V50 航空运输与地面设备综合 标准查询与下载

SAE AIR4364A-1998 (R)靠电池供电的地面支持设备的使用

This Aerospace Information Report (AIR) covers, and is restricted to, selecting appropriate applications for electric powered ground support equipment (GSE) at airports. This document is intended to provide basic information and procedures for determining applications and developing cost comparisons that are appropriate for the use of electric powered GSE. Adherence to the guidelines herein will minimize the possibility of using electric powered GSE in unsuitable applications.

(R) Utilization of Battery-Powered Ground Support Equipment

SAE AIR1558A-1997 对接保护装置.飞机的地面设备

The protective device hereinafter called a fender, is intended to serve its purpose during normal aircraft servicing and prevent damage during docking contact rather than aggressive impact. This SAE Aerospace Information Report (AIR) discusses damage to aircraft caused by ground equipment contact and suggests methods of protecting against that damage.

Interface Protective Devices - Ground Equipment to Aircraft

MH/T 2002-1996 民用航空地面事故等级

Civil Aviation Ground Accident Level

HB 7267-1996 飞机基本重量检查单与装载数据手册编写要求

本标准规定了编制飞机基本重量检查单与装载数据手册的编写要求与格式。 　　本标准适用于编制飞机基本重量检查单与装载数据手册。

Aircraft Basic Weight Checklist and Loading Data Manual Compilation Requirements

HB 7265-1996 民用飞机货舱衬垫火焰穿透 试验方法

本标准规定了民用飞机货舱衬垫火焰穿透试验的试验设备、试样、试验程序及试验报告等。 　　本标准适用于民用飞机货舱衬垫的火焰穿透试验。

Test method for flame penetration of civil aircraft cargo compartment lining

ARMY MIL-PRF-52747 F-1996 标准和服务闭路加油喷嘴

This specification covers two types of closed-circuit fuel servicing nozzle assemblies.

NOZZLE ASSEMBLY, CLOSED-CIRCUIT REFUELING, STANDARD AND ARCTIC SERVICE

BOCA CHAPTER 8 NFPC-1996 机场、直升机场和直升机降落机场

The provisions requiring that the excavation left when an unfit structure has been removed be filled in is an obvious, but often neglected means of protecting the public health and safety.

Airports, Heliports and Helistops

HB 7223-1995 飞机空运集装板通用规范

本标准规定了用于飞机空运货物的集装板（以下简称集装板）的技术要求、试验方法、检验规则、标志、包装和贮运等要求。 　　本标准适用于集装板的设计、制造、试验及验收。

General specification for aircraft air freight pallets

SAE AIR4771-1995 推荐的支撑位置

This SAE Aerospace Information Report (AIR) contains information that can be used by the air transportation industry to provide passengers in forward facing seats, using lap belt restraints only, with consistent brace for impact positions. This information is intended to reduce the potential confusion passengers may experience upon being presented with different brace for impact positions as they travel on different aircraft or on different carriers. This document does not address child restraint, situations where adult passengers are seated behind fixed tables, or who are using upper-torso restraint, or where passengers are not seated in forward facing seats.

Recommended Brace Positions

BS M 83:1995 航空货运和地面设备的词汇

The glossary is published in English and French to show the equivalent terms in the two languages.

Glossary for air cargo and ground equipment

HB 7118-1994 航空运输性要求

air transport requirements

ISO 12118:1995 航空货运设备 全向额定承载能力等于或高于22250N(50001bf)的双螺柱系留接头的识别标志

Specifies an identification scheme for double-stud tie-down fittings having an omnidirectional rated load capacity of 22 250 N (5 000 lbf) or above in a rail conforming to ISO 7166. Applicable to all cargo tie-down fittings equipped with a movable plunger, regardless of material or method of fabrication.

Air cargo equipment - Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22250 N (5000 lbf) or above

ISO 10254:1995 航空货运和地面设备 词汇 两种语言版

Defines 117 terms in English and French in the alphabetic order of the English versions. Alphabetic indexes in English and French are given the English index including all entries resulting from repositioning of the words in a term.

Air cargo and ground equipment - Vocabulary

ARMY MIL-PRF-52748 F-1995 标准和服务闭路重力填土转接器喷嘴

This specitication covers two types of nonautomatic shut-off nozzles intended for adapting a closed-circuit refueling(CCR) nozzle, conforming to MiL-N-52747 to perform conventional open port or gravity ?ll dispensing of liquid hydrocarbon fuels(see 6.1).

NOZZLE, ADAPTER, CLOSED-CIRCUIT TO GRAVITY FILL, STANDARD AND ARCTIC SERVICE

SAE AIR4896-1995 推荐RMS条款和参数

The terms used in most engineering technologies tend to be physical characteristics such as speed, rate of turn, and fuel consumption. While they may require very careful definition and control of the way in which they are measured, the terms themselves are not subject to different interpretations. Reliability, maintainability and supportability (RMS) however, use terms that are mathematically defined. As a result, there are more than 2000 terms defined in just the documents reviewed so far, many of which have multiple interpretations. This proliferation of definitions of the terms leads to problems when one attempts to compare the performance of one system to another. For example, the RMS performance of a transport aircraft from the commercial arena is measured using metrics that are not the same as those for a fighter or attack aircraft from a military service. It is accepted that some of the metrics may be unique because of the nature of the missions, but it is the strong conviction of the Government and Industry practitioners who make up the SAE Committee G-11 that there should be some fundamental definitions used for all hardware systems. Accordingly, in early 1986 the SAE G-11R (resources) subcommittee was formed and tasked to review relevant RMS documents, extract any applicable terms, and through a system of logical selection compile a series of terms and definitions that would be recommended for the Aerospace Community. There are undoubtedly many more documents that need to be reviewed for the definitions they contain, for example, we have specifically excluded software reliability from this edition. Also, there is a need to reconcile the terms and their definitions with those commonly used in the commercial aircraft business. It is planned that the SAE subcommittee work shall continue to result in future revisions that will broaden the scope of the document. This is the document that has been prepared by the SAE G-11R subcommittee. Future updates of this document will continue to reflect the converging of defense and commercial technology and standards.

Recommended RMS Terms and Parameters

HB 6883-1993 可拖曳的飞机地面保障设备机动性通用规范

本标准规定了可拖曳的飞机地面保障设备机动性设计和性能的一般要求。 　　本标准适用于用车辆牵引或人力推动的飞机地面保障设备（以下简称设备）。

General specification for the mobility of towable aircraft ground support equipment

HB 6991-1994 飞机地面系留装置通用规范

本标准规定了飞机地面系留装置的技术要求、试验方法、检验规则及包装要求。 　　本标准适用于飞机地面系留装置。当本标准与型号规范相矛盾时，以型号规范为准。

General specification for aircraft ground mooring devices

SAE AIR4783-1994 飞机地面加燃料的术语汇总表

This SAE Aerospace Information Report (AIR) presents a glossary of terms commonly utilized in the ground delivery of fuel to an aircraft and some terms relating to the aircraft being refueled. The purpose of this document is to provide background material for educational purposes to persons designing, building, and using aircraft ground refueling delivery systems.

Glossary of Terms - Aircraft Ground Refueling

ARMY A-A-52483-1994 公制紧急及服务汽车空气制动鉴定板

The General Services Administration has authorized the use of this commercial item description(CID) as a replacement for MS53007D, which is canceled.

PLATE, IDENTIFICATION: EMERGENCY AND SERVICE AUTOMOTIVE AIR BRAKE (METRIC)

HB/Z 231-1993 运输机维修性设计准则

本标准规定了运输机整机及其系统、结构的维修性设计一般要求和详细要求及其对地面设备的要求。 　　本标准适用于民用运输机和军用运输机的维修性设计，可作为维修性论证、设计、评审的依据。在编制具体型号维修性设计准则时，可以对本准则详细要求进行剪裁。

Design criteria for maintainability of transport aircraft