45.040 铁路工程材料和零件 标准查询与下载

ASTM A729/A729M-17 公共运输和电气铁路运输用热处理碳素合金钢轴的标准规格

1.1 This specification covers heat-treated carbon and alloy steel axles for mass transit and commuter cars in electric and locomotive hauled railway service. 1.2 This specification is for solid design roller bearing axles with machined bodies. 1.3 Various axle designs are used for this service including motor and non-motor with either inboard or outboard journals. 1.4 Supplementary requirements including those in the general requirements of Specification A788/A788M are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.5 Unless the order specifies the applicable “M” specification designation, the axles shall be furnished to the inch-pound units. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

NF F11-415:2016 铁路机车车辆 带铸铁环的制动盘

Railway rolling stock - Brake discs with cast iron ring

EN 16241:2014+A1:2016 铁路应用.松紧调整器 包含修改件A1,2016

This European Standard establishes general principles for designing, manufacturing and type testing slack adjusters. NOTE 1 These requirements cannot be written in sufficient detail to ensure good workmanship or proper construction. Each manufacturer is therefore responsible for taking every necessary step to make sure that the quality of workmanship and construction is such as to ensure accordance with good engineering practice. It is applicable to double acting slack adjusters designed to control the block (shoe) to tread (wheel) clearance of tread braked vehicles with conventional brake cylinders and rigging, without taking the track-gauge into consideration. NOTE 2 The term used for this device by UIC is "Brake rigging adjuster".

Railway applications - Slack adjuster

DIN EN 15313:2016 轨道交通.在工作的轮辐的操作要求.在工作和车辆卸下轮辐的维修.德文版本EN 15313-2016

Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance; German version EN 15313:2016

TB/T 3449-2016 铁路边坡柔性被动防护产品落石冲击试验方法与评价

Rockfall impact test method and evaluation of flexible passive protection products for railway slopes

TB/T 2349-2016 铁路钢桥连接疲劳试验方法

Fatigue test method for railway steel bridge connections

EN 15313:2016 铁路设备-使用中轮副的操作要求-使用中和离开车辆维护

To ensure safety and interoperability, this Standard gives: the limits for in-service and off-vehicle wheelsets; the operations to be carried out for which the specific values (and/or criteria) remain to be defined in the maintenance plan. This European Standard applies to wheelsets and axle boxes complying with the following European Standards: EN 13103, EN 13104; EN 13260, EN 13261, EN 13262; EN 13979-1; EN 13715; EN 13749. that comprise: the axle fitted with wheels of diameters greater than or equal to 330 mm; axle boxes with bearings and grease. This European Standard is also applicable to wheelsets: fitted with brake discs, final drive, transmission or noise-damping systems, as appropriate; not complying with the above European Standards, but complying with the international requirements in force, for example in UIC leaflets, before the approval of these standards; with tyred wheels; with resilient wheels. For equipment not covered by Directive 2008/57/EC, this European Standard may be applied, noting that different values may be used. All dimensions in this Standard are in millimetres (mm). It is necessary to describe in a specific document the tasks to be performed in order to maintain wheelsets within the limits defined therein. NOTE The specific values and criteria are defined in an appropriate maintenance plan.

Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance

TB/T 3193-2016 铁路工程预应力筋用夹片式 锚具、夹具和连接器

本标准规定了夹片式锚具（含夹片式低回缩锚具）、夹具和连接器术语和定义、产品的代号与标记、技术要求、检验方法、检验规则和标志、包装、运输、贮存。 本标准适用于铁路工程预应力混凝土结构中使用的锚固直径为15.20 mm钢绞线的夹片式锚具、夹具和连接器。

Anchorage, grip and coupler for prestressing tendons in railway construction

TB/T 3440-2016 铁路通信漏泄同轴电缆吊具

本标准规定了铁路通信漏泄同轴电缆吊具（以下简称“吊具”）的产品分类、吊具型号、技术要求、检验方法、检验规则、包装、标志、运输及储存。 本标准适用于铁路通信漏泄同轴电缆吊具的设计、制造和检验。

Clamp for railway communication leaky coaxial cable

TB/T 3435-2016 铁路混凝土桥梁梁端防水装置

本标准规定了铁路混凝土桥梁梁端防水装置的术语和定义，规格、分类、型号编制规则及结构形式，技术要求，检验方法，检验规则，标志、包装、储存和运输。 本标准适用于由异型型材和防水橡胶带等部件组成的、伸缩量为30 mm~200 mm的高速铁路混凝土桥梁梁端防水装置，其他铁路混凝土桥梁梁端防水装置可参照使用。

Waterproof device for railway concrete bridge joint

TB/T 3432-2016 高速铁路预制后张法预应力混凝土简支梁

本标准规定了新建高速铁路预制后张法预应力混凝土简支梁的技术要求、检验方法、检验规则、标志与制造技术证明书、保管及运输、架设。 本标准适用于新建高速铁路预制后张法预应力混凝土简支梁（以下简称预制梁）。

Precast post-tensioned prestressed concrete simple-supported beam of high-speed railway

TB/T 3433-2016 高速铁路预制先张法预应力混凝土简支梁

本标准规定了新建高速铁路预制先张法预应力混凝土简支梁的技术要求、检验方法、检验规则、标志与制造技术证明书、保管及运输和架设。 本标准适用于新建高速铁路预制先张法预应力混凝土简支梁（以下简称先张梁）。

Precast pretensioned prestressed concrete simple-supported beam of high-speed railway

GOST R 57214-2016 铁路机车车辆用玻璃制品. 通用规格

Glazing products for railway rolling stock. General specification

GOST 33463.6-2016 铁路机车车辆的生命保障系统. 第6部分. 供水系统的卫生评定方法

Life support systems on railway rolling stock. Part 6. Methods of hygienic assessment of water supply system

TB/T 1027.2-2015 机车车轴 第2部分：车轴

Locomotive Axles Part 2: Axles

TB/T 1027.1-2015 机车车轴 第1部分：钢坯

Locomotive Axle Part 1: Billet

TB/T 3421-2015 铁道货车用铝合金板材及型材

Aluminum alloy plates and profiles for railway trucks

EN 15329:2015 铁路应用.制动.铁路车辆的制动块保持架和制动蹄键

This European Standard applies to brake block holders and brake shoe keys installed on railway vehicles. Brake block holders and brake shoe keys made of non-ferrous materials are not subject to this European Standard. This European Standard contains requirements for design, evaluation testing of conformity and serial production monitoring. The requirements contained in this European Standard apply to the brake block holders and brake shoe keys with which the railway vehicles of main-line railways, private railways (regional railways, company railways) are fitted.

Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles

BS EN 16451:2015 轨道交通. 制动. 制动衬块固定器

Railway applications. Braking. Brake pad holder

EN 16451:2015 铁路应用.制动.制动片支架

The requirements contained in this European Standard apply to the brake pad holders with which the rail vehicles of main-line railways, regional and suburban railways are fitted. Brake pad holders pursuant to this standard are to be made from ferrous materials e. g. cast iron, cast steel or forged steel. Brake pad holders made of non-ferrous materials are not subject of this standard.

Railway applications - Braking - Brake pad holder