K52 发电机组 标准查询与下载

DIN 6280-14:1997 发电机组.活塞式内燃机驱动的发电机组.第14部分:活塞式内燃机驱动的综合热电厂.基础、要求、组合部件、结构和维护

Generating sets - Reciprocating internal combustion engines driven generating sets - Part 14: Combined heat and power system (CHPS) with reciprocating internal combustion engines; basics, requirements, components and application

DIN 6280-15:1997 发电机组.活塞式内燃机驱动的发电机组.第15部分:活塞式内燃机驱动的综合热电厂.试验

The document applies to combined heat and power systems (CHPS) with reciprocating internal combustion engines for generating a.c. current and usable heat. It applies to single and multiproduction CHPS-modules. It lays down common definitions and requirements which for the preparation and realisation of tests of CHPS-modules in order to achieve common evaluation procedures. Differenciation is made between type tests and acceptance tests (multi-production and ready for use CHPS-modules) and acceptance tests (single production CHPS-modules).

Generating sets - Reciprocating internal combustion engines driven generating sets - Part 15: Combined heat and power system (CHPS) with reciprocating internal combustion engines; tests

JB/T 8587-1997 内燃机电站安全要求

Safety requirement for internal combustion engine power stations

BS 7698-8:1996 往复式内燃机驱动的交流发电机组.低功率发电机组要求和试验

This part of ISO 8528 defines requirements, minimum performances and type tests for low-power generat-ing sets driven by reciprocating internal combustion engines for land and marine use (domestic, recre-ational and industrial application), excluding generating sets used on aircraft. It concerns mainly low-power generating sets driven by reciprocating internal combustion engines for the generation of single or multiphase alternating current or direct current up to 500 V. The generating sets are standard manufactured sets that can be selected from a commercial catalogue or leaflet. In this part of ISO 8528, "low power" is taken to mean power of a magnitude up to approximately 10 kW. NOTE 1 An exact determination of a power limit is not possible. Low-power generating sets for the purpose of this standard are determined by the following special fea-tures: — the users normally are laymen (for further details see 3.1); — the complete generating set is usually transport-able, or mobile; — the electrical output is connected by plugs and sockets (except for extra low voltages; see 6.6.3); — the generating set is ready for use without any additional installation work by the user. Generating sets for special applications or of higher rated power conforming to the above special features may, by agreement between manufacturer and cus-tomer, be tested in accordance with this part of ISO 8528. If supplementary stipulations are required for certain applications this should be done taking this part of ISO 8528 as a basis. This part of ISO 8528 deals with the special require-ments of test and safety design which should be ob-served in addition to the definitions and requirements laid down in ISO 8528 parts 1 to 6, where applicable. Furthermore it lays down safety requirements in order to protect the user from danger.

Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets

BS 7698-7:1996 往复式内燃机驱动的交流发电机组.规格和设计的技术声明

This part of ISO 8528 specifies the requirements and parameters for the specification and design of a reciprocating internal combustion (RIC) engine driven generating set, with reference to the definitions given in ISO 8528-1 to ISO 8528-6. It applies to alternating current (a.c.) generating sets driven by RIC engines for land and marine use, ex-cluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (for example, essential hospital supplies, high-rise buildings, etc.) sup-plementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as a basis. For other reciprocating-type prime movers (e.g. sew-age gas engines, steam engines), the provisions of this part of ISO 8528 should be used as a basis.

Reciprocating internal combustion engine driven alternating current generating sets - Technical declarations for specification and design

DIN 6280-12:1996 发电机组.连续供电.第12部分:带和不带活塞式内燃机的动力USV设备

The document defines with due regard to the requirements specified in DIN 6280-1 to DIN 6280-9 the special requirements and test for generating sets and machine sets for uninterruptible power supply or to ensure the required quality of an a.c. power supply.

Generating sets - Uninterruptible power supply - Part 12: Dynamic UPS systems with and without reciprocating internal combustion engines

IEEE 387-1995 用作核电站备用电源的柴油发电机组准则

Describes the criteria for the application and testing of diesel-generator units as Class 1E standby power supplies in nuclear power generating stations.

Standard Criteria for Diesel-Generator Units Applied as Standby Power Generating Stations

ISO 8528-8:1995 往复式内燃交流发电机组 第8部分:小功率发电机组技术要求和试验

Defines requirements and type tests for low-power generating sets (up to approximately 10 kW) driven by reciprocating internal combustion engines, excluding generating sets used on aircraft.

Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets

ISO 8528-9:1995 往复式内燃交流发电机组 第9部分:机械振动的测量和评定

Describes a procedure for measuring and evaluating the external mechanical vibration behaviour of alternating current generating sets driven by reciprocating internal combustion engines. Applicable to fixed and mobile generating sets for land and marine use, excluding generating sets on aircraft or those used to propel land vehicles and locomotives.

Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibration

DD ENV 61400-1-1995 风力涡轮发电机系统.第1部分:安全性要求

Specifies safety philosophy, quality assurance and engineering integrity.

Wind turbine generator systems. Safety requirements

SANS 8528-7:1994 往复式内燃机驱动交流发电机组．第7部分：尺寸和设计的技术声明

Specifies the requirements and parameters for the specification and design of a reciprocating internal combustion (RIC) engine driven generating set, with reference to the definitions given in ISO 8528-1 to ISO 8528-6 (published in South Africa as SANS 8

Reciprocating internal combustion engine driven alternating current generating sets Part 7: Technical declarations for specification and design

JB/T 7605-1994 移动电站额定功率、电压及转速

　　本标准规定了用燃机为原动机的下列类型的一般用途的移动电站（含汽车电站、挂车电站、移动式发电机组）的额定功率、额定电压和额定转速的等级： a. 工频（50Hz）电站（60Hz电站可参考使用）； b. 中频（400Hz）电站； c. 双频（50Hz、400Hz）电站； d. 直流电站（含内燃机组经整流装置供电的类型）； 本标准适用于0.3～1250kW的电站。

Rated power, voltage and rotation rate of mobile generator sets

JB/T 7606-1994 内燃机电站总装技术要求

　　本标准规定了用燃机为原动机的下列类型的内燃机电站（含汽车电站、挂车电站、移动式发电机组、固定式发电机组）总装的基本技术要求： a. 工频（50Hz）电站（60Hz电站可参考使用）； b. 中频（400Hz）电站； c. 双频（50Hz、400Hz）电站； d. 直流电站（含内燃机组经整流装置供电的型式）。 本标准适用于0.3～3150kW的电站。

Technical requirements for general assembly of electric power stations with internal combustion engines

SN/T 0320-1994 出口柴油发电机组检验规程

Rules for the inspection of dieselelectric generating sets for export

DIN 6280-13:1994 发电机组.活塞式内燃机驱动的发电机组.第13部分:医院和公共建筑物的应急安全供电

The document defines with due regard to the requirements specified in DIN 6280 part 1 to 9, DIN VDE 0107 and DIN VDE 0108 the special requirements for RIC engine driven generating sets for emergency power supply in hospitals and communal facilities.#,,#

Generating sets - Reciprocating internal combustion engines driven generating sets - Part 13: For emergency power supply in hospitals and public buildings

NRS 024-1-1994 柴油交流发电机组．第1部分：固定装置用柴油交流发电机组

Covers the requirements for diesel alternator sets but is also applicable to other reciprocating internal combustion (RIC) engine-driven alternator sets for use in fixed installations in non-explosive atmospheres.

Diesel alternator sets Part 1: Diesel alternator sets for fixed installations - Preferred requirements for applications in their organizations by the dc and standby equipment representative user group

JB/T 56080-1994 大中型水电机组自动化元件 产品质量分等

1.1 本标准适用于按JB 3303《大中型水电机组自动化系统及元件基本技术文件》及JB 3305《大中型水电机组自动化元件系列型谱及符号》规定的范围，并经鉴定合格或型式试验合格的大中型水电机组自动化元件。 1.2 本标准是衡量企业产品质量(包括设计质量和制造质量)等级水平的统一规定，是考核产品质量、产品分等定级、企业升级、产品优质优价的依据。 1.3 产品质量等级分为合格品、一等品和优等品。 1.4 抽查产品应是正式生产的产品，试制产品不属于抽查范围，抽查品种为本年度生产的任何品种。 厂内抽查产品设计，工艺和零部件质量，出厂试验项目及结果，厂外抽查元件及其系统的性能指标。 使用情况可依据最近(不超过两年)的用户服务记录和用户意见。

Product quality classification of automation components for large and medium hydropower units

ISO 8528-7:1994 往复式内燃交流发电机组 第7部分:技术规格和设计说明

Establishes the requirements and parameters for the specification and design of a reciprocating internal combustion (RIC) engine driven generating set, with reference to the definitions given in ISO 8528-1 to ISO 8528-6. Applies to a.c. current generating sets driven by RIC engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives.

Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design

UL 1310-1994 2级发电机组

Class 2 power units

BS 7698-6:1993 往复式内燃机驱动交流发电机组.第6部分:试验方法

This part of ISO 8528 specifies test methods for the characteristics of an entire generating set. Existing test methods for the engine (ISO 3046-2 and ISO 3046-3) and generator (IEC 34-2) should be used for those components. The generating set manufac-turer is responsible for specifying these character-istics and the tests to be performed. It applies to alternating current (a.c.) generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding gener-ating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (for example, essen-tial hospital supplies, high-rise buildings, etc.) sup-plementary requirements may be necessary. The provisions of this part of ISO 8528 should be re-garded as a basis. For a.c. generating sets driven by other reciprocat-ing type prime movers (e.g. sewage gas engines, steam engines) this part of ISO 8528 should be used as a basis.

Reciprocating internal combustion engine driven alternating current generating sets - Test methods