55.080 麻袋、袋子 标准查询与下载

DIN 55445-2:2016-09 包装试验.缝袋试验.第2部分:塑料袋缝口耐久性的测定

Packaging test - Testing of seams of sacks - Part 2: Determination of endurance of seams of plastics sacks

DIN 55445-3:2016-09 包装试验.缝袋试验.第3部分:评价方法

Packaging test - Testing of seams of sacks - Part 3: Evaluation method

DIN 55450:2016 包装方式.纸包装袋.类型

Means of packaging - Paper bags - Types

DIN 55455:2016 包装方式.纸制手提袋.类型

Means of packaging - Paper carrier bags - Types

DB13/T 2361-2016 多层复合食品包装膜、袋

Multi-layer composite food packaging film, bag

GOST 34032-2016 板罐和组合罐. 通用规格

Board and combined cans. General specifications

GOST 33772-2016 纸张和复合材料包. 通用规格

Packets of paper and composite materials. General specifications

KS T 1308-2015 大号纸袋缝合强度测试方法

Testing method of sew-up strength for 1arge-sized paper bag

DB44/T 1714-2015 真空压缩收纳袋

本标准规定了真空压缩收纳袋（以下简称“收纳袋”）的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以聚乙烯（PE）、尼龙（PA）或聚对苯二甲酸乙二醇酯（PET）等材料制成，使用时通过真空压缩的方式收纳物品的袋子。 本标准不适用于盛装食品的包装袋。

Vacuum Compression Storage Bag

ASTM F1278-96(2015) 柔性蒸煮食品袋在加工环境中的使用和处理标准指南

1.1 This guide is recommended for use by all producers of food in retort pouches. Adherence to this guide will help prevent damage to the pouches by preventing and avoiding known causes of damage that occur in the processing environment. 1.2 This guide for flexible retort food pouches is based on the recommendations of a task force created by the Department of the Army in 1986.2 The purpose of the task force was to determine the possible causes of holes in pouches of food product produced for operational rations for the Department of Defense at that time. Members of the task force visited several food processors to observe and evaluate manufacturing methods commonly being used for processing retort pouches. The recommendations in this guide should be useful as the basis for good manufacturing practices and employee training programs used by food pouch processors.3 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment

GSO ISO 11897:2015 包装 由柔性热塑性层压材料制成的袋子 折叠边缘处的撕裂扩展

This International Standard specifies a method for the determination, under given conditions, of the resistance to tear propagation on an edge fold of sacks made from thermoplastic flexible film. Measurements on folded and unfolded film permit the determination of the residual resistance in the fold.

Packaging -- Sacks made from thermoplastic flexible film -- Tear propagation on edge folds

KS T ISO 8281-1-2015 包装 用平面尺寸估算填充体积 第1部分：纸袋

Packaging－Estimating the filled volume using theflat dimensions－Part 1：Paper sacks

KS T ISO 6591-1:2015 空纸袋的尺寸标识与测量方法

Description and method of measurement for empty paper sack

ASTM F88/F88M-15 柔性阻隔材料密封强度的标准试验方法

4.1 Seal strength is a quantitative measure for use in process validation, process control, and capability. Seal strength is not only relevant to opening force and package integrity, but to measuring the packaging processes' ability to produce consistent seals. Seal strength at some minimum level is a necessary package requirement, and at times it is desirable to limit the strength of the seal to facilitate opening. 4.1.1 The maximum seal force is important information, but for some applications, average force to open the seal may be useful, and in those cases also should be reported. 4.2 A portion of the force measured when testing materials may be a bending component and not seal strength alone. A number of fixtures and techniques have been devised to hold samples at various angles to the pull direction to control this bending force. Because the effect of each of these on test results is varied, consistent use of one technique (Technique A, Technique B, or Technique C) throughout a test series is recommended. Examples of fixtures and techniques are illustrated in Fig. 1. 4.2.1 Technique A: Unsupported—Each tail of the specimen is secured in opposing grips and the seal remains unsupported while the test is being conducted. 4.2.2 Technique B: Supported 90° (By Hand)—Each tail of the specimen is secured in opposing grips and the seal remains hand-supported at a 90° perpendicular angle to the tails while the test is being conducted. 4.2.3 Technique C: Supported 180°—The least flexible tail is supported flat against a rigid alignment plate held in one grip. The more flexible tail is folded 180° over the seal and is held in the opposing grip while the test is being conducted. 1.1 This test method covers the measurement of the strength of seals in flexible barrier materials. 1.2 The test may be conducted on seals between a flexible material and a rigid material. 1.3 Seals tested in accordance with this test method may be from any source, laboratory or commercial. 1.4 This test method measures the force required to separate a test strip of material containing the seal. It also identifies the mode of specimen failure. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.6 This standard does not purport to address all ......

Standard Test Method for Seal Strength of Flexible Barrier Materials

KS T 1066-2014 可伸缩牛皮纸袋

Extensible kraft paper sacks

IEC 61340-4-4:2012+AMD1:2014 CSV 静电学 第4-4部分 特殊材料的标准试验方法 应用 柔性中间体的静电分类 散装集装箱（FIBC）

Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

IEC 61340-4-4:2012/AMD1:2014 静电学 第4-4部分 特殊材料的标准试验方法 应用 柔性中间体的静电分类 散装集装箱（FIBC）

Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

BB/T 0068-2014 邮寄包装用瓦楞纸袋

本标准规定了邮寄包装用瓦楞纸袋的要求、试验方法、检验规则、标志、包装、运输和储存。本标准适用于内装物不超过5kg的邮寄包装用瓦楞纸袋(以下简称瓦楞纸袋)的生产与检验,纸板包装袋可参考使用。

Postal packaging corrugated board paper bag

GOST 32736-2014 综合材料制成消费包装. 通用规格

Consumers' package from combined materials. General specifications

KS G 2700-2013 书包的标准尺寸和重量

STANDARD SIZE AND WEIGHT OF SATCHELS