79.080 半成品材 标准查询与下载

LY/T 2878-2017 木镶板门

wood paneled door

LY/T 2876-2017 人造板定制衣柜技术规范

Technical Specifications for Customized Wardrobes Made of Artificial Panels

LY/T 2885-2017 竹百叶窗帘

bamboo blinds

LY/T 2877-2017 木夹板门

wooden plywood door

LY/T 2873-2017 铅笔板

pencil board

LY/T 2884-2017 木栅栏

本标准规定了木栅栏的术语和定义、规格尺寸和偏差、材料要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以木材为主要原料，采用榫接或其他连接方式加工而成的木栅栏。

Wooden fences

LY/T 2880-2017 浸渍纸层压定向刨花板地板

Impregnated paper laminated OSB flooring

DIN 68702:2017 木块铺砌

Wood paving

T/FJEA 001-2017 天然沉香分级规范

本标准规定了天然沉香的术语和定义、分级要求、检验方法及标识标志进行要求，适用于通过外观、气味和品位、加热后香味、沉香密度对天然沉香进行分级评定。

Natural agarwood grading specification

ASTM D7032-17 在楼梯踏板防护装置和扶手处建立木塑复合材料和塑料木材甲板板性能等级的标准规范

1.1 This specification covers procedures to establish a performance rating for wood-plastic composite and plastic lumber for use as exterior deck boards, stair treads, guards, and handrails. The purpose of this specification is to establish a basis for code recognition of these products or systems in exterior applications. The products addressed in this specification are considered combustible. NOTE 1—While wood-plastic composites contain wood or other cellulosic materials, the presence of wood or other cellulosic materials in plastic lumber is not required by this specification. Due to non-wood materials in wood-plastic composites and plastic lumber the structural, physical, fire, and other attributes may not be similar to those of wood. 1.1.1 The plastic component of wood-plastic composites and plastic lumber covered by this specification shall consist primarily of thermoplastics. 1.2 Deck boards, stair treads, guards, and handrails covered by this specification are permitted to be of any code compliant shape and thickness (solid or non-solid). 1.3 Wood-plastic composites and plastic lumber are produced in a broad range of fiber and/or resin formulations. It is recognized that the performance requirements in this specification are valid for any material or combination of materials used as deck boards, stair treads, guards, or handrails. 1.4 Details of manufacturing processes are beyond the scope of this specification. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. 1.7 Table of Contents: Section Scope 1 Referenced Documents 2 Terminology 3 General Requirements 4 Sampling 4.1 Sample Size 4.2 Conditioning 4.3 Flexural Tests 4.4 Temperature and Moisture Effects 4.5 Ultraviolet (UV) Resistance Test 4.6 Freeze-Thaw Resistance Test 4.7 Biodeterioration Tests 4.8 Fire Performance Tests 4.9 Deck Board Performance Requirements 5 General 5.1 Flexural Performance Tests 5.2 Determination of the Unadjusted Allowable Load 5.3 Creep-Recovery Test 5.4 Mechanical Fastener Holding Tests 5.5 Slip Resistance Test 5.6 Guard and Handrail Performance Requirements 6 General 6.1 Guardrail System Test Requirements 6.2 Oneand Two-Family Dwelling Requirements 6.2.1.1 Handrail Test Requirements (Concentrated Load) 6.3 Report 7 Independent Inspection 8 Manufacturing Standard 9 Precision and Bias 10 Keywords 11 Two-Span Test Method Annex A1 Commentary Appendix X1 1 This specification is under the jurisdiction of ASTM Committee D07 on Wood and is the direct responsibility of Subcommittee D07.02 on Lumber and Engineered Wood Products. Current edition approved March 1, 2017. Published April 2017. Originally approved in 2004. Last previous edition approved in 2015 as D7032 – 15. DOI: 10.1520/D7032-17. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails

BS EN 14354:2017 人造板 木饰面地板覆盖物

Wood-based panels. Wood veneer floor coverings

ASTM D8023-17 木材建造用圆木销钉(钉)

1.1 This specification covers standardizing the dimensions and materials for the manufacture of round wood dowels (pegs) used in the fabrication of connections in wood construction. The referencing of this specification in design, construction, and purchase order documents is intended to provide some assurance that the round wood dowels to be used in an assembly meet minimum materials quality standards and that dimensions for fabrication and finish can be relied on to ensure connection performance. This specification provides regulatory agencies with a set of standards by which to judge the acceptability of round wood dowels encountered in the field and in fabricators’ shops. 1.2 This specification only addresses the standardization and manufacture of round wood dowels. Other types of wood dowels, such as sawn or cleaved pegs, are outside the scope of this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values in parentheses are for information only. 1.4 Safety Hazards—There are no known hazards with the use of this specification. The products manufactured to this specification should not be brittle or difficult to install with proper tools. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction

GSO ISO 5326:2016 实木铺路块 硬木铺路块 质量要求

1.1 This International Standard lays down the quality requirements for solid hardwood paving blocks, used for paving covered (indoor) and open (outdoor) spaces. 1.2 Paving blocks made of Fagus sylvatica wood are intended for use only in covered spaces.

Solid wood paving blocks -- Hardwood paving blocks -- Quality requirements

GSO ISO 5327:2016 实木铺路砖 一般特性

This International Standard specifies the manufacturing characteristics, the shapes and the dimensions, the tolerances, and the inspection and delivery conditions of solid wood paving blocks used for paving covered (indoor) and open (outdoor) spaces. The classification of paving blocks according to specific characteristics and wood defects, as well as the possible exceptions, is established in separate International Standards referring to the classification of each wood species or of each group of species.

Solid wood paving blocks -- General characteristics

GSO ISO 2036:2016 制造木地板的木材 按物种标记的符号

This International Standard specifies a marking system for wood, according to the species, utilized in the manufacture of wood floorings.

Wood for manufacture of wood flooring -- Symbols for marking according to species

GSO ISO 5333:2016 针叶木原木实木复合地板块 冷杉和云杉实木复合地板块的分类

This International Standard establishes the classification, by quality, of raw parquet blocks of : — fir (Abies sp.), — spruce (Picea sp.), intended for the manufacture of strips for different types of parquet floorings.

Coniferous wood raw parquet blocks -- Classification of fir and spruce parquet blocks

GSO ISO 5334:2016 实木复合地板 海松条材的分类

This International Standard establishes the classification, by quality, of non-assembled solid maritime pine parquet strips.

Solid wood parquet -- Classification of maritime pine strips

GSO ISO 5328:2016 实木铺路块 软木铺路块 质量要求

This International Standard lays down the quality requirements for solid softwood paving blocks used for paving covered (indoor) and open (outdoor) spaces.

Solid wood paving blocks -- Softwood paving blocks -- Quality requirements

KS F 2154-2016 轻型木结构剪力墙抗剪（扭）力试验方法

Method of shear(racking) resistance test for light-frame wood shear walls

T/ZZB 0079-2016 重组竹地板

本标准规定了重组竹地板的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、产品标志、包装、运输和贮存及质量承诺等。 本标准适用于以竹束为原料制成的室内用重组竹地板。

Bamboo scrimber flooring