79.020 木材加工技术 标准查询与下载

T/GXLC 002-2019 中密度纤维板

《中密度纤维板》团体标准是在GB/T 11718—2009《中密度纤维板》及GB 18580-2017《室内装饰装修材料 人造板及其制品中甲醛释放限量》、T/CNFPIA 1001-2016《人造板甲醛释放限量》、T/CNFPIA 3002-2018《无醛人造板及其制品》基础上,在确保外观质量、密度及板内密度偏差、含水率、静曲强度、弹性模量、内结合强度、表面结合强度、吸水厚度膨胀率、物理力学性能等技术指标符合国家标准要求的前提下，将甲醛释放限量指标值定得更加严格，并将甲醛释放限量分为无醛级、E0级两个等级，并在标准中增加TVOC的限量值。

Medium density fibreboard

T/GXLC 003-2019 普通胶合板

《普通胶合板》团体标准物理力学性能以GB/T 9846-2015《普通胶合板》为主要依据，甲醛释放量在GB 18580-2017《室内装饰装修材料 人造板及其制品中甲醛释放限量》、T/CNFPIA 1001-2016《人造板甲醛释放限量》、T/CNFPIA 3002-2018《无醛人造板及其制品》、HJ 571-2010《环境标志产品技术要求 人造板及其制品》基础上，在确保外观质量、含水率、胶合强度、静曲强度、弹性模量、浸渍剥离性能等技术指标符合国家标准要求的前提下，将甲醛释放限量指标值定得更加严格，并按甲醛释放限量分为无醛级、E0级两个等级，并在标准中增加TVOC的限量值。

Plywood for general use

T/WJDB 005-2019 浸渍纸层压木质地板

规格尺寸及其偏差、外观质量、理化性能要求、地采暖性能要求

Laminate flooring

T/WJDB 004-2019 实木复合地板

技术要求包括普通实木复合地板、仿古实木复合地板和地采暖用实木复合地板。 内容：外观质量、规格尺寸及其偏差、理化性能、地采暖性能

Engineered wood flooring

T/CTWPDA 06-2019 橡胶木指接拼板

1.适用范围 2.规范性引用文件 3.术语和定义 4.分类与标记 4.1 分类 4.2 规格 4.3 标记 5. 要求 5.1 一般要求 5.2 外观质量与材质指标 5.3 规格及尺寸偏差 5.4 理化性能 6. 试验方法 6.1 试件取样与制取 6.2 实验环境与状态调节 6.3 外观质量及材质指标 6.4 规格及尺寸偏差 6.5 物理力学性能 6.6 环保性能 6.7 防腐性能 6.8 树种名称鉴定 7. 检验规则    7.1 检验分类    7.2 抽样方法与判定规则    7.3 综合判定 8. 标志、包装、运输和贮存    8.1 标志    8.2 包装    8.3 运输和贮存

Finger-jointed board of rubber wood

LY/T 3034-2018 树脂浸渍改性木材生产通用技术要求

General technical requirements for the production of resin impregnated modified wood

ISO 38200:2018 木材和木制品的监管链

This document specifies requirements for a chain of custody (CoC) of wood and wood-based products, cork and lignified materials other than wood, such as bamboo, and their products. NOTE The term “material” will henceforth be used throughout this document to denote “raw materials and products from wood, cork and lignified materials other than wood, such as bamboo”, as defined in 3.8. This document is applicable to material that originates from different categories of input material and can be derived from mechanical, chemical, biological and/or thermal processing or a combination thereof. A chain of custody relies on a control system to track and handle material throughout the entire supply chain or parts of the supply chain, including transportation, receipt, production, sale, resale and output declaration. This document is intended to enable tracking of material from different categories of source to finished products. Furthermore, this document also specifies minimum requirements for input material. This document is not applicable to forest management.

Chain of custody of wood and wood-based products

T/WJDB 002-2018 地采暖用实木踢脚线

包括： 1、范围 2、规范性引用文件 3、术语和定义 4、分类 5、要求 6、检验方法 7、检验规则 8、包装、标志、运输和贮存

Finger-jointed wood washboard for ground with heating system

T/WJDB 001-2018 地采暖用实木地板坯料

包括： 1、范围 2、规范性引用文件 3、术语和定义 4、适用木材 5、要求 6、检验方法 7、检验规则 8、包装、标志、运输和贮存 9、附 录 A （规范性附录） 部分适用树种名称

Blanks for solid wood flooring for ground with heating system

T/WJDB 003-2018 地采暖用实木地板铺装、验收及使用规范

包括： 1、范围 2、规范性引用文件 3、术语和定义 4、铺装要求 5、铺装验收 6、使用规范 7、 保修期内质量要求

Installation, inspection and usage guidelines of solid wood flooring for ground with heating system

DB34/T 3107-2018 高温浸渍处理杨木板材技术要求

本标准规定了高温浸渍处理杨木板材的术语和定义、分类、技术要求、试验方法、检验规则、产品合格证和使用说明书、包装、运输和贮存。 本标准适用于经 160℃～220℃温度软化处理、树脂或其他材料浸渍填充的杨木板材。

Technical requirements for poplar board treated by high temperature impregnation

ASTM D2394-17 木材和木质地板的模拟服务测试的标准测试方法

1.1 These test methods cover procedures for measuring the performance of finish flooring under the following service loadings and conditions: Section Loading Tests Concentrated Loading 7 Floor Surface Indentation from Small Area Loads 12 Falling-Ball Indentation 18 Rolling Load 23 Mechanical Tests Abrasion Resistance 28 Coefficient of Friction 33 Moisture Tests Surface Wetting 38 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring

SN/T 4771-2017 木材及其制品中辛硫磷杀虫剂的测定 液相色谱-质谱法

Determination of phoxim pesticide in wood and its products by liquid chromatography-mass spectrometry

T/CTWPDA 02-2017 负氧离子木地板

标准草案的各章内容包括： 1  范围 对本标准主要内容及其适用范围作出规定。 2  规范性引用文件 3  术语和定义 明确本标准中术语的定义 4  分类 负氧离子地板按照品类、释放来源分类。 5  技术要求   负氧离子地板技术要求包括基本要求、负氧离子性能和放射性限 量、甲醛释放限量。 6  检验方法     负氧离子地板的检测方法包括检测规格尺寸与偏差、外观质量、物理性能、负氧离子性能、 放射性限量试验、甲醛释放量。 7  检验规则 负氧离子地板的检测规则包括检验分类、组批原则、抽样方法和判定原则、综合判断。 8  包装、标志、运输、贮存 本章节规定了负氧离子地板的包装、标志、运输、贮存。

Negative oxygen ion wood flooring

DB37/ 933-2016 纤维板单位产品综合能耗限额

Comprehensive energy consumption quota per unit product of fiberboard

LY/T 2711-2016 单板用竹集成材

Bamboo laminated lumber for veneer

CAN/CSA-O80 Série-2015 木材防腐

1.1 La série de normes CSA O80 prescrit les exigences relatives aux traitements chimiques de préservation (par imprégnation sous pression et à chaud) et d’ignifugation du bois. Elle traite, entre autres sujets, des matériaux, de l’analyse de la matière, des procédures d’imprégnation sous pression et à chaud ainsi que de la fabrication et de l’installation du bois traité en vue de sa mise en service. 1.2 Cette norme présente les ouvrages de référence et les définitions qui s’appliquent à toutes les normes de la série CSA O80. De plus, elle décrit en quoi les normes de la série CSA O80 diffèrent des normes AWPA correspondantes et aborde l’importance de l’enregistrement des produits de préservation. L’annexe A contient des recommandations visant l’utilisation des normes de la série CSA O80 et des normes AWPA correspondantes. Note : Au Canada, l’enregistrement des produits de préservation est effectué par l’Agence de réglementation de la lutte antiparasitaire de Santé Canada. 1.3 Les exigences et les recommandations contenues dans les normes de la série CSA O80 sont basées uniquement sur l’efficacité des produits chimiques en cause. Les normes de la série CSA O80 ne tiennent pas nécessairement compte des lois et des règlements en vigueur. Note : Il incombe aux utilisateurs des normes de la série CSA O80 de s’assurer que l’utilisation qu’ils entendent faire des produits de préservation respecte les lois et des règlements en vigueur. 1.4 Dans cette norme, le terme «doit» indique une exigence, c’est-à-dire une prescription que l’utilisateur doit respecter pour assurer la conformité à la norme ; «devrait» indique une recommandation ou ce qu’il est conseillé mais non obligatoire de faire ; et «peut» indique une possibilité ou ce qu’il est permis de faire. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent à séparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes sont qualifiées de normatives (obligatoires) ou d’informatives (facultatives) pour en préciser l’application.

Wood preservation

DB43/T 1137-2015 炭化竹席

Carbonized bamboo mat

DB34/T 2556-2015 竹木工艺品 扇

本标准规定了竹木工艺品 扇的术语和定义、要求、试验方法、检验规则以及标识、包装、运输和贮存。 本标准适用于企业组织生产的竹木工艺扇，作为原材料采购、指导生产、控制与保证质量依据。

bamboo wood handicraft fan

CAN/CSA-O80 Series-2015 木材防腐

1.1 The CSA O80 Series of Standards specifies requirements related to the preservation and fire retardance of wood through chemical treatment (pressure and thermal impregnation). The subjects covered include materials and their analysis, pressure and thermal impregnation procedures, and fabrication and installation to put treated wood into service. 1.2 This Standard lists reference publications and provides definitions applicable to the entire CSA O80 Series of Standards. This Standard also describes how the CSA O80 Series of Standards differs from related AWPA Standards and addresses the need for preservative registration. Recommendations on the use of the CSA O80 Series of Standards and related AWPA Standards can be found in Annex A. Note: In Canada, preservative registration is carried out through Health Canada’s Pest Management Regulatory Agency. 1.3 The requirements and recommendations of the CSA O80 Series of Standards are based solely on the treatment efficacy of the chemicals in question. The CSA O80 Series of Standards does not necessarily take all laws and regulations into account. Note: It is the responsibility of the users of the CSA O80 Series of Standards to ensure that their use of preservatives does not conflict with applicable laws and regulations. 1.4 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Wood Preservation