元器件质量评定体系要求的标准。

Fixed resistors for use in electronic equipment--Part5: Blank detail specification: Fixed precision resistors--Assessment level E

GB/T 5734-1985 电子设备用固定电阻器 第5部分:分规范:精密固定电阻器(可供认证用)

本规范适用于电子设备用精密固定电阻器。

Fixed resistors for use in electronic equipment--Part5: Sectional specification: Fixed precision resistors

BS EN IEC 60115-1:2023 用于电子设备的固定电阻器 通用规格

1   Scope This part of EN 60115 is a generic specification and is applicable to fixed resistors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Fixed resistors for use in electronic equipment. Generic specification

23/30411007 DC BS EN IEC 60115-4-10 电子设备中使用的固定电阻器 第 4-10 部分 空白详细规范 具有轴向引线的功率电阻器 用于电路板 (THT) 上的通孔组装 适用于通用电子设备 分类…

BS EN IEC 60115-4-10. Fixed resistors for use in electronic equipment - Part 4-10. Blank detail specification. Power resistors with axial leads for through-hole assembly on circuit boards (THT), for general electronic equipment. Classification…

BS IEC 60115-2-10:2023 用于电子设备的固定电阻器 空白详细规范：带引线的低功率薄膜电阻器 用于电路板通孔组装（THT） 用于通用电子设备 分类级别 G

1   Scope COMMENT The text of this clause may repeat information already given in some fields of the above title block. Essential information on the special type of components covered by the drafted detail specification may be added, preferably at the place marked with "…". This detail specification specifies the characteristics and ratings of low-power film resistors with leads for use in electronic equipment, which are typically assembled in through-hole technology (THT) on circuit boards. ... The resistors covered herein are classified to level G, as defined in IEC 60115‑1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115‑2‑10:2023. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures specified by IEC 60115‑1:2020, Annex Q.

Fixed resistors for use in electronic equipment. Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G

IEC 60115-2-10:2023 电子设备用固定电阻器.第2-10部分:空白详细规范:一般电子设备用电路板通孔组件（THT）用带引线的低功率薄膜电阻器 G级

Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic e

IEC 60115-2:2023 电子设备用固定电阻器.第2部分:分规范:电路板通孔组件用带引线的低功率薄膜电阻器（THT）

Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT)

BS IEC 60115-4:2022 电子设备用固定电阻器 分规范：用于电路板通孔装配（THT）或装配在底盘上的功率电阻器

1   Scope This part of IEC 60115 relates to resistors having a rated dissipation typically greater than 1 W up to and including 1 000 W for use in electronic equipment. This document is applicable to fixed power resistors with a maximum surface temperature (MET) higher than the preferred upper category temperature (UCT) of 200 °C. NOTE Heat sink resistors, i.e. resistors which in their operation depend on being mounted on a dedicated heat sink, owing to their special temperature conditions, are covered by a special sectional specification (under consideration at the time of publication). These resistors are typically described according to types (different geometric shapes) and styles (different dimensions), and product technology. The resistive element of these resistors is typically — protected by a conformal lacquer coating, or — cement coating, or — vitreous enamel, or — a ceramic body, or — any other housing, which is to be described in the relevant specification. The electrical connection of these resistors is typically achieved by means of

Fixed resistors for use in electronic equipment - Sectional specification: Power resistors for through hole assembly on circuit boards (THT) or for assembly on chassis

IEC 60115-4:2022 电子设备用固定电阻器.第4部分:分规范:电路板通孔组件（THT）或底盘组件用功率电阻器

Fixed resistors for use in electronic equipment - Part 4: Sectional specification: Power resistors for through hole assembly on circuit boards (THT) or for assembly on chassis

KS C IEC 60115-2-2021 电子设备用固定电阻器第2部分:分规范:有引线的低功率薄膜固定电阻器

Fixed resistors for use in electronic equipment — Part 2: Sectional specification: Leaded fixed low power film resistors

KS C IEC 60115-2:2021 电子设备用固定电阻器第2部分:分规范:有引线的低功率薄膜固定电阻器

Fixed resistors for use in electronic equipment — Part 2: Sectional specification: Leaded fixed low power film resistors

21/30450001 DC BS EN IEC 60115-8 电子设备用固定电阻器 第 8 部分：分规范 固定表面贴装电阻器

BS EN IEC 60115-8. Fixed resistors for use in electronic equipment - Part 8. Sectional specification. Fixed surface mount resistors

KS C 5115-6-2021 电子设备用固定电阻器 第6部分：分规范：可单独测量的电阻器内的固定电阻网络

Fixed resistors for use in electronic equipment－Part 6：Sectional specification：Fixed resistor networks withindividually measurable resistors

KS C IEC 60115-9-2021 电子设备用固定电阻器 第9部分：分规范 具有可单独测量电阻器的固定表面贴装电阻网络

Fixed resistors for use in electronic equipment－Part 9：Sectional specification－Fixed surface mount resistor networks with individually measurable resistors

KS C 5115-4-2021 电子设备用固定电阻器 第4部分：分规范：固定功率电阻器

Fixed resistors for use in electronic equipment－Part 4：Sectional specification：Fixed power resistors