47.040 远洋轮 标准查询与下载
共找到 87 条与 远洋轮 相关的标准，共 6 页
Ships and marine technology. Large yachts. Structural fire protection for FRP yachts
- ICS
- 47.040
- CCS
- U13
- 发布
- 2014-11-30
- 实施
- 2014-11-30
Large yachts. Deck equipment. Anchoring equipments
- ICS
- 47.040
- CCS
- U13
- 发布
- 2014-10-31
- 实施
- 2014-10-31
이 표준은 IMO A.861(20), IMO MSC.163(78) 및 IEC 61996[간이형 항해자료 기록장치(S-VDR:Simplified Voyage Data Recorder)에 관한 IEC 61996-2 포함]에 규정된 전기/전자 및 음향학적 시방서에 따라서 시행하는 VDR과 S-VDR의 계획, 설치 및 작동시험에 관한 지침을 제공한다. 이들 표준은 주로 VDR/S-VDR과 외부 센서들 사이의 인터페이스를 주로 취급하며 사용자, 조선소, VDR/S-VDR 기기 공급자 및/또는 센서 제작자 사이에 기술적인 합의를 위하여 중요한 항목인 것이다. 또한 성능 시험과 재생장치에 대한 요건이 포함되어 있으며, 설치와 인터페이스에 관련된 점검항목의 상세내용도 포함한다. 이 표준은 VDR 및/또는 S-VDR에 관련된 성능요소와 기능요건의 표준화를 위한 것은 아니다.이후의 규정에 있어서 특별히 별도로 규정하지 않는 한 VDR은 VDR과 S-VDR을 의미한다.?
Ships and marine technology — Guidelines for the operation and installation of voyage data recorders(VDR)
- ICS
- 47.040
- CCS
- 发布
- 2014-10-13
- 实施
- 2014/10/13
This International Standard defines the requirements for layout design, and installation for large yacht anchoring eduipment. For the purpose of this International Standard，large yachts are of ZLH (as defined according to
Large yachts - Deck equipment - Anchoring equipments
- ICS
- 47.040
- CCS
- 发布
- 2014-10
- 实施
Large yachts. Diesel engines for main propulsion and essential auxiliaries. Safety requirements
- ICS
- 47.040
- CCS
- U13
- 发布
- 2014-07-31
- 实施
- 2014-07-31
This International Standard specifies the safety requirements for diesel engines with a rated power of 100kW and over for propulsion and essential auxiliaries for power generation for large yachts 24 m and over in hull length, measured in accordance with ISO 8666:2002, and of less than 500 GT which are in commercial use for sport or pleasure, and do not carry cargo and do not carry more than twelve passengers. The engine in terms of this International Standard is understood as the prime mover up to its driving extremitie(s) for power take off(s). This International Standard does not cover engines used for generating the emergency source of electrical power.
Large yachts - Diesel engines for main propulsion and essential auxiliaries - Safety requirements
- ICS
- 47.040
- CCS
- 发布
- 2014-07
- 实施
This International Standard provides guidance for the planning, installation and operational testing of VDR S-VDR installations according to the electric/electronic and acoustic specifications of IMO A.861 (20), IMO MSC.163 (78) and IEC 61996 (including IEC 61996-2, Simplified voyage data recorder). These standards mainly deal with interfaces between VDR/S-VDR and external sensors, which is the main subject for technical agreements between user, shipyard, VDR/S-VDR supplier and/or sensor manufacturers when installations are planned. In addition, matters of performance test and playback are also described. Furthermore, details for checking of items related to the interfaces and the installation are introduced. This International Standard is not intended for the standardization of performance factors and functional requirements related to VDR and/or S-VDR. Hereafter, VDR means VDR and S-VDR unless specifically indicated otherwise. NOTE All text of this International Standard which is identical to that of IMO A.861, IMO MSC.163, IEC 61996 and IEC 61996-2 is formatted in italics, and the Regulation and associated performance standard paragraph numbers are indicated in brackets, where necessary.
Ships and marine technology -- Guidelines for the operation and installation of voyage data recorders (VDR)
- ICS
- 47.040
- CCS
- 发布
- 2013-12-31
- 实施
Aluminium shore gangways for seagoing vessels
- ICS
- 47.040
- CCS
- 发布
- 2013-09-05
- 实施
Aluminium shore gangways for seagoing vessels
- ICS
- 47.040
- CCS
- 发布
- 2013-09-05
- 实施
이 표준은 알루미늄으로 제작된 접안 갱웨이에 대하여 규정한다. 내수면 항행선의 갱웨이에는 적용하지 않는다.1.1 이 표준의 갱웨이는 선상에 설치하고, 주로 선원이 사용한다. 경량, 편의성, 그리고 선박에서 안벽(岸壁)으로의 안전한 통행 수단을 제공하도록 설계된 접안 갱웨이에 적용한다. 이러한 갱웨이는 조건이 적절하다면 선박에서 선박으로의 통행 수단으로도 사용할 수 있다.1.2 이 표준은 수평 또는 수평으로부터 30 이하의 경사에서 사용하는 데에 적합하다. 30 보다 큰경사에서의 사용에 대해서는 디딤판(목) 및 바닥판 설계에 특별한 고려가 요구된다.1.3 이 표준은 갱웨이에 대하여 화물을 적재한 트롤리와 같은 차량의 통행은 고려하지 않았다.
Aluminium shore gangways for seagoing vessels
- ICS
- 47.040
- CCS
- U27
- 发布
- 2013-09-05
- 实施
- 2013/9/5
Ships and marine technology. Large yachts. Measurement and assessment of the visual appearance of coatings
- ICS
- 47.040
- CCS
- U06
- 发布
- 2013-04-30
- 实施
- 2013-04-30
Large yachts. Strength, weathertightness and watertightness of glazed openings. Design criteria, materials, framing and testing of independent glazed opening
- ICS
- 47.040
- CCS
- Q34;U13
- 发布
- 2012-11-30
- 实施
- 2012-11-30
Ships and marine technology. Large yachts. Deck crane and access gangways strength requirements
- ICS
- 47.040
- CCS
- U22
- 发布
- 2012-11-30
- 实施
- 2012-11-30
Ships and marine technology - Large yachts - Deck crane and access gangways strength requirements
- ICS
- 47.040
- CCS
- U26
- 发布
- 2012-09
- 实施
This part of ISO 11336 specifies technical requirements for independent glazed openings on large yachts, taking into account navigation conditions, and the location of the opening. Large yachts are yachts with length of the hull, LH, higher or equal to 24 m, in use for sport or pleasure and commercial operations, with a tonnage limitation up to 3000 gross tonnage, according to the International Tonnage Convention. The opening and the associated closing appliances considered in this part of ISO 11336 are only those that are above the deepest waterline (dsw) and are critical for the ship integrity related to weathertightness and watertightness, i.e. those that could lead to ingress of water in the hull in case of rupture of the pane. The scope of this part of ISO 11336 is related to and limited to independent glazed openings. NOTE This part of ISO 11336 is based on the experience of ship window and glass manufacturers, shipbuilders and authorities who apply to ships the regulations ofISOLAS, as amended, and of the International Convention of Load Lines, as amended, noting the provisions by theISOLAS Protocol of 1988, Article 8, as agreed by the appropriate Marine Administration.
Large yachts - Strength, weathertightness and watertightness of glazed openings - Part 1: Design criteria, materials, framing and testing of independent glazed openings
- ICS
- 47.040
- CCS
- U13
- 发布
- 2012-07
- 实施
This International Standard specifies technical requirements for the measurement and assessment of the visual appearance of the superficial coating of large yachts in terms of gloss, colour and any other superficial defects. This International Standard is applicable to large yachts, of length, LH, as defined in ISO 8666, higher than or equal to 24 m, and in use for sport or pleasure and commercial operations. It describes the technical properties within which the final finish is to be evaluated before its acceptance.
Ships and marine technology - Large yachts - Measurement and assessment of the visual appearance of coatings
- ICS
- 47.040
- CCS
- U13
- 发布
- 2012-05
- 实施
This International Standard specifies requirements for the design, construction, safety, performance and acceptance testing of windlasses and anchor capstans.This International Standard is applicable to windlasses and anchor capstans of sea-going vessels which have electric, hydraulic, steam or external drive.NOTE 1: Where reference is made in the text to “windlass” it should be understood as “windlass and anchor capstan”, where applicable.NOTE 2: For combined windlasses/mooring winches, refer to ISO 3730 in addition to this International Standard.
Shipbuilding - Sea-going vessels - Windlasses and anchor capstans
- ICS
- 47.040
- CCS
- 发布
- 2007-04-26
- 实施
- 2007-04-26
