93.025 外部输水系统 标准查询与下载

ANSI/AWWA C226-2013 水务用尺寸1/2至72英寸(13至1800 mm)的不锈钢配件

Stainless-Steel Fittings for Waterworks Service, Sizes 1/2 In. Through 72 In. (13 mm Through 1,800 mm)

DB23/T 1491-2012 地下水源热泵技术规程

Groundwater source heat pump technical specification

DIN 1988-200:2012 饮水装置实用规程. 第200部分: 安装类型A(封闭系统). 计划, 部件, 器械, 材料; DVGW实用规程

Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice

DIN 1988-100:2011 饮用水设施的实施规程.第100部分:饮用水保护,饮用水质量监控;DVGW惯例

Codes of practice for drinking water installations - Part 100: Protection of drinking water, drinking water quality control; DVGW code of practice

ASTM F1962-11 使用最大水平定向钻孔放置聚乙烯管道或管道在障碍物（包括河道）的标准指南

1.1 This guide describes the design, selection considerations, and installation procedures for the placement of polyethylene pipe or conduit below ground using maxi-horizontal directional drilling equipment. The pipes or conduits may be used for various applications including telecommunications, electric power, natural gas, petroleum, water lines, sewer lines, or other fluid transport. 1.2 Horizontal directional drilling is a form of trenchless technology. The equipment and procedures are intended to minimize surface damage, restoration requirements, and disruption of vehicular or maritime traffic with little or no interruption of other existing lines or services. Mini-horizontal directional drilling (min-HDD) is typically used for the relatively shorter distances and smaller diameter pipes associated with local utility distribution lines. In comparison, maxi-horizontal directional drilling (maxi-HDD) is typically used for longer distances and larger diameter pipes common in major river crossings. Applications that are intermediate to the mini-HDD or maxi-HDD categories may utilize appropriate “medi” equipment of intermediate size and capabilities. In such cases, the design guidelines and installation practices would follow those described for the mini- or maxi-HDD categories, as judged to be most suitable for each situation. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of the regulatory limitations prior to use. Section 6 contains general safety information related to the use of maxi-horizontal directional drilling equipment.

Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings (Withdrawn 2020)

DS/EN 488:2011 区域供热管道 直埋热水管网的预绝缘粘合管道系统 用于钢制服务管道、聚氨酯绝热材料和聚乙烯外壳的钢制阀门组件

This European Standard specifies requirements and test methods for valves of prefabricated thermally insulated valve assemblies comprising a steel valve, rigid polyurethane foam insulation and an outer casing of polyethylene for use in directly buried hot water networks with pre-insulated pipe assemblies in accordance with EN 253.This European Standard applies only to insulated valve assemblies for continuous operation with hot water at various temperatures in accordance with EN 253:2009, Clause 1 and the valve assemblies with a maximum operation pressure of 25 bar. For higher pressures, additional demands apply.Guidelines for quality inspection are given i

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

ANSI/AWWA C224-2011 钢制水管,连接器,配件和特殊部件的内部和外部用尼龙11基聚酰胺涂层系统

This standard describes Nylon-11-based polyamide coating systems for interior and exterior of steel pipe, connections, fittings, and special sections (articles) that are used in water-handling equipment that is installed aboveground, belowground, or underwater.

Nylon-11-Based Polyamide Coating System for the Interior and Exterior of Steel Water Pipe, Connections, Fittings, and Special Sections

ANSI/AWWA C115/A21.15-2011 带延性铁或灰口铸铁螺纹法兰的法兰延性铁管

This standard describes 3-in. through 64-in. (80 mm through 1600 mm) flanged ductile-iron pipe with ductile-iron or gray-iron threaded flanges for potable water, wastewater, and reclaimed water service.

Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges

DS/EN 15632-3:2010 区域供热管道 预绝缘柔性管道系统 第3部分：带塑料服务管道的非粘合系统；要求和测试方法

This European Standard provides requirements and test methods for flexible, pre-insulated, direct buried district heating pipes with plastic service pipes and no bonding between the layers of the pipes.This European Standard is valid for maximum operating temperatures of 95 °C and maximum operating pressures up to 10 bar for a design lifetime of at least 30 years.This European Standard does not cover surveillance systems.NOTE For higher temperatures or for the transport of other fluids, for example potable water, additional requirements and testing is needed. Such requirements are not specified in this European Standard.

District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods

DS/EN 15632-2:2010 区域供热管道 预绝缘柔性管道系统 第2部分：粘合塑料服务管道 要求和测试方法

This European Standard provides requirements and test methods for flexible, pre-insulated, directly buried heating pipes with plastics service pipes and bonding between the layers of the pipes.This European Standard is valid for maximum operating temperatures of 95 °C and maximum operating pressures up to 10 bar for a design lifetime of at least 30 years.This European Standard does not cover surveillance systems.NOTE For higher temperatures or for the transport of other fluids, for example potable water, additional requirements and testing is needed. Such requirements are not specified in this European Standard.

District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods

CAN/CSA-Z24512-2010 与饮用水和废水服务相关的活动 饮用水公用事业管理和饮用水服务评估指南（第一版）

Activities relating to drinking water and wastewater services - Guidelines for the management of drinking water utilities and for the assessment of drinking water services (First Edition)

DS/EN 489:2009 区域供热管道 直埋热水网络的预绝缘粘合管道系统 钢制服务管道、聚氨酯绝热材料和聚乙烯外壳的接头组件

This European Standard specifies requirements for joints made under field conditions between adjacent preinsulated pipes and/or fittings in district heating networks. The specified general requirements are also valid for field-made T branches, bends, reducers, caps, etc.This European Standard covers jointing of steel service pipes by means of fusion welding, the connecting of casing ends with joint casings and the thermal insulation with poured rigid PUR foam or prefabricated PUR-foam insulation.This European Standard specifies methods for type tests of complete joints and PUR-foam for joints under laboratory conditions.The requirements of this European Sta

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

DS/EN 14419:2009 区域供热管道 用于直埋热水网络的预绝缘粘合管道系统 监控系统

This European Standard specifies basic functional requirements for surveillance systems for district heating pipe systems, specific requirements for measuring elements and their installation within preinsulated bonded pipes, valves and fittings, and the field assembly of these measuring elements in pipe joints.This standard specifies requirements for the manufacture of measuring elements, for the manufacture of preinsulated bonded pipe elements with measuring elements and for the assembly of the measuring elements in the field.All requirements and recommendations described in this standard are based on the experience gained with existing surveillance system

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems

DS/EN 448:2009 区域供热管道 直埋热水网络的预绝缘粘合管道系统 钢制服务管道、聚氨酯绝热材料和聚乙烯外壳的配件组件

This European Standard specifies requirements and test methods for fittings of prefabricated thermally insulated pipe-in-pipe assemblies comprising a steel service fitting from DN 20 to DN 1200, rigid polyurethane foam insulation and an outer casing of polyethylene for use in directly buried hot water networks with preinsulated pipe assemblies in accordance with EN 253.This European Standard covers the following fittings: bends, T-pieces, reducers, single use compensators and anchors.This European Standard applies only to insulated fitting assemblies and single use compensators for continuous operation with hot water at various temperatures in accordance wi

District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

DS/EN 15632-4:2009 区域供热管道 预绝缘柔性管道系统 第4部分：带金属供水管道的粘合系统；要求和测试方法

This European Standard provides requirements and test methods for flexible, pre-insulated, directly buried district heating pipe assemblies with metallic service pipes and bonding between the layers of the pipes and thermal insulation materials of polyurethane or polyisocyanurate foam. Casing pipe shall be made from polyethylene.This European Standard is valid for maximum operating temperatures up to 140 °C and pressures up to 25 bar for a design lifetime of at least 30 years. NOTE For higher temperatures or for the transport of other fluids, for example potable water, additional requirements and testing is needed. Such requirements are not specified in thi

District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods

DS/EN 15698-1:2009 区域供热管 直埋式热水管网用预绝缘粘合双管系统 第1部分：钢制服务管、聚氨酯隔热层和聚乙烯外壳的双管组件

This European Standard for District Heating Twin Pipes, specifies requirements and test methods for straight lengths of prefabricated thermally insulated pipe-in-pipe assemblies for directly buried hot water networks, comprising two steel service pipes from DN 15 to DN 250, rigid polyurethane foam insulation and one cylindrical outer casing of polyethylene. The pipe assembly may also include the following additional elements: Measuring wires, spacers and diffusion barriers.This standard applies only to insulated twin pipe assemblies, for continuous operation with hot water at various temperatures up to 120 °C and occasionally with a peak temperature up to 1

District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene

DS/EN 15632-1:2009 区域供热管道 预绝缘柔性管道系统 第1部分：分类、一般要求和试验方法

This European Standard provides classification, general requirements and test methods for flexible, pre-insulated, directly buried district heating pipe systems.It is intended to be used in conjunction with parts 2, 3, 4, and 5. Depending on the pipe assembly (see Table 4), this European Standard is valid for maximum operating temperatures of 95 °C to 140 °C and operating pressures of 6 bar to 25 bar.The pipe systems are designed for a lifetime of 30 years. For pipe systems with plastic service pipes, the respective temperature profiles are defined in EN 15632-2 and EN 15632-3.NOTE For the transport of other liquids, for example potable water, additional re

District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods

DS/EN 1074-6:2009 供水阀门 适用性要求和适当的验证测试 第6部分：消防栓

This European Standard defines the minimum fitness for purpose requirements for hydrants to be used in, or connected to, water supply pipe systems, above or below ground (see EN 805), carrying water intended for human consumption.This European Standard specifies the design requirements, the performance requirements, and the conformity assessment method for hydrants, whatever their type, materials and functions. Where hydrants can be used for fire fighting, irrigation or other function, additional requirements can be given in other standards.This part of EN 1074 deals with the requirements applicable to both underground and pillar hydrants, in sizes DN 65 to

Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants

ANSI/AWWA G200-2009 分布式系统操作和管理

This standard describes the critical requirements for the effective operation and management of drinking water distribution systems.

Distribution Systems Operation and Management

KS M ISO 24512:2008 饮用水和废水服务设施的相关工作.饮用水的使用管理和饮用水的服务设施指南

이 표준은 상수도 사업의 관리와 상수도 서비스의 평가에 대한 지침을 제공한다.이 표

Activities relating to drinking water and wastewater services-Guidelines for the management of drinking water utilities and for the assessment of drinking water services