77.180 冶金设备 标准查询与下载

JB/T 14243-2022 热连轧机组 定宽压力机 通用技术规范

General technical specifications for fixed-width presses in hot tandem rolling mills

JB/T 14250-2022 铝带热精轧机 技术规范

Technical Specifications for Hot Finishing Rolling Mills for Aluminum Strips

YB/T 6035-2022 金属带材开卷机卷筒与卷取机卷筒修复技术规范

本文件规定了金属带材开卷机卷筒与卷取机卷筒修复的术语和定义、失效形式、修复方法、技术要求、检验方法、标志、包装、运输及贮存。 本文件适用于金属带材开卷机卷筒和卷取机卷筒的修复，其他类似卷筒的修复亦可参照使用。

Technical specification for repair of metal strip uncoiler drums and coiler drums

YB/T 6034-2022 冶金轧机轴承座修复技术规范

本文件规定了冶金轧机轴承座修复的术语和定义、失效部位和表现形式、技术要求、检验方法、检验规则、包装、运输、贮存及应提交的技术资料。 本文件适用于冶金轧机轴承座的修复，亦适用于类似轴承座的修复。

Technical Specification for Repair of Bearing Seats of Metallurgical Rolling Mills

YB/T 6033-2022 冶金轧机机架在线修复技术规范

本文件规定了冶金轧机机架在线修复的术语和定义、失效部位和表现形式、修复方法、技术要求、检验方法、检验规则、防护及应提交的技术资料。 本文件适用于冶金轧机机架的在线修复，亦适用于类似冶金设备的在线修复。

Technical Specifications for Online Repair of Metallurgical Rolling Mill Stands

T/HEBQIA 090-2022 铁素体耐热钢烧结机篦条

本文件规定了铁素体耐热钢烧结机篦条的技术要求、生产工艺、试验方法、检验规则、标志、包装、订货条件等。

Ferritic heat-resistant steel sintering machine grate

BS EN 15061:2022 机械安全 带钢加工线机械设备安全要求

1   Scope This document defines the general safety requirements of strip processing lines . This document applies to: Strip processing lines for treating metal strip , from — coil take-over-point of the entry section ( terminal equipment , see 3.2) through the — process (processing and terminal equipment , see 3.3 and 3.2) up to the — coil take-over-point of the exit section or interface to other lines ( terminal equipment ), see Figure 1. Figure 1 — Terminal and processing equipment NOTE 1 The aforementioned processes can also occur in combination. If the aforementioned processes will be combined with processes which are not covered by the scope of this document, this document can be used as a guideline.

Safety of machinery. Safety requirements for strip processing line machinery and equipment

T/HEBQIA 086-2022 冶金连铸机辊系再制造技术规范

本文件规定了冶金连铸机辊系再制造性能评估、缺陷处理、辊系装配要求、检验方法、验收及运输。

Technical specification for remanufacturing of metallurgical continuous casting machine roll system

T/SSEA 0202-2022 锂电池极片轧机轧辊

本文件规定了锂电池极片轧机用轧辊的技术要求、试验方法、检验规则、标记、包装、运输和储存。 本文件适用于锂电池极片轧机用轧辊（以下简称轧辊）。

Lithium battery pole piece rolling mill roll

T/CISA 236-2022 钢铁企业润滑管理导则

本文件规定了钢铁企业设备润滑管理的术语和定义、基本要求、重点设备润滑剂选择、润滑剂贮存要求、润滑剂加换要求、设备润滑监测、循环系统污染控制、废油管理以及健康、安全、环保等要求。 本文件适用于钢铁企业焦化、烧结、炼铁、炼钢、轧钢等主要生产流程中的润滑管理。

Guidelines of lubrication management for steel enterprise

T/CISA 237-2022 钢铁企业润滑油在线监测技术导则

       本文件规定了钢铁行业设备油液在线监测系统的术语和定义、总则、系统组成、监测指标选择原则、技术要求，系统的试验、调试和验收等内容。        本文件适用于钢铁行业设备稀油集中润滑系统、液压系统的在线油液监测。

Technical guidelines for oil on-line monitoring in steel enterprise

BS EN 15094:2022 机械安全 冷扁钢轧机安全要求

1   Scope This document specifies the general safety requirements for cold rolling mills for flat products as defined in 3.1. This document is applicable to : Plant (machinery, equipment, devices according Annex D) used for the manufacturing of metal cold rolled flat products from the material supply from entry (1), via the mill stand(s) (2) with roll changing devices (4), to the material removal (3) (see Figure 1). Figure 1 — Exemplary layout of a cold flat rolling mill Key 1 entry section 2 cold rolling mill 3 exit section 4 ...

Safety of machinery. Safety requirements for cold flat rolling mills

BS EN 15093:2022 机械安全 热平轧机安全要求

1   Scope This document specifies the general safety requirements for hot rolling mills for flat products as defined in 3.1. This document is applicable to: Plant (machinery, equipment, devices according Annex D) used for the manufacturing of metal hot rolled flat products from the from entry (1), via the mill stands (2) with roll changing devices (6), to the exit (5) (see Figure 1). Figure 1 — Exemplary layout of a hot flat rolling mill Key 1 material supply (excluded from the Scope), 4 coiler or plate transport e.g. continuous casting machine (according to EN 14753) or furnace (according to EN 746‑1) 5 material removal or plate processing ...

Safety of machinery. Safety requirements for hot flat rolling mills

YB/T 4924-2021 强逆流混合机

Strong countercurrent mixer

YB/T 4923-2021 高炉用铸钢冷却壁

Cast steel cooling stave for blast furnace

T/SSEA 0163-2021 高延性冷轧带肋钢筋生产线 通用技术要求

本文件规定了高延性冷轧带肋钢筋生产线的术语和定义、型号和组成、生产能力和工作条件、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于高延性冷轧带肋钢筋生产线（以下简称生产线）。

General technical requirements for high ductility cold-rolled ribbed steel bar production line

T/CSTM 00577-2021 油气田设备和材料绿色制造通用要求

本文件规定了油气田设备和材料绿色制造的绿色属性、绿色设计、制造、再制造、绿色评价、绿色管理和标识等通用技术要求。 本文件适用于石油和天然气工业用油气田设备和材料的制造与应用，石化领域设备和材料的绿色制造可参考使用。

General requirements for green manufacturing of oil and gas-field equipment and materials

T/SCMES 10-2021 有色金属线材连铸连轧生产线

本文件规定了有色金属线材连铸连轧生产线（以下简称生产线）的术语和定义、分类和型号编制、基本参数、要求、试验方法、检验规则、标志、包装、运输、贮存。 本文件适用于生产铜、铝、铝合金线材的连铸连轧生产线。

Non-ferrous metal wire continuous casting and rolling production line

FprEN 15061-2021 机械安全 带材加工线机械设备安全要求

Safety of machinery - Safety requirements for strip processing line machinery and equipment

FprEN 17449-2021 机械安全 金属带材精整线安全要求

Safety of machinery - Safety requirements to finishing lines for metal strip