共找到 2394 条与 粘合剂和胶粘产品 相关的标准,共 160 页
本标准规定了木材胶粘剂用树脂游离苯酚含量测定法。 本标准适用于木材工业中酚醛树脂游离苯酚含量的测定。
Test methods for wood adhesives and their resins - Determination of free phenol content
本标准规定了酚醛树脂的聚合时间测定法。聚合时间系指在规定温度下,树脂达到B状态的时间,以表示其固化速度。 本标准适用于木材工业中醇溶性酚醛树脂(脱水后树脂)。
Test methods for wood adhesives and their resins - Determination of polymerization time
本标准规定了木材胶粘剂用树脂含水率测定法。 本标准适用于木材工业中醇溶性酚醛树脂(脱水后树脂)含水率的测定。
Test methods for wood adhesives and their resins - Determination of moisture content
本标准规定了木材胶粘剂用树脂胶合强度测定法。 本标准适用于木材胶粘剂用冷固型脲醛树脂胶合强度的测定。
Test methods for wood adhesives and their resins - Determination of wood bonding strength
本标准规定了木材胶粘剂用树脂贮存稳定性测定法。 本标准适用于木材胶粘剂用树脂(酚醛及脲醛树脂)贮存稳定性的测定。
Test methods for wood adhesives and their resins - Determination of storage stability
本标准规定了木材胶粘剂用树脂适用期测定法。 本标准适用于木材胶粘剂用脲醛树脂适用期的测定。
Test methods for wood adhesives and their resins - Determination of pot life
本标准规定了木材胶粘剂用树脂固化时间的测定法。 本标准适用于木材胶粘剂用脲醛树脂固化时间的测定。
Test methods for wood adhesives and their resins - Determination of curing time
本标准规定了木材胶粘剂用树脂水混合性测定法。 本标准适用于木材工业中液体胶粘剂用树脂(水溶性酚醛、脲醛树脂)的水混和性测定。
Test methods for wood adhesives and their resins - Determination of water miscibility
本标准规定了木材胶粘剂及其树脂固体含量测定法。 本标准适用于木材工业中液体胶粘剂及树脂(酚醛、脲醛及三聚氰胺甲醛树脂)固体含量的测定。
Test methods for wood adhesives and their resins - Determination of solid content
本标准规定了木材胶粘剂及树脂的pH值测定方法。 本标准适用于木材工业中液体胶粘剂及树脂(酚醛、脲醛及三聚氰胺甲醛树脂)pH值的测定。
Test methods for wood adhesives and their resins pH determination
本标准规定了木材胶粘剂及其树脂粘度测定法。 本标准适用于木材工业中液体胶粘剂及树脂(酚醛、脲醛及三聚氰胺甲醛树脂)粘度的测定。
Wood adhesives and their resins test method viscometry
本标准规定了木材胶粘剂用树脂密度测定法。 本标准适用于木材胶粘剂用树脂(酚醛、脲醛及三聚氰胺甲醛树脂)密度的测定。
Densitometry method for wood adhesives and their resins
本标准规定了各种类型胶粘剂耐化学试剂的测试方法。该方法利用胶粘剂胶接的金属试样在一定的试验液体中、一定温度下浸泡规定时间后粘接强度的降低衡量胶粘剂的耐化学试剂性能。 本标准适用于各种类型胶粘剂。
Test method for resistance of adhesive bonds to chemical reagents—Metal to metal
本标准规定了用37.00mL的重量杯测定液态胶粘剂及其组分密度的方法。 本标准适用于液态胶粘剂密度的测定,特别适用于粘度较高或组分的挥发性较大,不宜用比重瓶法测定密度的液态胶粘剂。
Test method for density of adhesives in fluid from.Method of weight cup
本标准规定了铸造用合脂粘结剂的牌号、技术要求、试验方法和检验规则。 本标准适用于以石蜡为原料制取合成脂肪酸过程中的蒸馏后残渣(副产品)并以适量溶剂稀释配成的铸造砂芯用合脂粘结剂。
The residue from distrition of synthe4ic fatty acids as binder for foundry
本标准规定了无机胶粘剂套接压缩剪切强度试验中的试件结构和尺寸、试样制备方法、试验环境条件、试验步骤及试验结果的计算方法。 本标准适用于对同种或异种金属材质的无机胶粘剂套接压缩剪切强度的测定。
Testing method for compressive shear strength of dowel joint by inorganic adhesives
本标准适用于测试在温度、拉伸剪切应力和时间的综合影响下,胶接金属与金属用的胶粘剂的蠕变性能。 本标准适用的温度范围是室温至250℃。
The method of creep properties of adhesive in shear by tension loading (metal to metal)
本标准规定了在室温下测定胶粘剂的金属对金属胶接的劈裂强度试验方法。本标准适用于规定条件下制备、测试的标准试样。
Test method of cleavage strength of adhesive (metal to metal)
本标准规定了在室温下金属对金属搭接的胶粘剂拉伸剪切强度测定方法。本标准适用于规定条件下制备、测试的标准试样。 本标准等效采用ISO4587-1979《胶粘剂--高强度胶粘剂拉伸搭接剪切强度的测定》。
The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
本文件规定了车门防水用丁基密封胶的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于汽车门防水用的丁基密封胶(以下简称“密封胶”)。
Butyl sealant for car door waterproofing
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号