55.160 箱、盒、板条箱 标准查询与下载

CNS 14663-2002 包装物品之提运处理注意标示

本标准规定于一般消费者为主，对于包装物品（1）之提运处理（2）时，为确保其安全，于包装（3）之表面等所能力口之提运处理注意标示及标示方法加以规定。注（1）于流通过程中，依一般消费者能以手提运之大小及质量为单位，所施加包装之商品。（2）将所购买之包装物品取回提

Marking for attention in handling of packaged goods

CNS 10034-2002 包装货物试验容器之部位标示方法

本标准规定包装货物及其试验容器部位之记号标示方法。

Packaging-Complete，filled transport packages-identification of parts when testing

ASTM D6804-02 瓦楞纸箱手孔设计的标准指南

1.1 This standard provides guidelines for designing pre-cut apertures intended for use as hand holes in corrugated boxes during manual handling of boxed cargo.1.2 Limitations8212;This standard offers guidance for package development and for subsequent testing of boxes to measure performance. It is not intended to provide specific information on the design of hand holes.1.3 The values stated in inch-pound units are to be regarded as the standard. The SI units are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Hand Hole Design in Corrugated Boxes

CAN/CGSB-43.22-2001 瓦楞硬质纤维板产品

1. Objet 1.1 La présente norme s'applique aux conteneurs¹ d'expédition intérieurs et extérieurs en carton dur ondulé pour utilisation au Canada et à l'étranger ainsi qu'aux éléments intérieurs des conteneurs. 1.2 La mise à l'essai et l'évaluation d'un produit en regard de la présente norme peuvent nécessiter l'emploi de matériaux et d'équipement susceptibles d'être dangereux. Le présent document n'entend pas traiter de tous les aspects liés à la sécurité de son utilisation. Il appartient à l'usager de la norme de se renseigner auprès des autorités compétentes et d'adopter des pratiques d'hygiène et de sécurité conformes aux règlements en vigueur avant de l'utiliser. - - - ¹ Le mot "boîte" est également utilisé dans l'industrie pour désigner les "conteneurs".

Corrugated hardboard products

LST EN 13117-2-2001 运输包装 可重复使用的硬质塑料配电箱 第2部分：测试的一般规范

Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing

LST EN 13117-1-2001 运输包装 可重复使用的硬质塑料配电箱 第1部分：通用应用

Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application

LST EN 23-1-2001 洗衣粉和清洁粉包装 纤维板纸箱和圆桶的尺寸和体积

Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibre board

GOST 9481-2001 装化学线用的瓦楞纸板箱.一般技术条件

Настоящий стандарт распространяется на ящики из гофрированного картона для химических (искусственных и синтетических) нитей в бобинах, к

Corrugated board boxes for chemical threads. Specifications

DS/EN 13199-3:2000 包装 小型载重系统 第3部分：粘合堆叠系统（BSS）

This part of the standard specifies the main characteristics and the testing of durable, re-usable parallelepipedic boxes and their accessories which form a bond stackable system designed to contain bulk or precisely located component loads up to a maximum useful load of 50 kg.

Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)

DS/EN 13199-2:2000 包装 小型载重系统 第2部分：立柱堆叠系统（CSS）

This standard specifies the main characteristics and the testing of reusable durable parallelepipedic SLCs and their accessories which form a column stackable system designed to contain bulk or precisely located component loads up to maximum load of 20 kg.

Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS)

DS/EN 13199-1:2000 包装 小型载重系统 第1部分：通用要求和测试方法

This part of the standard specifies the essential characteristics and the common requirements and test methods for small load carrier systems used in the handling, transport and storage of non-food products.

Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods

DIN EN 13199-1:2000 包装.小型货物的载运系统.第1部分:通用要求和试验方法

The document specifies the essential characteristics and the common requirements and test methods for small load carrier systems used in the handling, transport and storage of non-food products. The document is based on performance requirements and this does not include specific design features. However, it includes essential requirements to allow for third-party assessment and certification of the products specified.

Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods; German version EN 13199-1:2000

DIN EN 13199-3:2000 包装.低负重载运系统.第3部分:联结式叠架

The document specifies the main characteristics and the testing of durable, reusable parallelepipedic boxes and their accessories which form a bond stackable system designed to contain bulk or precisely located component loads up to a maximum useful load of 50 kg.#,,#

Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS); German version EN 13199-3:2000

DIN EN 13199-2:2000 包装.小型货物的载运系统.第2部分:柱形堆朵法

The document specifies the main characteristics and the testing of reusable durable parallelepipedic SLCs and their accessories which form a column stackable system designed to contain bulk or precisely located component loads up to a maximum load of 20 kg. Illustrations of functional features are given in Annex D (informative).

Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS); German version EN 13199-2:2000

BS EN 13199-2:2000 包装.低负荷载运系统.柱形叠架制(CSS)

This standard specifies the main characteristics and the testing of reusable durable parallelepipedic SLCs and their accessories which form a column stackable system designed to contain bulk or precisely located component loads up to maximum load of 20 kg. Illustrations of functional features are given in Annex D (informative).

Packaging. Small load carrier systems. Column Stackable System (CSS)

BS EN 13199-1:2000 包装.低负荷载运系统.通用要求和试验方法

This part of EN 13199 specifies the essential characteristics and the common requirements and test methods for small load carrier systems used in the handling, transport and storage of non-food products. The application of such systems is described in Annex C. This part of EN 13199 is to be read in conjunction with the particular part which specifies the chosen system. This standard is based on performance requirements and thus does not include specific design features. However it includes essential requirements to allow for third-party assessment and certification of the products specified.

Packaging. Small load carrier systems. Common requirements and test methods

BS EN 13199-3:2000 包装.低负荷载运系统.联结式叠架制(BSS)

This part of the EN 13199 specifies the main characteristics and the testing of durable, re-usable parallelepipedic boxes and their accessories which form a bond stackable system designed to contain bulk or precisely located component loads up to a maximum useful load of 50 kg.

Packaging. Small load carrier systems. Bond Stackable System (BSS)

BS EN 13117-2:2000 运输包装.可重复使用的刚性塑料配送箱.通用试验规范

This standard specifies minimum performance requirements and methods of testing for reusable rigid plastics transport packaging as specified in EN 13117-1. Special applications such as heavy loads, low or high operating temperatures will require an agreement to be made between the supplier and the user to supply a box to satisfy his requirements. EXAMPLE: - heavy loads; - metal components; - low temperatures below -20 ℃; - high temperatures above +30 ℃.

Transport packaging. Reusable, rigid plastics distribution boxes. General specifications for testing

BS EN 13117-1:2000 运输包装.可重复使用的刚性塑料配送箱.通用配送箱

This standard specifies the four main types of reusable rigid plastics distribution boxes for application in the fields of handling, transport, storage and display of food and non-food products in distribution systems from the point of manufacture to the point of retail services: These are: a) rigid parallelepipedic and rectangular boxes (stackable boxes) b) foldable boxes c) nestable boxes d) nestable and stackable boxes. These boxes are based on the modular area 600 mm × 400 mm and subdivisions or multiples of it.

Transport packaging. Reusable, rigid plastics distribution boxes. General purpose application

DS/EN 13117-1:2000 运输包装 可重复使用的硬质塑料配电箱 第1部分：通用应用

This standard specifies the four main types of reusable rigid plastics distribution boxes for application in the fields of handling, transport, storage and display of food and non-food products in distribution systems from the point of manufacture to the point of retail services.

Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application