55.080 麻袋、袋子 标准查询与下载

KS T ISO 7965-2:2020 袋 - 跌落测试 - 第2部分:由热塑性弹性薄膜制成的袋子

Sacks — Drop test — Part 2: Sacks made from thermoplastic flexible film

KS T ISO 7023:2020 包装 - 袋 - 采样空袋测试方法

Packaging — Sacks — Method of sampling empty sacks for testing

T/XSPCSH 0001-2019 礼品袋

礼品袋的开发设计，材料品质，到技术工艺的标准化，质量检验的规范化，以及售后范围的细致化。

Gift Bag

T/ZZB 1365-2019 自立式自封袋

本标准规定了自立式自封袋的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本标准适用于不依托其他物体支撑情况下能保持站立，且开口处采用凸棱和凹槽结构，可反复封口、拉开的软包装袋。

Standing grip bag

T/CPF 0007-2018 易回收塑料编织袋

本标准规定了易回收塑料编织袋的术语和定义、分类、型号和规格、要求、试验方法、检验规则和贮存。

Easy to recycle plastic woven bag

IEC 61340-4-4:2018 静电 - 第4-4部分:特定应用的标准测试方法 - 柔性中间散装容器的静电分类（纤维）

This part of IEC 61340 specifies requirements for flexible intermediate bulk containers (FIBC) between 0@25 m3 and 3 m3 in volume@ intended for use in hazardous explosive atmospheres. The explosive atmosphere can be created by the contents in the FIBC or can exist outside the FIBC. The requirements include: classification and labelling of FIBC classification of inner liners specification of test methods for each type of FIBC@ inner liner@ labels and document pockets design and performance requirements for FIBC@ inner liners@ labels and document pockets safe use of FIBC (including those with inner liners) within different zones defined for explosion endangered environments@ described for areas where combustible dusts are@ or can be@ present (IEC 60079-10-2)@ and for explosive gas atmospheres (IEC 60079-10-1) procedures for type qualification and certification of FIBC@ including the safe use of inner liners. NOTE 1 Guidance on test methods that can be used for manufacturing quality control is given in Annex C. The requirements of this document are applicable to all types of FIBC and inner liners@ tested as manufactured@ prior to use and intended for use in hazardous explosive atmospheres: Zones 1 and 2 (Groups IIA and IIB only) and Zones 21 and 22 (see Annex D for classification of hazardous areas and explosion groups). For some types of FIBC@ the requirements of this document apply only to use in hazardous explosive atmospheres with minimum ignition energy of 0@14 mJ or greater and where charging currents do not exceed 3@0 ??. NOTE 2 0@14 mJ represents a realistic minimum ignition energy for a Group IIB gas or vapour atmosphere. Although more sensitive materials exist@ 0@14 mJ is the lowest minimum ignition energy of any material that is likely to be present when FIBC are emptied. 3@0 ?? is the highest charging current likely to be found in common industrial processes. This combination of minimum ignition energy and charging current represents the most severe conditions that might be expected in practice. FIBC are not normally used in Zone 0 or Zone 20. If FIBC are used in Zone 0 or Zone 20@ the requirements of this document are applicable@ together with additional requirements that are beyond the scope of this document to define. The volume contained within FIBC can be designated as Zone 20@ in which case the requirements of this document are applicable. Solids containing residual solvent can result in a hazardous explosive atmosphere within FIBC@ possibly resulting in the volume being designated as Zone 1 or Zone 2; in which case the requirements of this document are applicable. Compliance with the requirements specified in this document does not necessarily ensure that hazardous electrostatic discharges@ for example cone discharges@ will not be generated by the contents in FIBC. Information on the risks associated with cone discharges is given in Annex E. Compliance with the requirements of this document does not mitigate the need for full risk assessment. For example@ metal and other conductive powders and toner powders can require additional precautions to prevent hazardous discharges from the powders. NOTE 3 In the examples mentioned in the paragraph above@ additional precautions can be necessary in the case of metal or other conductive powder because if the powder is isolated and becomes charged@ incendiary sparks can occur@ and in the case of toner powders@ incendiary discharges can occur during rapid filling and emptying operations. IEC TS 60079-32-1 [1]1 gives guidance on additional precautions that can be necessary. Test methods included in this document can be used in association with other performance requirements@ for example when a risk assessment has shown the minimum ignition energy of concern is less than 0@14 mJ@ charging currents are greater than 3@0 ??@ or the ambient conditions are outside of the range specified in this document. Compliance with the requirements specified in this document does not necessarily ensure that electric shocks to personnel will not occur from FIBC during normal use.

Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

IEC 61340-4-4:2018 RLV 静电学.第4-4部分:特殊应用的标准试验方法.柔性中间散装容器（FIBC）的静电分类

Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

KS T ISO 15119:2017 包装 袋 已填充袋摩擦系数的测定

Packaging－Sacks－Determination of the friction of filled sacks

KS T ISO 15119-2017 包装袋填充袋摩擦力的测定

Packaging－Sacks－Determination of the friction of filled sacks

KS T ISO 15119-2017(2022) 包装－袋－填充袋摩擦的测定

Packaging－Sacks－Determination of the friction of filled sacks

T/ZZB 0296-2017 防霉抗菌真空压缩袋

本标准规定了防霉抗菌真空压缩袋（以下简称压缩袋）的产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存、质量保证与服务承诺。 本标准适用于以聚酰胺（PA）或带聚乙烯醇涂层的聚酯（APET）与聚乙烯（PE）薄膜复合制成，使用时用抽气泵将袋内空气排空，以压缩物品体积的方式收纳物品的防霉抗菌真空压缩袋。 本标准不适用于盛装食品的包装袋。其他非防霉抗菌真空压缩袋可参照本标准的相应条款执行。

Vacuum compression bag with anti-mold and antibacterial

KS T 1013-2017 粘贴牛皮纸袋通用规则

General rules for pasted kraft paper sacks

SN/T 4788-2017 集装袋 顶吊试验方法

Container bag overhead hoist test method

SN/T 4789-2017 集装袋 击穿电压试验方法

Test method for breakdown voltage of container bags

DIN EN 13592:2017 家用废弃物收集用塑料袋.类型、要求和试验方法;德文版本EN 13592-2017

Plastics sacks for household waste collection - Types, requirements and test methods; German version EN 13592:2017

JC/T 2411-2017 高岭土包装袋

Kaolin clay packaging bag

DB62/T 692-2017 电石（碳化钙）组合包装袋

Calcium carbide (calcium carbide) combination packaging bag

DB13/T 2471-2017 氧化生物降解塑料袋通用技术要求

General technical requirements for oxo-biodegradable plastic bags

EN 13592:2017 家庭废弃物收集用塑料袋-类型,要求和试验方法

This European Standard specifies the general characteristics, test methods and requirements for sacks, bags and bin liners, made from plastic films, used for household waste collection, or household selective waste collection including the collection of biodegradable waste for organic recycling (biodegradation and composting). For the purpose of this European Standard biodegradable and compostable sacks, including ties if any, are those which comply with EN 13432. This European Standard applies only to sacks, bags and bin liners for which the first use is for household waste collection or household selective waste collection. This European Standard does not apply to sacks used to protect bins and that are not lifted at the emptying operation and thus do not require the same mechanical characteristics. NOTE For editorial reasons, in this document the terms "sack" and "bag" are synonymous.

Plastics sacks for household waste collection - Types@ requirements and test methods

DIN 55445-1:2017-01 包装试验.缝袋试验.第1部分:纸袋胶接缝耐久性的测定

Packaging test - Testing of seams of sacks - Part 1: Determination of endurance of seams of paper sacks