45.120 铁路/索道建造和维护设备 标准查询与下载
共找到 167 条与 铁路/索道建造和维护设备 相关的标准，共 12 页
本标准规定了板式无砟轨道门式铺板机(以下简称铺板机)的术语与定义、技术要求、检验方法、检验规则、标志、包装、运输及存放等内容。本标准适用于新制板式无砟轨道铺设用的双梁式、单梁式、框架式及主梁可伸缩式铺板机。其他形式铺板机可以参照执行。
Ballastless track gantry slab-laying machine
- ICS
- 45.120
- CCS
- S19
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本标准规定了板式无砟轨道水泥乳化沥青砂浆车(以下简称砂浆车)的分类、规格及型号编制、技术要求、检验方法、检验规则、标识、包装、运输、贮存。本标准适用于拌制和灌注铁路板式无砟轨道填充层砂浆、于线下行走施工半挂汽车底盘结构和于线上行走施工自制专用底盘结构及轨道底盘结构的砂浆车。其他类型和特殊工况下使用的砂浆车也可参照本标准执行。
Ballastless track cement emulsification bitumen mortar truck
- ICS
- 45.120
- CCS
- S19
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本标准规定了CRTS Ⅱ型轨道板专用数控磨床的术语和定义、产品型号编制方法、技术要求、检验方法、检验规则、标识、包装和贮存。本标准适用于铁路CRTS Ⅱ型轨道板专用数控磨床(以下简称数控磨床)的制造及检验。
Special numerical control grinding machine for the CRTS Ⅱ track slab
- ICS
- 45.120
- CCS
- S19
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本标准规定了CRTS Ⅱ型轨道板专用翻转机的产品型号编制方法、技术要求、检验方法、检验规则、标志、包装和运输。本标准适用于CRTS Ⅱ型轨道板专用翻转机(以下简称翻转机)。
Overturning machine for the CRTS II track slab
- ICS
- 45.120
- CCS
- S19
- 发布
- 2013-02-20
- 实施
- 2013-06-01
本标准规定了CRTS Ⅱ型轨道板专用真空脱模机的术语和定义、产品型号编制方法、要求、检验方法、检验规则以及标志、包装、运输和贮存。本标准适用于CRTS Ⅱ型轨道板专用真空脱模机(以下简称真空脱模机)的制造及检验。
Special vacuum demoulding machine for the CRTS Ⅱ track slab
- ICS
- 45.120
- CCS
- S19
- 发布
- 2013-02-20
- 实施
- 2013-06-01
? ??? ?? ? ???, ??? ??? ?? ?? ?? ?? ???? ?? ???? ?
Hydraulic drifter
- ICS
- 45.120
- CCS
- J84
- 发布
- 2012-12-17
- 实施
- 2012-12-17
Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
- ICS
- 45.120
- CCS
- S09
- 发布
- 2012-08-01
- 实施
1.1 GeneralThis European Standard defines the specific technical railway requirements for working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.This European Standard applies to all railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising adhesion between the rail and rail wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.This European Standard applies to machines that are intende
Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for working
- ICS
- 45.120
- CCS
- 发布
- 2012-02-24
- 实施
- 2012-02-24
Railway applications - Track - Railbound construction and maintenance machines - Part 2 : technical requirements for working.
- ICS
- 45.120
- CCS
- S19
- 发布
- 2012-02-01
- 实施
Guide for Fire Hazard Assessment of Rail Transportation Vehicles
- ICS
- 45.120
- CCS
- S50;C80
- 发布
- 2012
- 实施
1.1 GeneralThis European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising friction adhesion between the rail and rail whee
Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
- ICS
- 45.120
- CCS
- 发布
- 2011-12-09
- 实施
- 2011-12-09
This European Standard specifies the significant hazards, hazardous situations and events, common to self-propelled road-rail machines and attachments as defined in 3.5 and 3.6 of EN 15746-1:2010 and arising due to the adaptation for their use on rail intended for construction, maintenance inspection of the railway infrastructure, shunting and emergency rescue vehicles, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4. This European Standard deals with the common hazards during running, assembly and installation, commissioning, travelling on and off track, use including setting,
Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
- ICS
- 45.120
- CCS
- 发布
- 2011-11-19
- 实施
- 2011-11-19
1.1 GeneralThis European Standard deals with the technical requirements to minimize the specific railway hazards of self propelled road-rail machines - henceforward referred to as machines - and associated equipment, which can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorised representative.Part 1 of EN 15746 defines requirements for approval of the machine by an authorised body; Part 2 defines requirements for the machine to be declared conformant by the manufacturer, except in the case of machines classified under Annex 4 of the Ma
Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
- ICS
- 45.120
- CCS
- 发布
- 2011-11-19
- 实施
- 2011-11-19
本标准规定了电气化铁路接触网立杆作业车的技术要求、检查与试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于标准轨距电气化铁路接触网立杆作业车（以下简称立杆车）。
Mast erection vehicle for overhead contact system in electrification railway
- ICS
- 45.120
- CCS
- S84
- 发布
- 2011-05-20
- 实施
- 2011-11-01
本标准规定了电气化铁路接触网恒张力放线车的基本要求、技术要求、检查与试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于电气化铁路接触网恒张力放线车（以下简称：放线车），城市轨道交通恒张力放线车可参照使用。
Constant tension cable unrolling vehicle for overhead contact system in electrification railway
- ICS
- 45.120
- CCS
- S84
- 发布
- 2011-05-20
- 实施
- 2011-11-01
1.1 GeneralThis European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment.This European Standard applies to all railbound machines and other vehicles - referred to as machines - running exclusively on the railway (utilising adhesion between the rail and wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and contr
Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
- ICS
- 45.120
- CCS
- 发布
- 2011-04-14
- 实施
- 2011-04-14
This document deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys used for work on tracks as listed in clause 4 and annex A which can arise during the commissioning, the operation and the maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the general function of the machines (e.g. cutting, drilling, grinding). This document applies to portable machines and portable trolleys designed for work on the track with nominal track gauges of 1 435 mm and 1 668 mm and clearance gauge as defined in annex B including cutting machines and those designed for working on wooden sleepers. This document does not apply to portable trolleys coupled together, whether or not self propelled, and trolleys used for transporting personnel. For portable machines and trolleys used on railway lines with a different clearance gauge to that defined in annex B specific requirements concerning the clearance gauge may apply1). This document does not apply to the following: requirements for quality of the work or performance of the machine; regulations defined by each infrastructure controller for portable machine and trolley operation which shall be the subject of negotiation between the user and the manufacturer; portable machines used from railway vehicles. This document does not establish the additional requirements for the following: operation in severe conditions (e.g. extreme environmental conditions such as: freezing applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields); operation subject to special rules as potentially explosive atmospheres; electromagnetic compatibility, due to e.g. electronic components; hazards occurring during decommissioning and/or recycling; hazards due to vibration; hazards due to wind speed greater than 35 m/s; hazards due to natural causes e.g. earthquake, lightning, flooding etc. noise.
Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
- ICS
- 45.120
- CCS
- 发布
- 2011-04-12
- 实施
1.1 GeneralThis European Standard deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys intended for work on tracks as listed in Clause 4 which can arise during the commissioning, operation and maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the performance of the machines, e.g. cutting, drilling, grinding.This European Standard applies to portable machines and trolleys with rail wheels or rollers designed for work whilst on the track with nominal track gauges of 1 435 mm and 1 668 mm and cle
Railway applications – Track – Safety requirements for portable machines and trolleys for construction and maintenance
- ICS
- 45.120
- CCS
- 发布
- 2011-03-18
- 实施
- 2011-03-18
