47.040 远洋轮 标准查询与下载

ISO 11336-3:2019 大型游艇.玻璃开口的耐候性和水密性强度.第3部分:安装和使用检验的质量保证

This document specifies — the content of the product data sheet of glazing materials for use on yachts, — the evaluation of conformity to the product data sheet of laminated glass and laminated safety glass for use on yachts, — the product labelling and identification methods for glass supplied for installation on board a yacht, and — methods for survey of installed glazing. It does not cover distortion of view or aesthetic aspects.

Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 3: Quality assurance, installation and in-service inspection

ASTM F3059-18 用于海洋建造和造船的纤维增强聚合物（FRP）光栅的标准规范

1.1 This specification provides the testing and performance requirements for fiber-reinforced polymer (FRP) gratings used in marine construction and shipbuilding as an equivalency to the specification of steel gratings rated for a maximum load of 94 lbf/ft2 (4.5 kN/m2 ). 1.2 The purpose of this specification is to ensure that all FRP gratings are designed and tested appropriately to ensure personnel safety. It does not address the ability of the gratings to support either moving or stationary equipment during or after a fire exposure. 1.3 This specification addresses fire conditions based on Test Methods E119 fire exposure and does not address hydrocarbon pool or jet fire exposures. 1.4 This specification is intended for use by all persons designing, manufacturing, testing, inspecting, and maintaining FRP gratings. 1.5 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This specification does not constitute regulations or ship classification rules, which shall be consulted where applicable. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding

BS ISO 20438:2017 船舶和海洋技术 海上系泊链

Ships and marine technology. Offshore mooring chains

ISO 20438:2017 船舶与海洋技术. 海上系泊链

Ships and marine technology - Offshore mooring chains

GSO ISO 14886:2016 船舶和航海技术 大型游艇 玻璃钢游艇的结构防火

This International Standard applies to the structural fire protection of large FRP yachts of 24 m in length and over, and carrying up to 12 passengers. The International Standard is not applicable to vessels subject to SOLAS. By using the heat transfer Fourier Number, the International Standard determines the equivalency of any proposed insulated FRP sandwich laminate to the model insulated sandwich laminate based on a fire tested insulated laminate approved in accordance with IMO FTP Code as a fire-resisting division. The method considers the relevant mechanical, thermal, and physical properties of the insulation and the FRP laminate. The technology of the elements of the insulation and FRP resistance to heat, smoke, and fire used in the International Standard and the effectiveness of the insulation are applicable in general to insulated FRP as a fire-resistant material. This International Standard does not cover the heat, fire, smoke resistance of the attachments of insulation to the laminate, of penetrations, doors, windows, hatches, or of any other detail in insulated laminate divisions that might impair the heat, fire, and smoke resistance performance of the divisions.

Ships and marine technology -- Large yachts -- Structural fire protection for FRP yachts

GSO ISO 14885:2016 大型游艇 主推进用柴油机和重要辅助设备 安全要求

This International Standard specifies the safety requirements for diesel engines with a rated power of 100kW and over for propulsion and essential auxiliaries for power generation for large yachts 24 m and over in hull length, measured in accordance with ISO 8666:2002, and of less than 500 GT which are in commercial use for sport or pleasure, and do not carry cargo and do not carry more than twelve passengers. The engine in terms of this International Standard is understood as the prime mover up to its driving extremitie(s) for power take off(s). This International Standard does not cover engines used for generating the emergency source of electrical power.

Large yachts -- Diesel engines for main propulsion and essential auxiliaries -- Safety requirements

GSO ISO 14884:2016 大型游艇 风雨密门 强度和风雨密要求

This International Standard specifies technical requirements for weathertight hinged, sliding, and pantograph doors for manual and powered operation providing access to accommodation and service areas on large yachts, taking into account the location of the appliance. This International Standard only considers design loads applied to the door and transmitted into the frame and the adjacent structure. Loads imparted from the yacht’s structure into the door or in its associated frame are not considered in this International Standard. Unframed glazed doors are outside the scope of this International Standard. Forward facing multi-leaf doors on the weather deck are outside the scope of this International Standard. Large yachts are of L greater than or equal to 24 m, in use for sport or pleasure and commercial operations. The appliances considered in this International Standard are primarily those that are intended to achieve weathertightness as required by International Convention on Load Lines 1966 as amended by the Protocol of 1988 (ICLL), (i.e. those fitted in position 1 and position 2) as defined in this regulation. NOTE This International Standard is based on the experience of ship door, window, and glass manufacturers, shipbuilders, and authorities who apply to ships the regulations of the ICLL, noting the provisions of Article 8 "equivalents", as agreed by the appropriate marine administration

Large yachts -- Weathertight doors -- Strength and weathertightness requirements

BS ISO 22472:2016 船舶和海洋技术 航行数据记录仪（VDR）操作和安装指南

Ships and marine technology. Guidelines for the operation and installation of voyage data recorder (VDR)

ISO 22472:2016 船舶和航海技术.航海数据记录仪(VDR)的操作和安装用指南

Ships and marine technology - Guidelines for the operation and installation of voyage data recorder (VDR)

BS ISO 4568:2006 造船. 海船. 起锚机和起锚绞盘

Shipbuilding. Sea-going vessels. Windlasses and anchor capstans

BS ISO 7061:2015 船舶与海洋技术. 远洋船的铝制靠岸跳板

Ships and marine technology. Aluminium shore gangways for seagoing vessels

GSO ISO 11336-1:2015 巨型游艇 防风雨和防水玻璃 第1部分：独立玻璃的设计和材料标准、框架和测试

  Scope is not provided for this standard

Large yachts -- Strength, weathertightness and watertightness of glazed openings -- Part 1: Design criteria, materials, framing and testing of independent glazed openings

GSO ISO 11209:2015 船舶和海洋技术 大型游艇 甲板起重机和登船和登船舷梯的电力要求

  Scope is not provided for this standard

Ships and marine technology -- Large yachts -- Deck crane and access gangways strength requirements

GSO ISO 11347:2015 船舶和海洋技术 大型游艇 涂层视觉外观的测量和评估

  Scope is not provided for this standard

Ships and marine technology -- Large yachts -- Measurement and assessment of the visual appearance of coatings

GSO ISO 16556:2015 大型游艇 甲板设备 锚泊设备

  Scope is not provided for this standard

Large yachts -- Deck equipment -- Anchoring equipments

ISO 7061:2015 船舶与航海技术.海船用铝质舷梯

Ships and marine technology - Aluminium shore gangways for seagoing vessels

GSO ISO 4568:2015 造船 游轮 绞车和船锚轴

This International Standard specifies requirements for the design, construction, safety, performance and acceptance testing of windlasses and anchor capstans. This International Standard is applicable to windlasses and anchor capstans of sea-going vessels which have electric, hydraulic, steam or external drive. For combined windlasses/mooring winches, ISO 3730 is to be used in addition to this International Standard. NOTE 1 Where reference is made in the text to “windlass” it should be understood as “windlass and anchor capstan”, where applicable. NOTE 2 Attention is drawn to the requirements of relevant Classification Societies or the government of the state whose flag the ship is entitled to fly.

Shipbuilding -- Sea-going vessels -- Windlasses and anchor capstans

ISO 14884:2015 大型游艇.防风雨门.强度和防风雨要求

Large yachts - Weathertight doors - Strength and weathertightness requirements

BS ISO 14884:2015 大型游艇. 防风雨门. 强度和防风雨要求

Large yachts. Weathertight doors. Strength and weathertightness requirements

ISO 14886:2014 船舶和海洋技术. 大型游艇. 玻璃钢游艇的防火结构

This International Standard applies to the structural fire protection of large FRP yachts of 24 m in length and over, and carrying up to 12 passengers. The International Standard is not applicable to vessels subject toISOLAS. By using the heat transfer Fourier Number, the International Standard determines the equivalency of any proposed insulated FRP sandwich laminate to the model insulated sandwich laminate based on a fire tested insulated laminate approved in accordance with IMO FTP Code as a fire-resisting division. The method considers the relevant mechanical, thermal, and physical properties of the insulation and the FRP laminate. The technology of the elements of the insulation and FRP resistance to heat, smoke, and fire used in the International Standard and the effectiveness of the insulation are applicable in general to insulated FRP as a fire-resistant material. This International Standard does not cover the heat, fire, smoke resistance of the attachments of insulation to the laminate, of penetrations, doors, windows, hatches, or of any other detail in insulated laminate divisions that might impair the heat, fire, and smoke resistance performance of the divisions.

Ships and marine technology - Large yachts - Structural fire protection for FRP yachts