45.120 铁路/索道建造和维护设备 标准查询与下载

TB/T 2658.21-2007 公务作业 第21部分:钢轨焊缝超声波探伤作业

TB/T 2658的本部分规定了钢轨焊缝超声波探伤的工艺要求、探伤操作、缺陷处理、探伤报告等。 本部分适用于新焊钢轨焊缝（以下简称新焊焊缝）和在役钢轨焊缝（以下简称在役焊缝）的超声波探伤作业。

Maintenance performance Part 21: Ultrasonic testing of rail welds

DS/EN 13848-2:2006 铁路应用 轨道 轨道几何质量 第2部分：测量系统 轨道记录车辆

This European Standard specifies the minimum requirements for measuring principles and systems in order to produce comparable results. It applies to all measuring equipment fitted on dedicated recording vehicles, or on vehicles specifically modified for the same purpose, after the coming into force of the standard. It also defines the requirements of measurement.

Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles

TB/T 2187-2006 起重轨道车通用技术条件

本标准规定了在铁路线路上运行的起重轨道车的技术参数和型号与系列、要求、试验方法、检验规则、标志、包装、运输、贮存和质量保证。 本标准适用于以柴油机为动力、额定起重量为5t～50t的标准轨距新造起重轨道车的设计、制造和检验，非标准轨距的起重轨道车亦可参照本标准有关条款执行。

General technical specification for railway crane

TB/T 2180-2006 电气化铁道接触网综合检修作业车技术条件

本标准规定了电气化铁道接触网综合检修作业车的基本形式和主要技术参数、要求、检查与试验方法、检验规则、标志、包装、运输、贮存、等方面的内容。 本标准适用于新造标准轨距以内燃机为动力的电气化铁道接触网综合检修作业车（以下简称作业车）的设计、制造和检验，非标准轨距、无动力的作业车可参照使用。

Technical specification for electrified catenary inspection & Maintenance railway working car

TB/T 1854-2006 铁路线路机械产品型号编制方法

本标准规定了铁路线路机械产品型号的编制原则、型号组成、型号示例及主要线路机械产品的型号等。 本标准适用于铁路线路机械产品型号的编制。

Draw up method for rail permanent way machinery

NF F58-002:2005 轨道交通.轨道.建造和维修用便携式机械和手摇车的安全要求

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance.

NF F58-012:2005 轨道交通.轨道.建造和维修用便携式机械和手推车的安全要求

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance.

BS EN 13977:2005 轨道交通.轨道.建造和维修用便携式机械和手摇车的安全要求

1 General This document deals with the technical requirements to minimise the railway specific significant hazards of portable machines and trolleys used for work on tracks as listed in clause 4 and annex A which can arise during the commissioning, the operation and the maintenance of portable machines and trolleys when used as intended and under the conditions foreseen by the manufacturer. It does not deal with the general function of the machines (e.g. cutting, drilling, grinding). This document applies to portable machines and portable trolleys designed for work on the track with nominal track gauges of 1 435 mm and 1 668 mm and clearance gauge as defined in annex B including cutting machines and those designed for working on wooden sleepers. This document does not apply to portable trolleys coupled together, whether or not self propelled, and trolleys used for transporting personnel. For portable machines and trolleys used on railway lines with a different clearance gauge to that defined in annex B specific requirements concerning the clearance gauge may apply. This document does not apply to the following: — requirements for quality of the work or performance of the machine; — regulations defined by each infrastructure controller for portable machine and trolley operation which shall be the subject of negotiation between the user and the manufacturer; — portable machines used from railway vehicles. This document does not establish the additional requirements for the following: — operation in severe conditions (e.g. extreme environmental conditions such as: freezing applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields); — operation subject to special rules as potentially explosive atmospheres; — electromagnetic compatibility, due to e.g. electronic components; — hazards occurring during decommissioning and/or recycling; — hazards due to vibration; — hazards due to wind speed greater than 35 m/s; — hazards due to natural causes e.g. earthquake, lightning, flooding etc. — noise. NOTE Noise of machines which are dealt with by this document is regarded as a significant hazard. Noiseis not covered by this document but will be dealt with in an Amendment to the first edition of this standard. This Amendment will give: — clauses dealing with noise emission according to EN 1746. — a noise test code using as a basis for preparation the designation of noise-emission according to the requirements of the Machinery-Directive 98/37/EC, annex I, clause 1.7.4f. 2 Validity of this document This document applies to portable machines and trolleys that are ordered after the date of publication of this standard. note:1) E.g. the specific rules of the infrastructure manager.

Railway applications — Track — Safety requirements for portable machines and trolleys for construction and maintenance

TB/T 2771-2005 切轨机通用技术条件

本标准规定了切轨机的术语和定义、基本参数、要求、试验方法、检验规则及标志、包装和储存等。 本标准适用于内燃、电动切轨机。其他动力的切轨机参照执行。

General technical specification for rail cutting machine

TB/T 1855-2005 小型道碴清筛机通用技术条件

本标准规定了小型道碴清筛机的基本参数、使用范围、要求、试验方法、检验规则，以及标志、包装和运输等。 本标准适用于小型枕底道碴清筛机(包括区间和站内作业用的清筛机)及小型边坡清筛机(以下统称“清筛机”)。

General technical specification for little ballast cleaning machine

TB/T 2899-2005 液压起道、拔道、起拔道机通用技术条件

本标准规定了液压起道、拔道、起拔道机的术语和定义、基本型式和主要参数、要求、试验方法、检验规则、标志和包装等。 本标准适用于在标准轨距铁路线路上作业的液压起道、拔道、起拔道机。

General technical conditions of hydraulic track lifting, lining, lifting and lining machine

TB/T 2658.20-2004 工务作业标准 大型养路机械道床换碴作业

本部分规定了大型养路机械(以下简称“大机”)道床换碴的作业条件、作业组织、作业程序及要求和施工安全等方面的内容。 本部分适用于采用大机进行的道床换碴作业，包括处理翻浆冒泥道床。大型清筛机附挂风动卸碴车进行道床清筛作业可参照执行。 本部分适用于路段设计行车速度为160km/h及以下的线路。

Work and operation standard for railway maintenance construction.Ballast replacing construction with heavy-duty track maintenance manchinery

TB/T 1910-2004 铁路线路机械术语

本标准规定了主要线路机械的术语和定义。 本标准适用于科研、教学、设计、制造、使用和管理。

Terms for rail permanent way machinery

TB/T 2101-2004 铁路施工机械术语

本标准规定了铁路建设中主要施工机械的术语及其定义。 本标准适用于铁路施工机械的标准、技术文件及科技出版物等。

Terminology for railway construction machinery

TB/T 2139-2004 轻型轨道车技术条件

本标准规定了铁道线路上运行的轻型轨道车(含拖车)的基本形式和技术参数、要求、试验方法、检验规则、标志、包装、运输、贮存和质量保证等。 本标准适用于新造标准轨距的轻型轨道车(以下简称轻型车)的设计、制造和检验，非标准轨距的轻型车亦可参照本标准有关条款执行。

Technical requirements of light duty railway trolley

TB/T 1926-2004 钢轨打磨机通用技术条件

本标准规定了钢轨打磨机的基本参数、要求、试验方法、检验规则及标志、包装和贮存。 本标准适用于钢轨轨头轮廓仿形打磨的各型内燃、电动钢轨打磨机(以下简称“打磨机”)的制造与验收。

General technical specification of rail grinding machine

NF F58-006:1994 铁路建造和维护设备.高速线路更新工作的线路更新顺序.规范

Railway track construction and maintenance plant. Track renewal train for high speed track renewal work. Specifications.

NF F58-501:1993 铁路建造和维护设备.钢轨的水准测量和敷设施工.重型机械压型、修整和重新装料

Railway track construction and maintenance plant. Levelling and layout maintenance of tracks. Tamping, trimming and re-stocking heavy mechanical.

NF F58-502:1993 铁路建造和维护设备.尖轨与辙叉的水准测量和布局维护.捣固和修整重型机械

Railway track construction and maintenance plant. Levelling and layout maintenance of points and crossing. Tamping and trimming heavy mechanical.

NF F58-010:1992 铁路建造和维护设备.道碴稳定器.规范

Raiway track construction and maintenance plant. Ballast regulator. Specifications.