T37 点火装置 标准查询与下载
共找到 193 条与 点火装置 相关的标准，共 13 页
Road vehicles - End-of-life activation of on-board pyrotechnic devices - General information and use case definitions
- ICS
- 43.040.80
- CCS
- T37
- 发布
- 2008-06-30
- 实施
- 2008-06-30
Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 1: General information and use case definitions
- ICS
- CCS
- T37
- 发布
- 2008-05
- 实施
ISO 19072-1:2007 defines a common specification of the pyrotechnic device pocket interface. It also defines a sealed variant of the design.
Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Pocket interface definition
- ICS
- 43.040.10
- CCS
- T37
- 发布
- 2007-10-31
- 实施
- 2007-10-31
This part of ISO 19072 defines a common specification of the pyrotechnic device pocket interface. It also defines a sealed variant of the design.
Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition
- ICS
- 43.040.10
- CCS
- T37
- 发布
- 2007-10
- 实施
This part of ISO 19072 defines the performance criteria and requirements of a three-way connection interface, including ground connection, linking the pyrotechnic device and harness connector built into a road vehicle. Performance criteria and requirements are also defined for a sealed variant of the pyrotechnic device/initiator harness connector assembly, and for a two-way (without ground) variant of the pyrotechnic device/initiator harness connector assembly.
Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 2: Test methods and general performance requirements
- ICS
- 43.040.10
- CCS
- T37
- 发布
- 2007-10
- 实施
This standard is Road vehicles - Spark-plugs - Test methods and requirements; Technical Corrigendum 1
Road vehicles - Spark-plugs - Test methods and requirements; Technical Corrigendum 1
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2007-09
- 实施
This International Standard specifies the test methods and requirements for the mechanical and electrical performance of spark-plugs for use with spark ignition engines.
Road vehicles - Spark-plugs - Test methods and requirements
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2007-02-28
- 实施
- 2007-02-28
ISO 19813:2006 specifies tests and requirements for all types of high voltage boots on plug-top and pencil coils.
Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils
- ICS
- 43.040.10
- CCS
- T37
- 发布
- 2007-02-28
- 实施
- 2007-02-28
This International Standard specifies characteristics of M12 x 1,25 spark-plugs with flat seating and their cylinder head housings, for use with spark-ignition engines.
Road vehicles - M12 x 1,25 spark-plugs with flat seating and their cylinder head housings
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2006-10
- 实施
This International Standard specifies characteristics of M14x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings, for use with spark-ignition engines.
Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2006-10
- 实施
This International Standard specifies the dimensions of the solid post terminals and threaded terminals for spark-plugs for use with spark ignition engines.
Road vehicles - Spark plugs - Terminals
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2006-04-28
- 实施
- 2006-04-28
This International Standard specifies the dimensions of the solid post terminals and threaded terminals for spark-plugs for use with spark ignition engines.
Road vehicles - Spark-plugs - Terminals
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2006-03
- 实施
This International Standard specifies test methods and general requirements for unscreened high-voltage ignition cable assemblies, and is applicable to all such assemblies used in road vehicle applications.
Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2005-06-10
- 实施
- 2005-06-10
This part of ISO 6550 specifies the main characteristics of M8 × 1 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.
Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs
- ICS
- CCS
- T37
- 发布
- 2005-04
- 实施
This recommended practice is intended to provide a framework for performance testing of fuel cell systems (FCS's) designed for automotive applications with direct current (DC) output. The procedures described allow for measurement of performance relative to claims by manufacturers of such systems with regard to the following performance criteria: power; efficiency; transient response; start and stop performance; physical description; environmental limits; operational requirements; and integration. Since this recommended practice is based on the principal of performance measurement relative to a claim, the testing parties should take care to include any qualifying or unique circumstances leading to the test results reported in order to achieve full disclosure. For example, efficiency as defined in section 3.1.9 allows for the inclusion of thermal output benefit. If a test result is reported which takes advantage of this allowance this stipulation should be noted with the efficiency figure and the useful purpose of the thermal output (e.g. cabin heating) should be made clear.
Testing Performance of Fuel Cell Systems for Automotive Applications
- ICS
- 27.070
- CCS
- T37
- 发布
- 2005-01-05
- 实施
- 2011-10-24
Details test and examination criteria for manually operated piezo-electric spark gas ignition systems and components, designed to ignite an appliance burner(s), for use with natural, manufactured or mixed gases, liquefied petroleum gases or LP gas-air mi
Manually Operated Piezo-Electric Spark Gas Ignition Systems and Component (Same as CSA 6.23)
- ICS
- 27.060.20
- CCS
- T37
- 发布
- 2005
- 实施
This International Standard specifies the classes, types and dimensions of, and test methods and requirements for, unscreened high-voltage ignition cables used in spark-ignited engines for road vehicles.
Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2003-09-15
- 实施
- 2003-09-15
This SAE Recommended Practice was developed to provide a common understanding and usage of the technical terms useful in fuel injection systems for spark ignition engines. Additional nomenclature related to specific components is covered in the individual component sections.
Fuel Injection Nomenclature - Spark Ignition Engines
- ICS
- 01.040.43;43.060.40
- CCS
- T37
- 发布
- 2003-04
- 实施
- 2007-01-16
This part of ISO 6550 specifies the main characteristics of M10 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.
Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs
- ICS
- CCS
- T37
- 发布
- 2002-06
- 实施
This part of ISO 6518 defines terms related to the ignition systems of spark-ignited internal combustion engines intended for use in road vehicles.
Road vehicles - Ignition systems - Part 1: Vocabulary
- ICS
- 01.040.43;43.060.50
- CCS
- T37
- 发布
- 2002-06
- 实施
