93.025 外部输水系统 标准查询与下载

KS M ISO 24512:2008 饮用水和废水服务设施的相关工作.饮用水的使用管理和饮用水的服务设施指南

이 표준은 상수도 사업의 관리와 상수도 서비스의 평가에 대한 지침을 제공한다.이 표

Activities relating to drinking water and wastewater services-Guidelines for the management of drinking water utilities and for the assessment of drinking water services

GJJ 123-2008 镇(乡)村给水工程技术规程

Technical regulations on water supply projects in towns (rural areas) villages

SNI 6774-2008 水处理安装包单元规划程序

Tata cara perencanaan unit paket instalasi pengolahan air

ANSI/AWWA C560-2008 铸铁水闸

This standard describes vertically mounted, cast-iron slide gates designed for either seating head or unseating head, or both, in ordinary water-supply service. The cast-iron slide gates have machined metal faces and machined adjustable wedging devices. The cast-iron slide gates may be used for square, rectangular, or round openings. They may be of the conventional-closure or the flush-bottom-closure type. This standard also describes manual slide gate actuator mechanisms together with standard accessories.

Cast-Iron Sluice Gates

ANSI/AWWA C303-2008 钢筒形条绕的混凝土压力管

This standard describes the manufacture of concrete pressure pipe, reinforced with a steel cylinder that is helically wrapped with mild steel bar reinforcement, in sizes ranging from 10 in. through 72 in. (250 mm through 1,830 mm), inclusive, and for working pressures up to 400 psi (2,760 kPa). Larger pipe sizes and pipe accommodating higher pressures have been manufactured based on the concepts of this standard.

Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type

SNI 6773-2008 水处理配套设施的规格说明

Specification of water purification installation unit

ANSI/AWWA C226-2006 水务用尺寸0.5～72英寸(15～1800 mm)的不锈钢配件

This standard pertains to the various classes and types of stainless steel fittings that are intended for use in facilities of water distribution systems.

Stainless Steel Fittings for Waterworks Service Sizes l/2 In. Through 72 In. (15 mm Through 1,800 mm

EN 14801:2006 供水和废水管道产品压力分级条件

This document applies to components (pipes, joints, fittings, ferrules and valves), which have pressure related classification in European Standards covering products which are intended to be used for buried water supply and waste water pressure pipelines outside buildings. It specifies combinations of loading conditions and installation conditions to be used in the design method by reference to the relevant product standard for the determination of the allowable pressures (PFA, PMA and PEA) as defined in EN 805. This document does not apply as an installation guide. NOTE 1 This document does not give the full range of installation and loading parameters for all components and does not specify calculation and/or test methods for determination of the allowable pressures. NOTE 2 This document does not relieve designers of their obligation under EN 805:2000, 8.4; e.g. to consider all conditions not addressed in clause 5 (e. g. seismic loads). NOTE 3 This document does not deal with marking of components.

Conditions for pressure classification of products for water and wastewater pipelines

ANSI/AWWA C105/A21.5-2005 用于球墨铸铁管道系统的聚乙烯外壳

This standard covers materials and installation procedures for polyethylene encasement to be applied to underground installations of ductile-iron pipe. This standard also may be used for polyethylene encasement of fittings, valves, and other appurtenances to ductile-iron pipe systems.

Polyethylene Encasement for Ductile-Iron Pipe System

DIN 1988-7:2004 钢管和圆钢棒制作套筒螺母

The standard describes the measures to take for construction and operation of drinking water installations to keep down the rate of corrosion of the materials and the calcareous deposit.

Turnbuckles made from steel tubes or round steel bars

SL 308-2004 村镇供水单位资质标准

本标准适用于建制镇、集镇、村庄(居民社区)等集中式供水的供水单位资质认证和相关管理。

Qualification standards of water supply works for villages and towns

SL 310-2004 村镇供水工程技术规范

本规范适用于建制镇、集镇、村庄供水工程的建设和管理。

Technical code for water supply engineering of town and village

ARP 060-2004 南非饮用水运输用热镀锌钢管的使用指南

Gives guidance on water parameters for satisfactory usage of hot-dip galvanized steel piping for the transportation of potable water.

Guidance on the use and application of hot-dip galvanized steel piping for the transportation of potable water in South Africa

DS/EN 13280:2001 地上储存冷水用单件式和分段式玻璃纤维增强蓄水池规范

This European Standard specifies the requirements for rectangular and vertical cylindrical glass reinforced plastics (GRP) one piece cisterns and rectangular sectional tanks for the storage of water above ground for both domestic and industrial use.

Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water

DS/EN 1444:2001 纤维水泥管道 铺设和现场工作实践指南

This European Standard applies to both types of fibre-cement pipes AT and NT as defined in EN 512:1994, gives installation recommendations for these pipelines in above or below ground situations. It complements the general principles for all types of water supply systems specified in EN 805:2000, ""Water supply - Requirements for systems and components outside buildings"", and should be used in conjunction with that standard. This standard gives guidance in on-site working methods and in the selection and use of approved tools for cutting and machining fibre-cement pipes.

Fibre-cement pipelines - Guide for laying and on-site work practices

DS/EN 805:2001 供水 建筑物外系统和组件的要求

This standard specifies: - general requirements for water supply systems outside buildings (see figure 1) including potable water mains and service pipes, service reservoirs, other facilities and raw water mains but excluding treatment works and water resources development; - general requirements for components; - general requirements for inclusion in product standards which may include specifications which are more stringent; - requirements for installation, site testing and commissioning.

Water supply - Requirements for systems and components outside buildings

DS/EN 1074-4:2000 供水阀门 适用性要求和适当的验证测试 第4部分：空气阀

This European Standard specifies the minimum fitness for purpose requirements for valves to be used in, or connected to, water supply pipe systems above or below ground, carrying water intended for human consumption.

Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves

BS EN 805:2000 供水.建筑物外部的系统和构件的要求

This standard specifies: — general requirements for water supply systems outside buildings (see Figure 1), including potable water mains and service pipes, service reservoirs, other facilities and raw water mains but excluding treatment works and water resources development; — general requirements for components; — general requirements for inclusion in product standards which may include specifications which are more stringent; — requirements for installation, site testing and commissioning. The requirements of this standard apply to: — the design and construction of new water supply systems; — the extension of significant areas forming a coherent part of an existing water supply system; — significant modification and/or rehabilitation of existing water supply systems. NOTE It is not intended that existing water supply systems are to be altered to comply with this standard, provided that there are no significant detrimental effects on water quantity, security, reliability and adequacy of the supply.

Water supply - Requirements for systems and components outside buildings

NF P41-010*NF EN 805:2000 供水.建筑物外部供水系统和部件要求

Water supply - Requirements for systems and components outside buildings.

DIN EN 805:2000 供水.建筑物外部系统和元件要求

This document contains requirements for pipeline components used in water supply, guides for the designer of water supply systems, guidance on the construction of pipelines in trenches (and under embankment), general requirements for pressure tests of water supply pipelines and terms and definitions.#,,#

Water supply - Requirements for systems and components outside buildings; German version EN 805:2000