79.080 半成品材 标准查询与下载

LY/T 1987-2020 木质踢脚线

Wooden baseboards

LY/T 3232-2020 框架式实木复合地板

Frame solid wood composite flooring

LY/T 3233-2020 地采暖用木质地板甲醛释放承载量规范

Specification for formaldehyde release capacity of wooden floors used for floor heating

LY/T 3231-2020 室内木制品用水性紫外光固化涂料

Water-based UV-curable coatings for interior wood products

ASTM F2075-20 工程木纤维用作游乐场附近和周围游乐场安全表面的标准规范

1.1 This specification establishes minimum characteristics for those factors that determine particle size, consistency, purity, and ability to drain. 1.2 Engineered wood fiber that meets the requirements of this specification must comply with Specification F1292, if the surface is in the use zone as defined in Specification F1487. 1.3 A sample of wood fiber that meets the requirements of this specification may be designated engineered wood fiber and be suitable for playground safety surfacing. 1.4 This specification does not imply that an injury cannot be incurred if the engineered wood fiber complies with this specification. 1.5 To meet the requirements of this specification, the material shall perform as follows: 1.5.1 The material shall meet particle size requirements. 1.5.2 The material shall meet the requirement for metal particles. 1.5.3 The material shall meet the allowable heavy metal concentrations considered hazardous to children. 1.5.4 The material shall meet the requirements of Specification F1292. 1.6 The values stated in inch-pound units are to be regarded as standard. The values in parentheses are mathematical conversions. SI units, which are provided for information, are not considered the standard, except in 8.4. 1.7 Warning—Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury-containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website (http://www.epa.gov/mercury/faq.htm) for additional information. Users should be aware that selling mercury or mercurycontaining products, or both, in your state may be prohibited by state law. 1.8 The following precautionary statement pertains to the test method portions only, in 7.4, 8.4, and 9.4 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This specification is under the jurisdiction of ASTM Committee F08 on Sports Equipment, Playing Surfaces, and Facilities and is the direct responsibility of Subcommittee F08.63 on Playground Surfacing Systems. Current edition approved Dec. 1, 2020. Published January 2021. Originally approved in 2001. Last previous edition approved in 2015 as F2075 – 15. DOI: 10.1520/F2075-20. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment

T/ZZB 1942-2020 实木砧板

本文件规定了实木砧板的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标识、包装、运输和贮存及质量承诺。 本文件适用于实木砧板（以下简称砧板）。

Solid wood chopping board

T/ZZB 1897-2020 浸渍纸层压实木复合地板

本文件规定了浸渍纸层压实木复合地板的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标识、包装、运输与贮存、质量承诺。 本文件适用于浸渍纸层压实木复合地板的生产销售。

Laminate engineered wood flooring 2020

PN-EN 14915+A2-2020-06 D 实木镶板和包层 特性、要求和标志

Solid wood panelling and cladding -- Characteristics, requirements and marking

T/JQEA 002-2020 数码喷印软木类地板

本文件规定了数码喷印装饰软木地板的术语和定义、分类、要求、检验方法、检验规则以及标志、包装、运输和贮存等。

Digital inkjet printing cork floor

T/WJDB 006-2020 定制木质门

外观质量、尺寸偏差、理化性能

custom wooden doors

T/WJDB 007-2020 定制木质门安装、验收、使用和售后服务规范

安装规范（施工前准备、核对产品、安装技术要求）、验收规范（验收时间、验收要求、验收后确认）、使用规范、售后服务规范

Custom wooden door installation, acceptance, use and after-sales service specifications

ASTM D6958-20 评估木器涂料侧粘结电位的标准试验方法

1.1 These test methods describe an evaluation procedure for the determination of undesirable side-bonding of coatings for wood flooring. They provide two mechanical properties tests for the quantitative determination of the cohesive strength of wood coatings (tensile and lap shear). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings

T/JSQA 037-2020 浸渍纸层压木质地板

       本标准规定了浸渍纸层压木质地板的术语和定义、分类、要求、检验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于浸渍纸层压木质地板。

Laminate floor covering

T/SPEMF 0007-2020 实木地板

1　范围 2　规范性引用文件 3　术语和定义 4　分类 5　要求 5.1　等级 5.2　规格尺寸与其偏差 5.3　外观质量 5.4　理化性能 5.5　有害物质限量 5.6　木材名称 6　检验方法 6.1　规格尺寸与偏差的检测 6.2　外观质量的检测 6.3　理化性能的检测 6.4　有害物质的检测 6.5　木材名称的检测 7　检验规则 8　包装、标志、运输和贮存

Solid wood flooring

T/CSUS 03-2020 石木塑地板应用技术标准

1.0.1 为提高石木塑地板设计、施工及验收的技术水平，做到安全适用、技术先进、经济合理、确保质量，特制定本标准。 1.0.2 本标准适用于民用建筑室内石木塑地板的材料、设计、施工、质量验收。 1.0.3 石木塑地板的材料、设计、施工、质量验收除应符合本标准外，尚应符合国家现行有关标准的规定。

Technical standard for application of stone-wood-polymer composite flooring

LY/T 1859-2020 仿古木质地板

Antique wooden floor

T/CTWPDA 10-2020 特色仿古木质地板

1 范围 2 规范性引用文件 3 术语和定义 4 分类 4.1 按产品品类分 4.2 按表面形态分 4.3 按表面装饰方法分 5 要求 5.1 规格尺寸和尺寸偏差 5.2 外观质量 5.3 理化性能 6 检验方法 6.1 规格尺寸 6.2 外观质量 6.3 理化性能 7 检验规则 7.1 检验类别 7.2 组批原则 7.3 抽样与判定 7.4 综合判断 7.5 检验报告 8 标志、包装、运输和贮存 8.1 标志 8.2 包装 8.3 运输和贮存 附录 A（规范性附录） 特色仿古木质地板铺装、验收和使用规范及保修期内质量要求 附录 B（资料性附录） 特色仿古木质地板甲醛释放量出厂检验要求

Special antique style flooring

LY/T 3192-2020 内置电热层电采暖木质地板

Built-in electric heating layer electric heating wooden floor

BS EN 1534:2020 木地板和镶木地板 抗压痕性的测定 测试方法

What is BS EN 1534 about?   BS EN 1534 specifies a method, derived from the test, for determining the resistance to   indentation of wood flooring.     Note: The test shall be carried out on test specimens that may be elements or square test pieces, cut from elements that preferably have sides approximately 50 mm long.  Who is BS EN 1534 for?    BS EN 1534 on wood flooring and parquet is beneficial for:

Wood flooring and parquet. Determination of resistance to indentation. Test method

T/ZZB 1320-2019 人造板定制衣柜

本标准规定了人造板定制衣柜的术语和定义、产品分类、基本要求、技术要求、检验与验收方法、标志、包装、贮存和运输及质量承诺。 本标准适用于人造板定制衣柜的制作、安装和验收。

Customized wardrobe with wood-based panels