55.160 箱、盒、板条箱 标准查询与下载

DB12/T 718.1-2016 初级农产品周转箱技术要求 第1部分：种植业

本标准适用于天津市果蔬、粮食等种植业食用初级农产品用周转箱的设计、制造、销售和检测。

Technical Requirements for Turnover Boxes for Primary Agricultural Products Part 1: Planting Industry

DB12/T 713-2016 周转箱 装卸操作规范

本标准适用于天津市商贸物流过程周转箱的管理与装卸操作

Turnover box loading and unloading operation specification

DB12/T 718.2-2016 初级农产品周转箱技术要求 第2部分：畜牧业、渔业

本标准适用于天津市食用畜禽肉和水产品用周转箱的设计、制造、销售和检测

Technical Requirements for Turnover Boxes for Primary Agricultural Products Part 2: Animal Husbandry, Fishery

KS T 1022-2016 送货上门的标准尺寸包装容器

Standard dimension packaging container for home delivery

KS T 1022-2016(2021) 家用标准尺寸包装容器

Standard dimension packaging container for home delivery

ASTM D6256/D6256M-16 具有带挡板承重基座的木材装卸箱的标准规范

1.1 This specification covers the fabrication of new woodcleated boxes with skidded, load-bearing bases. Boxes covered by this specification are designed for nonregulated domestic and overseas shipment of loads less than 2500 lb [1134 kg] and not greater than 16 ft [4877 mm] in length (see 9.1). Regulated commodities shipments may require better boxes than those specified herein (see 9.2). 1.2 The performance of wood-cleated boxes with skidded, load-bearing bases is dependent on their fabricated components; therefore, a variety of types, styles, and classes reflecting varied performance are specified. This specification, however, does not cover box performance under all atmosphere, handling, shipping and storage conditions. 1.3 If the use of other construction methods or techniques are acceptable and permitted (see 5.1.18), the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle specified in Practice D4169 can be used to develop comparative procedures and criteria. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. See IEEE/ASTM SI 10 for conversion of units. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases

DIN 55429-2:2016 包装.纸板、硬纤维板或波纹板制箱子.第2部分:尺寸、极限偏差、尺寸检验

Packaging - Boxes manufactured from board, solid fibreboard or corrugated fibreboard - Part 2: Dimensions, limit deviations, testing of dimensions

GOST 33746-2016 可回收聚合材料盒. 通用规格

Returnable polymeric boxes. General specifications

GOST 33781-2016 纸板, 纸张和复合材料的消费包装. 通用规格

Consumer package of paperboard, paper and composite materials. General specifications

GOST 34033-2016 纸板和复合材料的食品包装. 规格

Package of paperboard and composite materials for food-stuffs. Specifications

WB/T 1058-2015 汽车零部件物流器具分类及编码

本标准规定了汽车零部件物流中物流器具的分类及编码。 本标准适用于汽车零部件物流中可周转使用的物流器具。

Classification and coding of automobile inbound logistics appliance

LY/T 2500.2-2015 活体野生动物运输容器.第2部分:标签与标识

本部分规定了活体野生动物运输容器标签与标识设计制作的通用要求、标签和标识分类与粘贴规则。本部分适用于活体野生动物运输容器标签与标识的设计制作与规范使用，其他活体动物运输容器标签与标识也可参考使用。

Live wild animal transport container.Part 2: Marking and Labeling

KS T 1006-2015 瓦楞纸箱类型

Types of corrugated fibreboard boxes

KS T 1006-2015(2020) 瓦楞纸箱类型

Types of corrugated fibreboard boxes

ASTM D6804-02(2015) 瓦楞纸箱手孔设计的标准指南

1.1 This standard provides guidelines for designing pre-cut apertures intended for use as hand holes in corrugated boxes during manual handling of boxed cargo. 1.2 Limitations—This standard offers guidance for package development and for subsequent testing of boxes to measure performance. It is not intended to provide specific information on the design of hand holes. 1.3 The values stated in inch-pound units are to be regarded as the standard. The SI units are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Hand Hole Design in Corrugated Boxes

ASTM D5118/D5118M-15 纤维板装运箱制造的标准实施规程

4.1 Corrugated and solid fiberboard boxes, sleeves and liners are used to unitize products into packages of size and shape suitable for manual or mechanical handling and to protect the contents against environmental, handling, shipping, and storage conditions. 4.2 This practice covers some of the basic constructions and styles of commercially available fiberboard packaging used to unitize and protect contents. 4.3 Use of Other Specifications—Nothing in this practice shall be construed to prohibit the use of boxes of special design or of fiberboard packages identified by package number in the current Uniform Freight Classification and National Motor Freight Classification when in the experience and judgment of the purchaser, the nature of the articles or material to be shipped justifies such boxes or packages. Some commodities may require less protection while other commodities may require better boxes than are specified herein. Containers for explosives and dangerous articles must also comply with regulations for the Transport of Hazardous Materials (CFR Title 49). 1.1 This practice covers the fabrication of new fiberboard boxes, liners and sleeves. 1.2 This practice points out the factors and components that must be controlled in the manufacture of corrugated and solid fiberboard boxes, liners and sleeves. 1.3 This practice does not cover the adequacy of fiberboard containers under all conditions of exposure to atmosphere, handling, shipping and storage. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Fabrication of Fiberboard Shipping Boxes

KS T 1203-2014 出口包装用木条木箱的建造

Construction of battened wooden boxes for export packing

KS T 1087-2014 包装用木箱的构造

Construction of wooden boxes for packing

KS T 1201-2014 木框包装箱的构造

Construction of Wooden framed boxes for packing

KS T 1061-2014 瓦楞纸板集装箱

Corrugated fiberboard shipping containers