A87 运输、贮存 标准查询与下载

WB/T 1028-2006 库区、库房防火防爆管理要求

本标准规定了仓库库区、库房防火防爆的基本原则、要求与组织管理，及此区域内的建筑、设施、物品和火源管理要求。 本标准适用于各类常规物资仓库，货场。诸如储存火药、炸药、火工品和军工物资的专用仓库也可适当参考使用本标准。

Fire-free/explosion-free specification for store-areas and storehouse

WB/T 1027-2006 仓储劳动安全管理要求

本标准规定了现代仓储企业劳动安全管理的术语和定义、基本要求、组织机构设置与责任、安全教育管理、作业现场安全管理、安全检查、伤亡事故管理。 本标准适用于现代仓储企业（下称企业）。其他类型仓库、货场或配送中心等亦可参照执行。

Administrative specification for warehousing labor safety

UIC OR 421-2006 国际货运列车组成的制动用规则

The leaflet is structured in throe parts: - the firs1 part contains joint provisions applicable to all freight trains in international traffic, - the second part defines the consist and braking conditions applicable to the different speed ranges for trains under "P" conditions, - the third pert contains similar provisions for trains braked under "G" conditions.

Regulations for the consist and braking of international freight trains

DIN EN 14943:2006 运输服务.后勤.术语表

This European Standard establishes definitions for commonly used terms in logistics. It encompasses all aspects of logistics and supply chain management including transport. The terms with their definitions are presented in strict alphabetical order with no attempt to relate them to the any particular function within the logistics concept. Annex A addresses the subject of the appropriate structure for a logistics system. Annex B contains a dictionary of equivalent terms and Annex C provides a glossary of relevant acronyms.

Transport services - Logistics - Glossary of terms; German version EN 14943:2005

ASTM F2577-06 应申报物质材料和产品的评估标准指导

1.1 This guide uses case studies to illustrate the decision process to assess materials and products for declarable substances when evaluating conformance to relevant requirements. This may be accomplished by applying existing knowledge to determine the need for further action (for example, testing).This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Assessment of Materials and Products for Declarable Substances

DIN EN 12507:2005 运输服务.EN ISO9002-2000标准在道路运输,储存,配送和铁路货运工业的应用指南说明

This European Standard implements Guidance notes on the application of EN ISO 9001:2002, quality management systems, on management of road and rail freight transport services, including the corresponding fields of activity such as storage and distribution.

Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries; German version EN 12507:2005

MH/T 1019-2005 民用航空危险品运输文件

本标准规定了民用航空危险品运输文件的格式和填写要求。 本标准适用于民用航空危险品运输文件的填写和制作。

Civil aviation transport documents for dangerous goods

BS EN 13876:2004 运输.后勤和服务.货物运输链.货物运输服务提供的实施规则

Transport - Logistics and services - Goods transport chains - Code of practice for the provision of cargo transport services

BS EN 13011:2001 运输服务.货物运输链.性能状态公示系统

This European Standard specifies requirements for making declarations with regard to the quality of performance of a goods transport service. It is intended to establish a means whereby service providers can set out specific data with regard to the performance criteria relevant to the service being provided that will enable shippers/packers to adequately plan their requirements and to meet their obligations under the packaging and packaging waste directive. This European Standard does not specify standards of performance. Annex A provides an example of a suitable form of declaration.

Transport services - Goods transport chains - System for declaration of performance conditions

ISO 10725:2000 散料验收抽样检验程序和抽样方案

This International Standard specifies acceptance sampling plans by the determination of variables and use of acceptance inspection procedures for bulk materials. These sampling plans comply with specific operating characteristic curves at reasonable cost. This International Standard is applicable to the inspection where the lot mean of a single quality characteristic is the principal factor in the determination of lot acceptability, but it also gives special procedures for multiple quality characteristics. This International Standard is applicable to the cases where the values of standard deviations at individual stages of sampling are known or are imprecise. This International Standard is applicable to various kinds of bulk materials, but is not always applicable to minerals such as iron ores, coals, crude petroleum, etc., where accurate estimation of the lot mean is more important than the determination of lot acceptability. For special cases when standard procedures are not always adequate and the measurement standard deviation is dominant, this International Standard specifies special acceptance sampling plans and procedures, such as in the case for liquids.

Acceptance sampling plans and procedures for the inspection of bulk materials

ASTM E1565-00(2006) 低温下保存的生物材料库存量控制与搬运的标准指南

The proper handling of material stored at low temperatures ensures that the stability of sensitive biological materials is not comprised. Properly designed inventory control systems ensure the maximum use of freezer space, that all material can be located easily, and that any item is retrieved easily without compromising the stability of other items in the freezer. Properly designed safety and security procedures ensure that material stored at low temperatures is not comprised during storage, and that if material is lost due to freezer failure or operational problems, replacement material is available (see Guide E 1566).1.1 This guide covers recommended procedures for handling material stored at low temperatures in mechanical freezers and liquid nitrogen freezers.1.2 This guide covers recommendations for implementing procedures for ensuring adequate inventory control.1.3 This guide covers recommendations for implementing procedures for safeguarding material stored at low temperatures.1.4 This guide does not cover the development or maintenance of equipment and facilities for low-temperature storage which are covered in Guide E 1564.1.5 This guide does not cover practices for preservation by freezing which are covered in Practice E 1342.1.6 The values stated in SI units are to be regarded as the standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures

ASTM E1566-00(2006) 放在液氮中的危险生物材料搬运的标准指南

This guide is intended for use by individuals maintaining and handling hazardous biological material in liquid nitrogen freezers. This guide does not cover all aspects of every situation that may be encountered in maintaining hazardous biological material in liquid nitrogen; each situation must therefore be assessed individually using these guidelines. This guide is not intended for use with systems other than liquid nitrogen storage. This guide does not cover practices for preservation by freezing which are covered in Practice E 1342. 1.1 This guide covers recommended procedures for maintaining and handling hazardous biological materials at liquid nitrogen temperatures.1.2 This guide covers the safety precautions recommended when handling material stored in liquid nitrogen.1.3 This guide does not cover the maintenance and handling of hazardous biological materials maintained at cryogenic temperatures in systems other than liquid nitrogen.1.4 The values stated in SI units are to be regarded as the standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen

ASTM D5728-00(2006) 联运和单一方式运输中货物安全的标准实施规程

Numerous sources provide detailed information as to the loading, blocking, bracing, and unloading of specific types of cargo in unimodal and intermodal transport. Some of these sources are proprietary, others are massive and complex in scope, and none are consistently promulgated to shippers, carriers, and consignees. Many of the losses experienced by cargo in transport are due to the failure to practice proper basic cargo handling and loading techniques. These practices are intended to outline those techniques in simple, clear, generic, and easy to promulgate formats, including posters, slides, videotapes, and pamphlets, and are further intended to serve as the basis upon which a comprehensive cargo handling methodology may be built. Users of these practices should avail themselves of the detailed resource information available. The practices as defined are not sufficient to form a complete cargo handling protocol.1.1 These practices are intended to serve as a guide to shippers, carriers, and consignees for load planning, loading, blocking, and bracing of intermodal and unimodal cargo in surface transport. The practices are referenced to a bibliography of information concerning the above. Hazardous materials, bulk cargo, non-containerized break bulk in ocean carriage, and transport of cargo by air are not included in these practices at this time. 1.2 These practices shall apply to cargo in surface transport on flat bed, open top, box car, truck van and intermodal containers. 1.3 The practices are intended to form a framework for the safe and effective loading and unloading of cargo in intermodal and unimodal surface transport. They are not intended to provide comprehensive detail relating to specific types of cargo, but will reference to source materials wherein such detail may be found. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport

ASTM E1566-00 放在液氮中的危险生物材料搬运的标准指南

1.1 This guide covers recommended procedures for maintaining and handling hazardous biological materials at liquid nitrogen temperatures. 1.2 This guide covers the safety precautions recommended when handling material stored in liquid nitrogen. 1.3 This guide does not cover the maintenance and handling of hazardous biological materials maintained at cryogenic temperatures in systems other than liquid nitrogen. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen

ASTM D5728-00 联运和单一方式运输中货物安全的标准实施规程

1.1 These practices are intended to serve as a guide to shippers, carriers, and consignees for load planning, loading, blocking, and bracing of intermodal and unimodal cargo in surface transport. The practices are referenced to a bibliography of information concerning the above. Hazardous materials, bulk cargo, non-containerized break bulk in ocean carriage, and transport of cargo by air are not included in these practices at this time. 1.2 These practices shall apply to cargo in surface transport on flat bed, open top, box car, truck van and intermodal containers. 1.3 The practices are intended to form a framework for the safe and effective loading and unloading of cargo in intermodal and unimodal surface transport. They are not intended to provide comprehensive detail relating to specific types of cargo, but will reference to source materials wherein such detail may be found. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport

ASTM E1565-00 低温下保存的生物材料库存量控制与搬运的标准指南

1.1 This guide covers recommended procedures for handling material stored at low temperatures in mechanical freezers and liquid nitrogen freezers. 1.2 This guide covers recommendation for implementing procedures for ensuring adequate inventory control. 1.3 This guide covers recommendations for implementing procedures for safeguarding material stored at low temperatures. 1.4 This guide does not cover the development or maintenance of equipment and facilities for low-temperature storage which are covered in Practice E1564. 1.5 This guide does not cover practices for preservation by freezing which are covered in Practice E1342. 1.6 The values stated in SI units are to be regarded as the standard. 1.7 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures

ASTM F1599-95(2003) 临时存储器件性能数据收集的标准导则

This guide covers the collection of quantitative data in the form of storage capacity, strength of materials, filling and offloading rates, and towability under controlled test conditions. The data can be used for evaluating the design characteristics of a particular temporary storage device or as a means of comparing two or more devices. Caution must be exercised whenever the test data are used to predict performance in actual spill situations since the uncontrolled environmental conditions that affect performance in the field are rarely identical to conditions in the test facility. Other variables such as mechanical reliability, the presence of debris, ease of repair, required operator training, operator fatigue, and transportability also affect performance in an actual spill but are not included in this guide. These variables should be considered along with the test data when making comparisons or evaluations of temporary storage devices. Although this guide provides data on the performance of temporary storage devices, all of the combinations of actual conditions of use are not simulated in this series of tests. In particular, the resistance of the device to grounding, abrasion resistance of the container body, venting of the device during loading, and other operational issues not covered by this guide should be considered along with the test data when making comparisons or evaluations of temporary storage devices.1.1 This guide covers a guideline for measuring the performance parameters of full-scale temporary storage devices that would be used to store oil and oil-water mixtures.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 6.2.

Standard Guide for Collecting Performance Data on Temporary Storage Devices

ANSI/ASAE D241.4-1993 储存谷物的密度,比重和水分重量的关系

Provide recommendations for density, specific gravity and moisture for grain storage.

Density, Specific Gravity, and Weight Moisture Relationships of Grain for Storage

BS 7488:1991 灌装厂、仓库和零售处搬运装有碳酸软饮料或苏打水推荐标准

Recommendations for bottles that are under pressure from their contents. Intended for managers and supervisors in soft drinks bottling factories, in charge of distribution lorries, in warehouses , depots and retail outlets up to the point where the product is purchased and removed from the premises.

Recommendations for handling glass bottles, containing carbonated soft drinks or carbonated water, in filling plants, warehouses, and retailers' premises

DIN 15185-1:1991 带导向工业货车的仓库系统.对地面和仓库的要求及其他要求

Warehousesystems with guided industrial trucks; requirements on the ground, the warehouse and other requirements