81.060.30 高级陶瓷 标准查询与下载
共找到 1685 条与 高级陶瓷 相关的标准，共 113 页
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment —Part 2: Remova
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment —Part 5: Remova
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment —Part 4: Remova
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials — Part 3: Removal of toluene
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials — Part 3: Removal of toluene
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment —Part 1: Remova
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials — Part 2: Removal of acetaldehyde
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-30
- 实施
Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
- ICS
- 81.060.30
- CCS
- 发布
- 2020-12-08
- 实施
- 2020-12-08
This document specifies a method for use of a gonio-spectrofluorometer to measure internal quantum efficiency, external quantum efficiency, absorptance, luminescent radiance factor and relative fluorescence spectrum of ceramic phosphor powders which are used in white light-emitting diodes (LEDs) and emit visible light when excited by UV or blue light.
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
- ICS
- 81.060.30
- CCS
- 发布
- 2020-11-00
- 实施
What is ISO 22278 about? ISO 22278 specifies the test method for measuring the crystalline quality of single-crystal thin film (wafer) using the XRD method with a parallel X-ray beam. ISO 22278 applies to all of the single-crystal thin film (wafer) as bulk or epitaxial layer structure. Who is ISO 22278 for? ISO 22278 on crystalline quality of the single-crystal thin film is useful for: Ceramic manufacturers Mechanical engineers
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for crystalline quality of single-crystal thin film (wafer) using XRD method with parallel X-ray beam
- ICS
- 81.060.30
- CCS
- 发布
- 2020-08-31
- 实施
- 2020-08-31
This document specifies the test method for measuring the crystalline quality of single-crystal thin film (wafer) using the XRD method with parallel X-ray beam. This document is applicable to all of the single-crystal thin film (wafer) as bulk or epitaxial layer structure.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for crystalline quality of single-crystal thin film (wafer) using XRD method with parallel X-ray beam
- ICS
- 81.060.30
- CCS
- 发布
- 2020-08-24
- 实施
抗温度变化性能:95 ℃保温1 h，投入-2 ℃~2 ℃煤油，保持10 min取出，恢复室温后，样品无裂纹；-55 ℃保温1 h，转入69 ℃~73 ℃煤油中，保持10 min取出，恢复室温后，产品无裂纹。 指标说明：产品使用环境可能发生变化，为保证产品正常使用，防止急冷急热造成的产品损坏。特增加抗温度变化能力。
Magnesia-alumina spinel transparent ceramics
- ICS
- 81.060.30
- CCS
- C307
- 发布
- 2020-08-14
- 实施
- 2020-08-21
本标准规定了氧化铝流延陶瓷基片绿色设计产品的评价要求、生命周期评价报告编制方法和评价方法等。
Technical specification for green-design product assessment- Alumina ceramic substrate by tape casting
- ICS
- 81.060.30
- CCS
- C307
- 发布
- 2020-07-29
- 实施
- 2020-08-03
本标准规定了新能源汽车用陶瓷密封环绿色设计产品的评价要求、生命周期评价报告编制方法和评价方法等。
Technical specification for green-design product assessment- Ceramic sealing ring for new energy vehicles
- ICS
- 81.060.30
- CCS
- C307
- 发布
- 2020-07-29
- 实施
- 2020-08-03
This document specifies the conditions for the determination of the distribution of strength and rupture strain of ceramic filaments within a multifilament tow at room temperature by performing a tensile test on a multifilament tow. This document applies to dry tows of continuous ceramic filaments that are assumed to act freely and independently under loading and exhibit linear elastic behaviour up to failure. The outputs of this method are not to be mixed up with the strengths of embedded tows determined by using ISO 240461).
Fine ceramics (advanced ceramics, advanced technical ceramics) — Reinforcement of ceramic composites — Determination of distribution of tensile strength and tensile strain to failure of filaments with
- ICS
- 81.060.30
- CCS
- 发布
- 2020-06-10
- 实施
What is ISO 23458 about? ISO 23458 discusses standards for CVD ceramic coatings. ISO 23458 specifies a test method for determining thermal expansion coefficient up to 2 300 K and the residual stress of chemical vapour deposition (CVD) ceramic coatings (thickness > 0,03 mm) at room temperature. Procedures for test piece preparation, test modes, heat rate, data collection, property calculations and reporting procedures are given. ISO 23458 applies to CVD ceramic coatings on metal or ceramic substrates. This test method can be used for material research, quality control, characterization and design data-generation purposes. Who is ISO 23458 for?
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining thermal expansion coefficient and residual stress of CVD ceramic coatings
- ICS
- 81.060.30
- CCS
- 发布
- 2020-05-31
- 实施
- 2020-05-31
This document specifies a test method for determining thermal expansion coefficient up to 2300 K and the residual stress of chemical vapour deposition (CVD) ceramic coatings (thickness > 0,03 mm) at room temperature. Procedures for test piece preparation, test modes, heat rate, data collection, property calculations and reporting procedures are given. This document applies to CVD ceramic coatings on metal or ceramic substrates. This test method can be used for material research, quality control, characterization and design data-generation purposes.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining thermal expansion coefficient and residual stress of CVD ceramic coatings
- ICS
- 81.060.30
- CCS
- 发布
- 2020-05-12
- 实施
What is ISO 21712 about? ISO 21712 specifies a test method for determining the flexural bond strength of ceramic/ceramic joints or ceramic/metal joints at room temperature. The substrate materials, for example ceramic or metal, are both monolithic. This method can be used to test the interfacial bond strength of the joint under bending conditions. It can be used for the development of joining materials and/or for the quality control of joints, the characterization and generating design data purposes. Who is ISO 21712 for? ISO 21712 on test method for flexural bond strength of ceramics is relevant to:
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural bond strength of ceramics
- ICS
- 81.060.30
- CCS
- 发布
- 2020-04-30
- 实施
- 2020-04-30
