T71 挂车 标准查询与下载

SAE J2664-2006 挂车摇摆反应试验程序

This SAE Information Report establishes a consistent procedure for measuring and analyzing the natural sway response of a particular trailer when attached to a particular vehicle under specific loading and operating conditions. This test procedure applies, but is not limited to, passenger cars, vans, light/medium-duty trucks as tow vehicles, and semitrailers with a Gross Vehicle Weight Rating (GVWR) of 11 794 kg (26 000 pounds) or less. Other applications include full trailers, tow dollies, tow bars, and the like. Other articulated vehicles can utilize this test procedure as long as the test does not exceed the linear behavior of the system. This test procedure does not apply to motorcycles towing trailers.

Trailer Sway Response Test Procedure

JT/T 652-2006 道路车辆　牵引座

本标准规定了牵引座的术语和定义、型号、技术条件、检验规则、标志、使用说明书、运输和贮存。 本标准适用于分别于GB/T 4606规定的50号牵引销、GB/T 4607规定的90号牵引销相连接的牵引座。

Road vehicles-Fifth wheel

NF S56-202:2005 休闲住宿车辆.12V直流超低压电器装置.第1部分:挂车

Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1 : caravans.

NF S56-203:2005 休闲住宿车辆.12V直流超低压电器装置.机动挂车

Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2 : motor caravans.

ASTM E2463-05 II型载货平板车覆盖层(CBC)M105A2拖挂车的标准性能规范

1.1 This specification covers the general performance requirements for the Type II Cargo Bed Cover (CBC). The Type II Cargo Bed Cover is a removable general purpose rigid enclosure for the cargo bed of the M105A2 Trailer. The Type II CBC provides environmental protection and security for mission equipment and items of general transport.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parenthesis are for information only.The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II

NF S56-320:2004 旅居车.安全通风要求

Leisure accommodation vehicles - Safety ventilation requirements.

NF R41-901-1*NF ISO 11555-1:2004 道路车辆.旅居挂车和轻型挂车用稳定设备.第1部分:整体稳定杆

Road vehicles - Stabilizing devices for caravans and light trailers - Part 1 : integrated stabilizers.

ISO 11555-1:2003 道路车辆.旅居挂车和轻型挂车用稳定装置.第1部分:整体式稳定杆

This part of ISO 11555 specifies requirements for integrated stabilizers for central-axle (single-axle or tandem-axle) trailers up to a maximum laden mass of 3 500 kg. Integrated stabilizers conforming with its requirements are able to be used together with ISO 3853-compliant towing devices without restriction.

Road vehicles - Stabilizing devices for caravans and light trailers - Part 1: Integrated stabilizers

JT/T 488-2003 轿车运输挂车性能试验方法

本标准规定了轿车运输挂车的性能试验方法。 本标准适用于在公路及城市道路上行驶的轿车运输挂车(以下简称挂车)的性能试验。

Performance test method for car transport towed vehicles

KS R ISO 9367-2:2001 滚装船上道路车辆捆绑和固定装置.通用要求.第2部分:半挂车

이 규격은 ISO 3833에서 규정된 세미트레일러를 로로 선박(Ro/Ro Ship)에 싣는

Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships－Part 2：Semi-trailers

JT/T 427-2000 轿车运输挂车通用技术条件

本标准规定了轿车运输挂车的定义、技术要求及检验规则。 本标准适用于在公路及城市道路上行驶的轿车运输挂车，运载其他类车辆的专用挂车可参照执行。

Technical specifications for car transport towed vehicles

BS AU 138b:2000 牵引车辆、挂车和半挂车气动制动系统.“接触”式连接器

This British Standard specifies the dimensions required for correct mating of "contact" type couplings for connecting the pneumatic braking system of towing vehicles to trailers or semi-trailers. If not specifically dimensioned, the couplings may follow a form to suit the manufacturer. This British Standard also specifies performance requirements for the couplings, identity markings, serviceability, inspections, and maintenance. The layout and position of the couplings on the vehicle are defined in BS AU 195a: 1991 and are not incorporated in this revised British Standard. Rubber hose assemblies are specified in BS AU 110a: 1995 and are not incorporated in this revised British Standard. Coiled pipe assemblies are specified in ISO 7375-1:1996, ISO 7375-2:1998, ISO 7628-1:1998, and ISO 7628-2:1998, and are not incorporated in this revised British Standard. This British Standard applies to two-line pneumatic braking systems and to three line pneumatic braking systems that include a secondary line. This British Standard specifies C type and CA type "contact" couplings. C type couplings are used in two line braking systems, and the CA type exclusively for the secondary line of a three line braking system. Each of the assemblies specified in this British Standard are intentionally physically non-interchangeable. It is further intended that each of the assemblies cannot be dismantled or repaired. This British Standard specifies the following: a) the form and dimensions of the mating parts of the C type "contact" coupling and for the self-sealing valve and valve lifter to be incorporated in the coupling, to enable it to be used on the control or on the supply line of a two-line or three-line pneumatic braking system; b) the form and dimensions of the mating parts of the CA type "contact" coupling and for the self-sealing valve incorporated into the female coupling, to enable it to be used on the secondary line of a three-line pneumatic braking system.

Towing vehicle, trailer and semi-trailer pneumatic braking systems - "Contact" type couplings

BS EN 1853:1999 农业机械.带倾卸车身的挂车.安全

Specifies specific safety requirements, means of verification and information on safe working practices to be provided for balanced and semi-mounted units.

Agricultural machinery - Trailers with tipping body - Safety

QC/T 310-1999 半挂车支承装置

本标准规定了公路及城市道路用半挂车机械式支承装置的型式和系列、互换性尺寸与技术要求。

Semi-trailer support device

QC/T 503-1999 特种挂车通用技术条件

本标准适用于由机动车辆牵引的特种用途挂车。

General technical conditions for special trailers

NF S56-110:1998 休闲膳宿车.旅居车.第1部分:有关卫生和安全的居住要求

Leisure accommodation vehicles. Caravans. Part 1 : habitation requirements relating to health and safety.

ARMY MIL-T-46768 D NOTICE 1-1995 生活区商用自载挂车

This notice should be filed in front of MIL-T-46768D(AT), dated 5 November 1992.

TRAILERS, LIVING QUARTERS: SELF-CONTAINED, MODIFIED COMMERCIAL

ARMY MIL-T-46705 E NOTICE 1-1995 2270及4540千克(5000及10000磅)容量.4轮商用旅行车类仓栅式挂车

MIL-T-46705E is inactive for new design and is no longer used, except for replacement purposes.

TRAILERS, STAKE: WAGON TYPE, 2270 AND 4540 KILOGRAM (5,000 AND 10,000 POUND) CAPACITY, 4-WHEEL, MODIFIED COMMERCIAL

BS AU 210-2:1994 大篷车和轻型挂车用拉杆.第2部分:铝拉杆和底盘设计规范

This Part of BS AU 210 specifies: a) a procedure for determining the mechanical strength of drawbars for caravans and light trailers where the vertical static force on the coupling head is not less than 245 N and not greater than 735 N; b) requirements for the mechanical design of the chassis for caravans and light trailers. This standard applies to aluminium chassis of caravans and light trailers provided they are not of welded construction. It also covers the aluminium elements of chassis of composite construction, again provided the aluminium parts have not been welded. NOTE. The method for calculation of the mechanical strength of steel drawbars for caravans and light trailers is covered in BS AU 210 : Part 1.

Drawbars for caravans and light trailers - Specification for the design of aluminium drawbars and chassis

NF S56-050:1994 旅游居住车.词汇(欧洲标准27418)

Leisure accomodation vehicles. Vocabulary.