77.180 冶金设备 标准查询与下载

YB/T 6167-2024 板带轧机厚度控制液压缸

本文件规定了板带轧机（含平整机）厚度控制液压缸的术语和定义，分类、标记和基本参数，技术要求、试验方法、检验规则，标志、使用说明书、包装、贮存和运输等要求。 本文件适用于以液压油为工作介质的板带轧机厚度控制液压缸，使用其它工作介质的同类液压缸亦可参照使用。

Plate and strip mill thickness control hydraulic cylinder

T/QGCML 3900-2024 精密自动轧管机及轧管方法的应用规范

本文件规定了精密自动轧管机及轧管方法的应用规范的术语和定义、设备组成及轧管方法、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于精密自动轧管机及轧管方法的应用。

Application specifications for precision automatic pipe rolling machines and pipe rolling methods

T/QGCML 2975-2024 铝用矫直机雾化装置

本文件规定了铝用矫直机雾化装置的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于铝用矫直机雾化装置的生产、检验和使用。以下简称“装置”。

Atomization device for straightening machine for aluminum

YB/T 4191-2023 高炉进风装置

本文件规定了高炉进风装置的术语和定义、结构型式和代号、技术要求、检验与试验、检验规则、标志及包装、贮存和运输、安装与使用等要求。本文件适用于不同容积高炉的进风装置。

Blast furnace air inlet device

YB/T 063-2023 面压式滑动水口

本文件规定了面压式滑动水口的术语和定义、分类、型号、基本参数、技术要求、试验方法、检验规则、标志、包装、贮存和运输。本文件适用于面压式滑动水口的整机制造（不含滑板砖）。

Surface pressure sliding nozzle

YB/T 4192-2023 铸铁机

本文件规定了铸铁机的术语、分类、结构型式及规格、参数与代号、技术要求、检验方法、检验规则、标志、包装、运输及贮存等。本文件主要适用于高炉或非高炉炼铁工艺产出的铁水连续浇铸为铁块的铸铁机。本文件适用于铸铁机主机部分，包含电动机、减速机、主动链轮装置和从动链轮装置（含拉紧装置）、滚轮、滚轮支撑梁、轨道、链带装置和铸铁模等。不包含倾翻支柱、铁水流槽、铁块溜槽、挡铁块装置、喷浆装置、接浆斗、喷淋冷却段、自动脱铁装置、排渣装置、铸铁模烘干装置及除尘系统等附属设备。

cast iron machine

YB/T 073-2023 烧结台车技术条件

本文件规定了烧结台车的主要结构、技术要求、试验方法、检验规则、标志、包装、运输及贮存。本文件适用于带式烧结机用的烧结台车。

Technical conditions of sintering trolley

T/HEBQIA 202-2023 高炉用铜钢复合冷却壁

本文件规定了高炉用铜钢复合冷却壁的技术要求、试验方法、检验规则、标志、包装、运输、贮存。

Copper steel composite cooling stave for blast furnace

T/SHLX 001-2023 高强度铝合金热挤压模具

1、确定了高强度铝合金热挤压模具的各类模具的类型、模具结构、适用产品以及使用模具钢牌号。 2、明确了高强度铝合金热挤压模具使用的材料成分。 3、阐述了高强度铝合金热挤压模具的设计具体要求、模具结构设计考虑的主要因素、模孔设计的重要原则、模拟挤压验证的要求和操作、模具制造的主要影响因素。 4、对高强度铝合金热挤压模具的相关尺寸偏差进行了规定。 5、规定了高强度铝合金热挤压模具热处理后，模具钢的相应洛氏硬度。

Hot Extrusion Die Used For High Strength Aluminum Alloy

T/SSEA 0309-2023 转炉副枪复合传感器

本文件规定了转炉副枪复合传感器的术语和定义、产品分类、结构示意图及型号标记、技术要求、试验方法、检验规则、标志、包装、贮存和质量证明书。 本文件适用于各种型号的转炉副枪测温定碳复合传感器和测温定氧复合传感器（亦简称“副枪复合传感器”）。

Converter auxiliary gun composite sensor

ASTM F1348/F1348M-91(2023) 气动旋转除鳞机标准规范

1.1 This specification covers requirements for pneumatic rotary descaling machines for removal of paint, rust, scale, nonskid deck covering, and other coatings from steel and aluminum structures. These portable machines are intended for use in a marine environment, subject to salt air and spray during use and high humidity during storage. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.3 The following precautionary statement pertains to the test method portion only, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 17.2.1. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Pneumatic Rotary Descaling Machines

YB/T 6089-2023 连铸坯火焰切割机

本文件规定了连铸坯火焰切割机的术语和定义、组成、分类、型号、基本参数、技术要求、安全环保要求、试验方法、检验规则、标志、包装、运输和贮存。本文件适用于以工业气体为燃气介质切割连铸坯的火焰切割机，即可配置为定尺（倍尺）坯、试样坯切割，切头、切尾的在线连铸坯火焰切割机，也可配置为完成短定尺坯、冷坯、废料坯等切割的离线火焰切割机。其他相关的火焰切割机亦可参照使用。

Continuous casting slab flame cutting machine

T/CHBAS 29-2023 双金属复合耐磨材料铸件

本文件规定了双金属复合耐磨材料铸件（以下简称铸件）的分类、牌号和代号、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于建材、电力、冶金、矿山和机械等行业的双金属铸件。其它用途的双金属铸件参照使用。

Bimetal composite wear-resistant material casting

ISO 4529:2023 工业炉和相关加工设备.二次炼钢.液态钢处理机械和设备

This document: — specifies the general safety requirements for secondary steelmaking machinery and equipment (SSME) as defined in 3.1 to treat liquid steel; — deals with all significant hazards, hazardous situations and events pertinent to SSME, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable misuse, faults and malfunctions; — specifies the requirements to ensure the safety of persons which are to be met during the design, pre-assembly, transport, sites assembly, commissioning, operation, maintenance, decommissioning and dismantling/ disassembling of the equipment; — assumes that SSMEs are operated and maintained by adequately trained and competent personnel. Manual intervention for setting, adjustment and maintenance is accepted as part of the normal use of the equipment. This document applies to SSME involved in the treatment process of liquid steel under vacuum or atmospheric pressure and covers: — LF, ladle furnace, — VD, vacuum degassing, — VOD, vacuum oxygen decarburization, — RH (OB), Ruhrstahl Heraeus (oxygen blowing), — process related interfaces/interactions (e.g. according to design, controls) to: a) process media, b) primary and secondary gas cleaning plant, c) material handling systems, d) transfer cars for steel ladle, and e) crane and ladle. NOTE 1 Due to the variety of secondary metallurgical processes, there are other variants (e.g. VODC – vacuum oxygen decarburization converter, CAS, CAS - OB) in addition to the main processes discussed in this document. Most countries require that applicable safety requirements, specific to this equipment be implemented. This document does not cover safety requirements for the following equipment: — cranes; — transfer cars, e.g. ladle transfer cars, tank cars, maintenance cars; — fork lift trucks or other transporting equipment; 1 — ladles; — equipment for relining and preheating in the relining area; — burners according to ISO 13577-2 (the burner lances for RH vessels are covered by ISO 13577-2 except for maximum main burner ignition time, see 5.2.26.2); — cleaning and treatment of dust and fume exhaust systems; — process media (e.g. air separation, boiler house, steam generation system); — material handling systems. NOTE 2 Significant hazards and hazardous situations due to transporting/positioning of heavy components, e.g. by cranes (e.g. ladles, vessels, covers) are considered in this document (see 5.2.3). This document is not applicable to SSMEs and associated equipment manufactured before the date of its publication.

Industrial furnaces and associated processing equipment — Secondary steelmaking — Machinery and equipment for treatment of liquid steel

T/YNBX 083-2023 超声波溶液处理反应发生装置

本文件规定了超声波溶液处理反应发生装置的结构、元部件和材料要求、仪器仪表和自动控制要求、技术要求、试验方法、检验规则以及标志、包装、运输、贮存。 本文件适用于化工、冶金、环保、医药等领域进行溶液强化反应和净化反应的超声波溶液处理反应发生装置。

Ultrasonic solution processing reaction generator

JB/T 14248-2022 铝带150mm重剪 技术规范

Technical specification for heavy cutting of aluminum strip to 150mm

JB/T 14251-2022 中厚铝板四辊热轧机 技术规范

Technical specifications for four-roller hot rolling mill for medium-thick aluminum plates

JB/T 14243-2022 热连轧机组 定宽压力机 通用技术规范

General technical specifications for fixed-width presses in hot tandem rolling mills

JB/T 14250-2022 铝带热精轧机 技术规范

Technical Specifications for Hot Finishing Rolling Mills for Aluminum Strips

JB/T 14244-2022 热连轧机组 飞剪减速机

Hot strip rolling mill flying shear reducer