91.180 内部装修 标准查询与下载

IEC 60335-2-78:2021 家用和类似用途电器的安全第2-78部分:户外烧烤的特殊要求

Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues

T/SDCA 015-2021 泰山品质 被动式低能耗建筑用铝合金门窗

“泰山品质”认证是山东省运用认证手段培育符合“品质卓越、自主创新、管理先进、品牌高端、标准领先、绿色发展”要求的质量品牌，加快山东省产品、服务品牌高端化、企业国际化、产品服务卓越化步伐，助力山东经济高质量发展的一项质量提升工程。 为推动被动式低能耗建筑用铝合金门窗产品在“泰山品质”认证中的应用，提升该类产品的产品质量标准，同时贯彻国家有关节约能源、保护环境的法律法规和政策，实施可持续发展战略，进一步降低民用建筑能耗和改善室内环境，根据国家标准《铝合金门窗》GB/T 8478-2020 中规定的保温型门窗的基础上，经过广泛深入调查研究，认证总结经验，制定本文件。 本文件适用于被动式低能耗建筑用铝合金门窗产品的“泰山品质”认证。 本文件主要技术内容包括：1.范围；2.规范性引用文件；3.术语和定义；4.分类和标记；5.要求；6.试验和方法；7.检验规则；8.产品标志及随性文件；9.包装、运输和存储；10.附录。

Taishan Quality - Aluminum windows and doors for energy efficiency of passive ultra-low buildings

ASTM F2678-16(2021) 制备面板垫层、厚浇注石膏混凝土垫层、厚浇注轻质多孔混凝土垫层和带有垫层修补化合物的混凝土底层地板以铺设弹性地板的标准实施规程

1.1 This practice includes recommendations for preparing and smoothing panel underlayments, gypsum concrete and concrete subfloors with patching compounds upon which resilient flooring may be installed. 1.2 This practice does not cover the adequacy of the subfloor assembly to perform its structural requirements, which is governed by local building codes. 1.3 This practice does not supersede in any manner the resilient flooring, underlayment or adhesive manufacturer’s written instructions. Consult the individual resilient flooring, underlayment or adhesive manufacturer for specific recommendations. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patc

ASTM F2419-11(2021) 厚浇注石膏混凝土垫层安装和弹性地板表面处理的标准实施规程

1.1 This practice covers the installation and preparation of the thick poured gypsum concrete underlayments over wood structural panel subfloors in commercial structures or over concrete floors in commercial structures and the preparation of the thick poured gypsum concrete underlayment surface prior to the installation of resilient flooring in commercial buildings. 1.2 This practice covers the factors that are required to be controlled while installing thick poured gypsum concrete underlayment as a base for resilient flooring. 1.3 This practice does not cover the structural adequacy of the wood structural panel subfloor or concrete subfloor. The structural integrity of assemblies is governed by local building codes. 1.4 This practice does not supersede in any manner the thick poured gypsum concrete underlayment manufacturers, adhesive manufacturer’s or resilient flooring manufacturer’s written instructions. Consult the individual manufacturer for specific recommendations. 1.5 Thick poured gypsum concrete underlayments are not suitable for use on concrete slabs on ground due to potential moisture problems arising from moisture intrusion, unless an adequate vapor retarder or vapor barrier is present directly beneath the concrete subfloor. 1.6 The values stated in inch-pound units are to be regarded as standard. The values stated in parentheses are approximate mathematical conversions to SI units, which are provided for information only. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring

T/NAHIEM 35-2021 医疗机构建筑装配式室内装修工程技术标准

医疗建筑的装配式室内装修工程设计应与建筑设计协同进行，并应与机电系统、软装和医疗设备安装等专业相协调。宜与室内标识导向系统、智能化系统等进行一体化设计，装配式装修设计采用建筑信息模型(BIM)技术，并应符合现行国家标准《建筑信息模型应用统一标准》GB/T51212相关要求。

construction standard for fabricated interior design for medical institutions

KS F 2602-2021 地板滑爽性测试方法（摆式）

Method of test for floor slipperiness(Pendulum type)

DB51/T 2825-2021 放心舒心消费服务规范 第1部分：家装行业

本文件规定了家庭住宅装饰装修（以下简称“家装”）行业放心舒心消费服务的原则、基本要求、服务内容、消费维权、消费服务评价等内容。 本文件适用于四川省行政区域范围内家装行业经营者和消费者之间的放心舒心消费服务。

Rest assured and comfortable consumer service specification part 1: home improvement industry

T/ZBDIA 0002-2021 家庭居室装饰装修服务规范

本文件规定了家庭居室装饰装修服务的基本规定、咨询、设计、预算报价及合同签订、施工组织、质量验收、工程结算与交付、工程保修、投诉及争议处理等内容。

Specification for home room decoration and renovation service

T/ZS 0210-2021 居住建筑室内装配式装修技术规程

1  总  则　 2  术  语　 3  基本规定　 4  设  计　  4.1  一般规定　  4.2  隔墙与墙面　  4.3  吊顶  4.4  楼地面　  4.5  厨房  4.6  卫生间　  4.7  内门窗与细部工程　  4.8  设备管线与智能家居　  4.9  收纳与家具　 5  生  产　  5.1  一般规定  5.2  生产与检验　  5.3  编码与包装　  5.4  运输与存放 6  施  工　  6.1  一般规定　  6.2  施工准备　  6.3  施工安装　  6.4  成品保护　 7  质量验收　  7.1  一般规定　  7.2  验收要求　  7.3  工程资料　 8  使用维护　  8.1  一般规定　  8.2  使用与维护　

Technical specification for interior assembled decoration of residential buildings

T/SDAB 001-2021 住宅室内装饰装修服务规范

  本文件规定了住宅室内装饰装修服务活动，包括基本要求，禁止行为，设计服务，工程报价，示范合同，施工管理，物料管理，工程验收，质量保证，投诉调处和诚信建设，涵盖了住宅室内装饰装修全过程。

Residential interior decoration service specification

T/ZZXJX 022-2021 公共建筑全装修应用技术标准

前  言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 基本规定　 5 工程材料　   5.1 一般规定　   5.2 内装部品体系　   5.3 厕浴间部品体系　   5.4 设备部品体系　   5.5 细部工程　 6 施工　   6.1 一般规定　   6.2 施工准备　   6.3 内装部品体系　   6.4 厕浴间部品体系　   6.5 设备部品体系　   6.6 细部工程　 7 质量验收　   7.1 一般规定　   7.2 室内环境　   7.3 防火安全　   7.4 装配式装修　   7.5 全装修工程　

Application technical standard for full decoration of public buildings

T/CBDA 53-2021 建筑装饰装修工程维修与保养标准

主要技术内容是：1 总则；2 术语；3 基本规定；4合同与档案；5 维修；6保养。

Standards for repair and maintenance of building decoration engineering

T/CECS 856-2021 公共机构食堂灶具节能和油烟净化改造技术规程

主要技术内容包括：总则、术语、技术要求、施工及调试、竣工验收、运行管理与维护、改造工程综合评估等。

Technical regulations for energy saving and oil fume purification renovation of canteen stoves in public institutions

T/FIDA 002-2021 室内设计规范

前言 1　范围　 2　规范性引用文件　 3　术语和定义　 4　设计要求　 5　空间要求　 6　配套设施要求　 7　质量要求　 附录A（资料性附录）　家庭居室装饰装修工程设计协议书（样稿）　

interior design specification

T/FIDA 001-2021 住宅装饰装修服务规范

住宅装饰装修服务规范 前言　 1　范围　 2　规范性引用文件　 3　术语和定义　 4　基本规定　 5　咨询服务　 6　设计服务　 7　预算报价及合同签订　 8　施工组织及验收　 9　售后服务　 附录A（资料性附录）　住宅装饰装修合同文本（样稿）　

Specifications for residential decoration services

T/GIDA 003-2021 室内装饰验收规范

本文件规定了室内装饰装修中的基本规定和石工、管道、洁具、电气、防水、砌墙抹灰、镶贴、吊 顶、轻质隔墙、门窗、细部、油漆、涂料、裱糊等项工程及室内空气的质量要求和检验方法、质量验收 及判定。

Acceptance Specifications for Interior Decoration

T/GIDA 002-2021 室内装饰施工规范

本文件规定了室内装饰施工的术语和定义、基本要求、防火安全、防水工程、抹灰工程、吊顶工程、 涂饰工程、地面铺装工程、卫生器具及管道安装工程、水电安装工程。

Specifications for interior decoration construction

T/CBMCA 019-2021 医用洁净室装饰材料技术标准

1、范围；2、规范性引用文件；3、术语和定义；4、材料分类；5、要求；6、试验方法。

Technical standard for medical clean room decoration materials

PN-EN 266-2021-02 E 卷筒状墙面覆盖物 纺织墙面覆盖物规范

Wall coverings in roll form -- Specification for textile wall coverings

DB21/T 3361-2021 室内装饰装修保养与维修工程技术规程

Technical regulations for interior decoration maintenance and repair engineering