S35 牵引电气设备 标准查询与下载

IEC 60077-5:2003 轨道交通.机车车辆用电气设备.第5部分:电工元件.HV熔断器规则

本部分规定了高压熔断器的附加或修改规则，作为GB／T 21413．2中的相关规定的补充。 注：在该产品标准中，术语“高压熔断器”指在铁道机车车辆领域电压范围使用的熔断器。 本部分规定的高压熔断器是指连接到主电路和／或辅助电路的高压熔断器。根据IEC 60850：2000 所规定的范围，这些电路的标称电压为直流600 V一3 000 V。这些熔断器也可用在标称电压 0—1 500 V的交流辅助电路中。 注：经过用户和制造商的协商后，这些规则可以用在安装在其他机车车辆(如矿山机车、无轨电车等)上的熔断 器上。 在本部分与GB／T 21413．2一起作了卜列规定： a) 熔断器特性。 b) 熔断器应满足： ——在正常条件下的工作性能； 在短路条件下的工作性能； ———介电特性。 c) 用于验证熔断器在使用条件下符合特性的试验项目及试验方法。 d) 熔断器需标识或给出的信息。 本部分不适用于熔断器的并联联接。 在本部分起草期间，充分考虑了GB 13539．1—2002和GB 15166．2——1994标准，并尽可能保留其 要求。 本部分参考了GB／T 21413．2 2008中规定的电工器件通用规则，但一般使用条件直接参考 GB／T 21413．1—2008。

Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components; Rules for HV fuses

NF F42-149:2003 轨道交通.固定式装置.电力牵引.铜和铜合金凹槽滑接线

Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires.

NF F65-377-3:2003 轨道交通.机车车辆.第3部分:间接变流器供电的交流电动机及其他控制系统的组合检验

Railway applications - Rolling stock - Part 3 : combined testing of alternating current motors, fed by an indirect convertor, and their control system.

NF F42-119*NF EN 50119:2003 轨道交通.固定装置.电气牵引架空接触线

Railway applications - Fixed installations - Electric traction overhead contact lines.

DIN EN 50306-2:2003 轨道交通.具备专门防火性能的铁路车辆电缆.薄壁.第2部分:单芯电缆

Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 2: Single core cables; German version EN 50306-2:2002

DIN EN 50306-4:2003 轨道交通.具备专门防火性能的铁路车辆电缆.薄壁.第4部分:多芯和多对电缆标准壁护套

Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 4: Multicore and multipair cables standard wall sheathed; German version EN 50306-4:2002

IEC 62128-1:2003 轨道交通.固定设备.第1部分:电气安全和接地相关的保护性措施

Specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c.- and d.c.-traction systems and to any installations that may be endangered by the traction power supply system. Also applies to

Railway applications - Fixed installations - Part 1: Protective provisions relating to electrical safety and earthing

DIN EN 50306-1:2003 轨道交通.具备专门防火性能的铁路车辆电缆.薄壁.第1部分:一般要求

Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 1: General requirements; German version EN 50306-1:2002

DIN EN 50306-3:2003 轨道交通.具备专门防火性能的铁路车辆电缆.薄壁.第3部分:单芯和多芯电缆(双芯、三芯和四芯)屏蔽及薄壁护套

Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed; German version EN 50306-3:2002

UIC OR 608-2003 国际航线用牵引机组的动臂装置的遵循条件

Conditions to be complied with for the pantographs of tractive units used in international services

TB/T 3076-2003 轨道交通.机车车辆.电气隐患防护的规定

本标准适用于铁路运输系统的机车车辆、由外部供电的公路车辆(电车)、磁悬浮车辆以及其他机车车辆上的电气装置和设备的设计与制造，以保护有关人员不受电击，根据不同的操作和步骤其要求有所不同。 本标准不适用于: — 地下矿井内的矿山铁路; — 铁道起重装置、移动平台和类似的运翰系统; — 索道; — 临时设施。 按标准的要求对机车车辆进行试验，参见IEC6 11330。

Railway applications-Rolling stock Protective provisions against electrical hazards

TB/T 3075-2003 轨道交通.机车车辆设备.电力电子电容器

本标准适用于铁路机车车辆上用的电力电子电容器。 本标准所涉及的电容器的额定电压限制在10k V以内。 采用此类电容器系统的工作频率通常低于2500Hz，而脉冲频率可高达几千赫，在某些情况下可超过MHz。 电容器分为交流电容器和直流电容器两种。 本标准中电容器均为带有外壳的器件。 注:本标准包括很广范围内的电容器的应用技术:过电压保护、直流和交流滤波器、开关电路、直流贮能、辅助变流器等等。 本标准不适用于以下电容器: — 感应加热装置用工作频率在408z至24kHz之间的电容器(见IEC 60110); — 交流电动机使用的以及类似的电容器(见IEC 60252); — 电力供电网中用于阻塞一种或多种谐波而在电路中使用的电容器; — 管形荧光灯和其他放电灯用的小型交流电容器(见IEC 61048或IEC 61049); — 抑制电磁干扰用的电容器(见IEC 60384-14); — 额定电压1kV以上的交流电力系统用并联电容器(见IEC6 0871-1,IB C6 0871-2); — 额定电压1kV及以下的交流系统用自愈式并联电力电容器(见IEC 60831-1,IB C6 0831-2); — 额定电压1kV及以下的交流系统用非自愈式并联电力电容器(见IEC 60931-1,IEC 60931-2) ; — 非用于主电路的电子电容器(见IEC 60080和IEC 60166); — 电力系统用串联电容器(见IEC 60143); — 祸合电容器和电容分压器(见IEC 60358); — 用于需要能量贮存/大电流放电〔如照相复制和激光)方面的电容器; — 微波炉用的电容器。 示例在第6章中给出。

Railway applications-Rolling stock equipment-Capacitors for power electronics

TB/T 1393-2003 轨道交通.机车车辆电气设备.开启式功率电阻器规则

本标准规定了机车车辆主电路和辅助电路用各种功率电阻器(如制动电阻、加热电阻、吸收电阻和滤波电阻)的使用规则，而不考虑它们所应用的电路和机车车辆的类型。 这类电阻器通常由开启式结构组成，而且在有污染区域使用。这种结构的电阻元件通常由栅、板条、带或线等形状构成。 注:经过用户和制造商同意，这些规则的某些条款适用于其他车辆如矿用机车、无轨电车等的电气设备。 本标准规定了: —电阻参数; —功率电阻应满足的使用条件; —验证使用条件的试验和试验方法; —电阻上的标识及其参数。 本标准不再重复TB/T 1333.1已作规定的一般使用条件及通用规则。 为了得到部件相应范围试验和要求的一致性，避免按不同的标准进行试验，本标准规定TB/T 1333.1中的通用规则适用于机车车辆用功率电阻器。

Railway applications-Electric equipment for Rolling stock-Rules for power resistors of open construction

DIN EN 50317:2003 轨道交通.集流系统.电杆和架空接触线间动态接触测量要求和确认

Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002

IEC 60077-4:2003 轨道交通.机车车辆用电气设备.第4部分:电工元件.交流断路器规则

In addition to the general requirements of IEC 60077-2, this part of IEC 60077 gives rules for AC circuit-breakers, the main contacts of which are to be connected to AC overhead contact lines; the nominal voltage of these circuits being in accordance with IEC 60850. This standard, together with IEC 60077-2, states specifically: a) the characteristics of the circuit-breakers; b) the service conditions with which circuit-breakers have to comply with reference to: - operation and behaviour in normal service, - operation and behaviour in short-circuit, - dielectric properties; c) the tests for confirming the compliance of the components with the characteristics under the service conditions and the methods to be adopted for these tests; d) the information to be marked on, or given with the circuit-breaker. NOTE 1 Circuit-breakers which are dealt with in this standard may be provided with devices for automatic opening under pre-determined conditions other than those of over-current, for example, undervoltage and reversal of power current. This standard does not deal with the verification of operation under such predetermined conditions. NOTE 2 The incorporation of electronic components or electronic sub-assemblies into electrotechnical compo-nents is now common practice. Although this standard is not applicable to electronic equipment, the presence of electronic components does not provide a reason to exclude such electrotechnical components from the scope. Electronic sub-assemblies included in the circuit-breakers should comply with the relevant standard for electronics (IEC 60571). NOTE 3 Certain of these rules may, after agreement between user and manufacturer, be used for electrotechnical components installed on vehicles other than rail rolling stock. This standard does not cover industrial circuit-breakers which have to comply with IEC 60056. For these, in order to ensure satisfactory operation, this standard should be used to specify only the particular requirements for rolling stock. In such cases, a specific document should state the additional requirements with which the industrial circuit-breakers are to comply, for example: - either to be adapted (e.g. for control voltage, environmental conditions, etc.); - or to be installed and used so that they do not have to endure specific rolling stock conditions; - or to be additionally tested to prove that these components can withstand satisfactorily the rolling stock conditions.

Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components; Rules for AC circuit-breakers

ANSI/IEEE 1570:2002 在干线铁路交汇处铁路支线和干线支线间的接口标准

Defines the logical and physical interfaces, and the performance attributes for the interface between the rail subsystem and the highway subsystem at a highway rail intersection.

Standard for the Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail Intersection

BS EN 60077-3:2003 轨道交通.机车车辆用电气设备.电气部件.直流断路器规则

To be read in conjunction with BS EN 60077-1, BS EN 60077-2

Railway applications. Electric equipment for rolling stock. Electrotechnical components. Rules for d.c. circuit-breakers

BS EN 60077-1:2003 轨道交通.机车车辆用电气设备.一般服务条件和通用规则

Railway applications. Electric equipment for rolling stock. General service conditions and general rules

BS EN 61377-2:2003 轨道交通.机车车辆.联合试验.断路直流牵引电动机及其控制设备

Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control

BS EN 60077-2:2003 轨道交通.机车车辆用电气设备.电气元件.一般规则

Railway applications - Electric equipment for rolling stock - Electrotechnical components - General rules