D53 建材原料矿 标准查询与下载

NF B10-605:2008 烧结石料.壁橱和厨房顶部用背板和切裁尺寸制品

Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops.

ASTM D7390-07 通过两种环境之间的比较评估石棉粉表面的标准指南

This guide describes factors to be considered by an investigator designing a sampling program to compare the asbestos dust loadings in two environments and presents statistical methods for making the comparison. Each user is responsible for the design of an investigation and the interpretation of data collected when using dust data. This guide does not deal with situations where dusts of different compositions or from different surfaces are to be evaluated. This guide describes methods for interpreting the results of sampling and analysis performed in accordance with Test Methods D 5755, D 5756, and D 6480. It may be appropriate to use the procedures in this Guide with other dust collection and analysis methods, but it is the responsibility of the user to make this determination. The methods described in this guide are not intended to be used alone. They are intended to be used along with various evaluation methods that may include consideration of building use, activities within the building, air sampling, asbestos surveys (refer to Practice E 2356), evaluation of building history and study of building ventilation systems. This guide describes methods for comparing environments and does not draw any conclusions relating asbestos surface loadings to the potential safety or habitability of buildings. This guide does not address risk assessments or the use of dust sampling in risk assessment. Health based risk assessments are beyond the scope of this guide. Warning8212;Asbestos fibers are acknowledged carcinogens. Breathing asbestos fibers can result in disease of the lungs including asbestosis, lung cancer, and mesothelioma. Precautions should be taken to avoid creating and breathing airborne asbestos particles when sampling and analyzing materials suspected of containing asbestos. Regulatory requirements addressing asbestos are defined by USEPA4 ,5 and OSHA6 .1.1 There are multiple purposes for determining the loading of asbestos in dust on surfaces. Each particular purpose may require unique sampling strategies, analytical methods, and procedures for data interpretation. Procedures are provided to facilitate application of available methods for determining asbestos surface loadings and/or asbestos loadings in surface dust for comparison between two environments. At present, this guide addresses one application of the ASTM surface dust methods. It is anticipated that additional areas will be added in the future. It is not intended that the discussion of one application should limit use of the methods in other areas. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 5.7.

Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments

YS/T 509.10-2006 锂辉石、锂云母精矿化学分析方法 离子选择电极法测定锂云母中氟量

Chemical analysis method of spodumene and lepidolite concentrate Determination of fluorine content in lepidolite by ion selective electrode method

YS/T 509.1-2006 锂辉石、锂云母精矿化学分析方法 原子吸收分光光度法测定氧化锂、氧化钠和氧化钾量

Methods for chemical analysis of spodumene and lepidolite concentrates - Determination of lithium oxide, sodium oxide and potassium oxide by atomic absorption spectrophotometry

YS/T 509.2-2006 锂辉石、锂云母精矿化学分析方法 原子吸收分光光度法测定氧化铷和氧化铯量

Chemical analysis methods of spodumene and lepidolite concentrates Determination of rubidium oxide and cesium oxide by atomic absorption spectrophotometry

YS/T 509.8-2006 锂辉石、锂云母精矿化学分析方法 铬天青S-CTMAB 光度法测定氧化铍量

Chemical analysis method of spodumene and lepidolite concentrate Determination of beryllium oxide content by chrome azure S-CTMAB spectrophotometry

YS/T 509.12-2006 锂辉石、锂云母精矿化学分析方法 重量法测定烧失量

Determination of loss on ignition by gravimetric method for chemical analysis of spodumene and lepidolite concentrates

YS/T 509.4-2006 锂辉石、锂云母精矿化学分析方法 EDTA容量法测定三氧化二铝量

Spodumene and Lepidolite Concentrate Chemical Analysis Method EDTA Volumetric Method Determination of Al2O3 Content

YS/T 509.5-2006 锂辉石、锂云母精矿化学分析方法 EDTA容量法测定三氧化二铁量

Spodumene and Lepidolite Concentrate Chemical Analysis Method EDTA Volumetric Method for Determination of Ferric Oxide Content

YS/T 509.6-2006 锂辉石、锂云母精矿化学分析方法 邻二氮杂菲光度法测定三氧化二铁量

Method for chemical analysis of spodumene and lepidolite concentrate - Determination of ferric oxide by o-diazephenanthrene photometry

YS/T 509.9-2006 锂辉石、锂云母精矿化学分析方法 原子吸收分光光度法测定氧化钙、氧化镁量

Chemical analysis methods of spodumene and lepidolite concentrates - Determination of calcium oxide and magnesium oxide by atomic absorption spectrophotometry

YS/T 509.3-2006 锂辉石、锂云母精矿化学分析方法 重量-钼蓝光度法测定二氧化硅量

Method for Chemical Analysis of Spodumene and Lepidolite Concentrates Gravimetric-Molybdenum Blue Photometric Method for Determination of Silica Content

NF B10-602-15:2005 烧结石料.试验方法.第15部分:抗压强度的测定

Agglomerated stone - Test methods - Part 15 : determination of compressive strength.

NF B10-600:2005 烧结石料.术语和分类

Agglomerated stone - Terminology and classification.

NF B10-602-10:2005 烧结石料.试验方法.第10部分:耐化学性的测定

Agglomerated stone - Test methods - Part 10 : determination of chemical resistance.

NF B10-602-13:2005 烧结石料.试验方法.第13部分:电阻率的测定

Agglomerated stone - Test methods - Part 13 : determination of electrical resistivity.

NF B10-602-4:2005 烧结石料.试验方法.第4部分:耐磨性的测定

Agglomerated stone - Test methods - Part 4 : determination of abrasion resistance.

NF B10-602-11*NF EN 14617-11:2005 烧结石料.试验方法.第11部分:线性热膨胀系数的测定

Agglomerated stone - Test methods - Part 11 : determination of linear thermal expansion coefficient.

JIS M 8511:2005 天然石墨工业分析和试验方法

この規格は，天然黒鉛の工業分析及び試験方法について規定する。

Methods for industrial analysis and testing of natural graphite

JIS M 8601:2005 天然石墨

この規格は，天然黒鉛の品位について規定する。

Natural graphite