49.040 有关航空航天制造用镀涂和有关工艺 标准查询与下载

KS W 2932-2013 飞机液压部件 标明部件批准使用的流体的标记

AIRCRAFT-HYDRAULIC COMPONENTS - MARKING TO INDICATE FLUID FOR WHICH COMPONENTS IS APPROVED

SAE AMS2404G-2013 无电镀镍镀层

This specification covers the requirements for electroless nickel deposited on various materials. This deposit has been used typically to provide a uniform build-up on intricate shapes, to improve wear and/or corrosion resistance, or to improve solderability on or for selected materials, but usage is not limited to such applications. The deposit has been used in service up to 1000 °F (540 °C) although wear and/or corrosion resistance may degrade as service temperature increases.

Plating, Electroless Nickel

KS W 0627-2013 航空航天器零部件的互换性和替换性

Interchangeability and replaceability of component partsfor aerospace vehicles

SAE AMS1534C-2013 航空器玻璃窗清洁剂

This specification covers two types of cleaner in the form of a ready-to-use liquid. Primarily for removing soils, contaminants, and residues from aircraft glass windows by manual application. The cleaners covered by this specification shall be of the following types as ordered: Type I - Regular; and Type II - Antifogging.

Cleaner, Aircraft Glass Window

SAE AMS-C-26074D-2013 化学镀镍涂层

This specification covers the requirements for electroless (autocatalytic chemical reduction) deposition of nickel-phosphorous alloy coatings on metal and composite surfaces.

Electroless Nickel Coatings

SAE AMS2405E-2013 低磷化学镀镍

This specification covers the engineering requirements for electroless deposition of low-phosphorus nickel on various materials and the properties of the deposit.

Electroless Nickel Plating, Low Phosphorus

SAE AMS2417J-2013 锌镍合金镀层

This specification covers the requirements for electrodeposition of a zinc-nickel alloy and the properties of the deposit.

Plating, Zinc-Nickel Alloy

SAE AMS2408K-2013 镀锡

This specification covers the requirements for electrodeposition of tin on metals and the properties of the deposit. This process has been used typically to prevent galling or seizing of metal surfaces, to provide a surface for soft soldering, or to improve corrosion resistance, but usage is not limited to such applications (See 8.6).

Plating, Tin

SAE AMS2426E-2013 真空沉积镉镀层

This specification covers the engineering requirements for vacuum deposition of cadmium and the properties of the deposit.

Coating, Cadmium Vacuum Deposition

SAE AMS2530A-2013 较少粘合剂影响应用薄润滑油膜的二硫化钨涂层

This specification covers a coating consisting of tungsten disulfide without binders and not requiring a curing process.

Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less, Impingement Applied

SAE AMS2413F-2013 镀银-铑

This specification covers the requirements for electrodeposited silver and rhodium deposits. This electrodeposit has been used typically to provide a conductive surface for electrical contacts or a reflective coating for waveguide surfaces for parts operating up to 300 °F (149 °C), but usage is not limited to such applications.

Plating, Silver-Rhodium

SAE AMS2473H-2013 铝合金用化学薄膜处理.一般用途涂层

This specification establishes the engineering requirements for producing chemical-film coatings on aluminum alloys and the properties of such coatings.

Chemical Film Treatment for Aluminum Alloys, General Purpose Coating

SAE AIR6232-2013 与飞机除冰/防冻液相互作用的飞机表面涂层

This SAE Aerospace Information Report (AIR) provides descriptions of test methods for determining if an aircraft surface coating of any thickness has adverse effects on aircraft deicing/anti-icing fluids with respect to fluid holdover time performance and aerodynamic performance. Although not the primary mandate of the G-12 Aircraft Ground Deicing Committee, this document also provides descriptions of suggested test methods for evaluating aircraft surface coatings with respect to durability, hardness, weathering, aerodynamic drag, ice adhesion, ice accumulation, contact angle, and thermal conductivity. These additional tests can provide informational data f

Aircraft Surface Coating Interaction with Aircraft Deicing/Anti-Icing Fluids

SAE AMS2585A-2013 超声波激活喷丸加工介质

This specification was issued to cover peening balls suitable for an enhanced peening technique. The complete requirements for procuring the product shall consist of this document and the latest Issue of the basic specification, AMS2431. Peening balls conforming to this specification are typically intended for use in ultrasonically activated shot peening of metal surfaces to impart compressive stresses to these surfaces thereby increasing resistance to fatigue and stress corrosion cracking. These balls can also be used in the peen forming process.

Shot Peening Media, Ultrasonically Activated

SAE AMS3110K-2013 铬酸锌处理剂

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared ""CANCELLED"" by the Aerospace Materials Division, SAE, as of June 2009. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications indicating that it has been ""CANCELLED"". This specification covers a zinc chromate primer in the form of a liquid. This product has been used typically as a protective coating on metals and

Primer, Zinc Chromate

SAE AMS3122G-2013 黑底苯酚瓷漆

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared ""CANCELLED"" by the Aerospace Materials Division, SAE, as of June 2009. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications indicating that it has been ""CANCELLED"". This specification covers a semigloss black baking enamel based on a phenolic resin. Primarily as a coating for metal surfaces exposed to corrosive c

Enamel, Phenolic, Black Baking

SAE AMS3130H-2013 邻苯二甲酸甘油酯漆料

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared ""CANCELLED"" by the Aerospace Materials Division, SAE, as of June 2009. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications indicating that it has been ""CANCELLED"".

Paint Vehicle, Glyceryl Phthalate

SAE AMS3135G-2013 硅树脂250℃(482℉)加工处理涂料

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared ""CANCELLED"" by the Aerospace Materials Division, SAE, as of June 2009. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications indicating that it has been ""CANCELLED"". This specification covers an unpigmented silicone-resin-base coating material. Primarily for use on chemically or electrochemically treated magnesium

Coating Material, Silicone Resin 250°C (482°F) Cure

SAE AMS3140B-2013 聚四氟乙烯填充的脂肪族异氰酸盐尿烷涂层

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared ""NONCURRENT"" by the Aerospace Materials Division, SAE, as of October, 2007. It is recommended, therefore, that this specification not be specified fro new designs. ""NONCURRENT"" refers to those specifications which have previously been widely used and which may be required for production or processing of existing designs in the future. The Aerospace Materials Division, however, does

Coating, Urethane, Aliphatic Isocyanate, Polytetrafluoroethylene Filled

SAE AMS3126D-2013 无机粘胶剂热固防腐和防热铝涂层材料

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a corrosion and heat resistant aluminum coating material supplied as a liquid of suitable consistency for coating parts after being thoroughly mixed. Primarily for coating ferrous parts to be exposed to temperatures below 650°C (1200°F).

Aluminum Coating Material, Corrosion and Heat Resistant, Thermosetting, Inorganic Binder