55.160 箱、盒、板条箱 标准查询与下载

DIN EN 14482:2011 邮政服务.国际信件邮寄用托盘.试验方法和性能要求;德文版本EN 14482-2010

Postal services - Trays for international letter mail - Test methods and performance requirements; German version EN 14482:2010

ASTM D5639/D5639M-11(2015) 基于性能要求对瓦楞纸板材料和箱结构进行选择的标准实施规程

4.1 This practice assists users in selecting appropriate performance characteristics of corrugated fiberboard or box construction, or both, commensurate with the user's need for packing and distribution of goods. This practice describes several attributes of fiberboard and boxes which relate to various hazards encountered in distribution and describes test parameters which may be specified by the user to ensure sufficient strength in the box for containment, storage, handling, and protection of contents. 4.2 The user should specify only those attributes and related tests which are required for satisfactory performance in the user's operations and distribution cycle(s). When using packaging regulations as a basis for developing specifications, the reason for the existence of the regulation and its function and importance should be understood. As previously stated, regulations may be exceeded and should be when the minimum specifications are inadequate for the full effects of the distribution cycle. If the user decides to employ box compression strength or a rough handling performance protocol as the overriding specification, it should be noted that all minimum standards required by various organizations shall also be met or surpassed. These minimum standards can be stated in the box drawing so as to ensure adherence to regulations If a Box Manufacturer’s Certificate (BMC) is printed on the box, then the ECT or Mullen Burst/Basis Weight values shall meet or exceed the minimum requirements for size and weight of the packaged product. 4.3 See Appendix X7 for several examples of specification determinations. 1.1 This practice provides information on corrugated fiberboard for the prospective user who wants guidance in selecting attributes of materials and box construction based on performance requirements. These attributes should be part of specifications which establish levels of the qualities a shipping container shall have in order to be acceptable to the purchaser or user. The attributes and qualities should be testable, using standard methods that are recognized by both the buyer and seller. This practice will assist users in developing specifications for corrugated containers through an analysis of performance requirements and subsequent relationships to fiberboard materials and box construction attributes. This practice is intended to provide specific corrugated container performance standards as opposed to packaged product performance evaluation through distribution and handling environments, such as Practice D4169. 1.2 The attributes and their levels should be based on the intended use of the box, including the handling and environment it will encounter. Many packaging regulations include detailed descriptions of the materials that may be used and style, closure, or other construction details of allowed shipping containers. These regulations are presented as minimum requirements; they may be exceeded for functional reasons, but there is no regulatory reason to do so. Rail and motor freight classifications applicable for surface common carrier transportation have established minimum requirements for certain attributes of corrugated packaging. These may or may not be appropriate for application in the complete distribution system, as they encompass only containerboard or combined corrugated board—not finished boxes—and are not intended......

Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

ANSI/ASABE S600-2011 搬运水果和蔬菜的手动操作可折叠可重复使用的塑料容器

Provides uniform design and performance specifications for a manually handled collapsible reusable plastic container for handling fresh horticultural produce during post-harvest processing, storage, and transportation.

Manually Handled Collapsible Reusable Plastic Containers for Handling of Fruits and Vegetables

GOST R 54463-2011 食品用微量板包装和复合材料.规范

Package from paperboard and composite materials for food-stuffs. Specifications

KS T 1005-2010 包装用木箱术语

이 표준은 나무상자, 틀상자 및 포장용 받침에 사용하는 주요 용어에 대하여 규정한다.

Glossary of terms used in wooden box for packing

KS T 1021-2010 低温流通用包装箱及容器

이 표준은 12개의 대표적인 농산물인 사과, 배, 딸기, 당근, 단감, 감귤, 배추, 오이

Standard packaging container for low temperature distribution

VDA 4500 Anhang Schadenskatalog-2010 受损VDA KLT系统的损伤分类

Damage classification for damaged VDA KLTs

ASTM D6256/D6256M-10 木楔固定的运货箱和滑动搬运底盘的标准规范

1.1 This specification covers the fabrication of new wood-cleated boxes with skidded, load-bearing bases. Boxes covered by this specification are designed for nonregulated domestic and overseas shipment of loads less than 2500 lb [1134 kg] and not greater than 16 ft [4877 mm] in length (see 9.1). Regulated commodities shipments may require better boxes than those specified herein (see 9.2). 1.2 The performance of wood-cleated boxes with skidded, load-bearing bases is dependent on their fabricated components; therefore, a variety of types, styles, and classes reflecting varied performance are specified. This specification, however, does not cover box performance under all atmosphere, handling, shipping and storage conditions. 1.3 If the use of other construction methods or techniques are acceptable and permitted (see 5.1.18), the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle specified in Practice D4169 can be used to develop comparative procedures and criteria. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. See for conversion of units. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases

EN 14482:2010 邮政服务设施.国际文字邮件格(盘).试验方法和性能要求

This European Standard specifies the performance requirements and testing methods for standard letter mail trays, as specified in the classification below. The trays should be used to facilitate the exchange of international mail. The technical specification of the trays should be such that the performance requirements specified herein are met and tests specified herein successfully completed. The technical specifications of trays as such however, are beyond the scope of this standard. The trays are suitable for containing C4 mail stacked in a horizontal plane and for stacking C5 and C6 mail vertically.

Postal services - Trays for international letter mail - Test methods and performance requirements

SANS 456:2009 瓦楞纸板箱

Covers the definitions, the general requirements (including those for packing, marking, and storage), the method of inspection, and all methods of test applicable to single-trip corrugated board containers.

Corrugated board containers

KS A 2154-2007 线装盒

WIREBOUND BOXES

KS A 2157-2007 板条箱、板条、线装盒

CRATES, SLATTED, WIREBOUND BOXES

DS/ISO 16883:2007 包装 危险品运输包装 大型容器的试验方法

This Standard specifies the design type test requirements for large packagings as described in 3.2 of this standard and intended for use in the transport of dangerous goods.

Packaging - Transport packages for dangerous goods - Test methods for large packagings

SANS 1485:2007 挠性中型散货集装箱

Covers new FIBCs of nominal capacity not exceeding 3 m3 and of maximum gross mass not exceeding 3 000 kg, for transportation and storage of non-dangerous solids in granulated or powder form and dangerous solids of Groups II and III.

Flexible intermediate bulk containers

BB/T 0043-2007 塑料物流周转箱

本标准规定了内装物质量不大于70kg的塑料物流周转箱（以下简称为周转箱）的产品分类、要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于采用聚烯烃塑料为原料，采用注射成型法生产的周转箱。

Plastic logistics containers

BB/T 0040-2007 拼装式胶合板箱

本标准规定了拼装式胶合板箱的结构型式、术语和定义、要求、试验方法、检验规则以及标志、包装、运输和储存等。 本标准适用于承载不超过2000kg，且综合尺寸不超过6m的拼装式胶合板箱。

Assembled plywood case

BB/T 0038-2006 包装容器 1m3金属中型散装箱

本标准规定了1m3金属中型散装箱(以下简称容器)的基本要求、试验方法、检验规则、标志、运输、贮存等要求。 本标准适用于装运1m3金属中型散装箱的制造、流通、使用和监督等领域。

Packaging container 1m3 metal intermediate bulk box

CNS 13294-2006 瓦楞纸箱之型式

本标准适用于外装用瓦楞纸箱、内装用瓦楞纸箱及其附件之型式、名称及说明。

Types of corrugated paperboard boxes

GOST 12301-2006 纸板盒子纸及复合性材料盒子.一般技术要求

Cartons of paperboard, paper and composite materials. General specifications

GOST 13511-2006 装食品火柴,烟草和洗涤剂用的瓦楞纸板箱.技术条件

Boxes of corrugated board for food-stuffs, matches, tobacco and detergents. Specifications