53.060 工业车辆 标准查询与下载

ISO/CD 10896-2:2023 越野卡车 安全要求和验证 第 2 部分：回转卡车

Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks

ISO 3691-4:2023 工业卡车 安全要求和验证 第4部分：无人驾驶工业卡车及其系统

Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems

ISO/CD TS 3691-8:2023 工业卡车 安全要求和验证 第 8 部分：欧盟以外国家的区域要求

Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community

GSO ISO 23308-2:2023 工业卡车能效试验方法 第2部分：操作员控制的自行式卡车、牵引和载重卡车

This document specifies the method of energy consumption measurement for the following types of industrial trucks as defined in ISO 5053‑1: — counterbalance lift truck; — articulated counterbalance lift truck; — reach truck (with retractable mast or fork arm carriage); — straddle truck; — pallet-stacking truck; — pallet truck; — platform and stillage truck; — pallet truck end controlled; — order-picking truck; — centre-controlled order-picking truck; — towing, pushing tractor and burden carrier; — towing and stacking tractor; — side-loading truck (one side only); — lateral-stacking truck (both sides); — lateral-stacking truck (three sides); — multi-directional lift truck.

Energy efficiency of industrial trucks — Test methods — Part 2: Operator controlled self propelled trucks, towing and burden carrier trucks

GSO ISO 21262:2023 工业卡车 应用、操作和维护的安全规则

This document gives safety requirements for the application, operation, maintenance, transport, tow, assembly and storage of industrial trucks (hereafter referred to as trucks) as defined in ISO 5053‑1. It applies to the following truck types: a) counterbalance lift trucks; b) reach trucks (with retractable mast or retractable fork arm carriage); c) straddle trucks; d) pallet-stacking trucks; e) platform trucks; f) double stackers; g) side-loading trucks (one side only); h) lateral-stacking trucks (both sides), and lateral- and front-stacking trucks; i) order-picking trucks; j) bidirectional and multidirectional trucks; k) counterbalance container handlers; l) articulated counterbalance lift trucks; m) variable-reach trucks; n) pallet trucks; o) platform and stillage trucks; p) tractors with a drawbar pull up to and including 20 000 N; q) burden and personnel carriers; r) trucks powered by battery, diesel, gasoline or gas (e.g. LPG, CNG, LNG). Automated functions and driverless variants of the above list of trucks are also considered part of this scope.

Industrial trucks — Safety rules for application, operation and maintenance

GSO ISO 23308-3:2023 工业卡车能效试验方法 第3部分：集装箱装卸叉车

This document specifies the method of energy consumption measurement for container handling lift trucks, as defined in ISO 5053‑1.

Energy efficiency of industrial trucks — Test methods — Part 3: Container handling lift trucks

GSO ISO 23308-1:2023 工业卡车能效试验方法 第1部分：总则

This document specifies general test criteria and requirements to measure the energy consumption for self-propelled industrial trucks (hereinafter referred to as trucks) during operation. For electric trucks, the efficiency of the battery and the battery charger is included. The truck specific requirements in ISO 23308‑2 and ISO 23308‑3 take precedence over the respective requirements of ISO 23308‑1. This document is applicable to the in-use phase of the product life cycle. It applies to the following truck types according to ISO 5053‑1: — counterbalance lift truck; — articulated counterbalance lift truck; — reach truck (with retractable mast or fork arm carriage); — straddle truck; — pallet-stacking truck; — pallet truck; — platform and stillage truck; — pallet truck end controlled; — order-picking truck; — centre-controlled order-picking truck; — towing, pushing tractor and burden carrier; — towing and stacking tractor; — side-loading truck (one side only); — variable-reach container handler; — counterbalance container handler; — lateral-stacking truck (both sides); — lateral-stacking truck (three sides); — multi-directional lift truck.

Energy efficiency of industrial trucks — Test methods — Part 1: General

ISO/DIS 22915-16:2023 工业卡车稳定性验证第16部分：步行式卡车

Industrial trucks — Verification of stability — Part 16: Pedestrian-propelled trucks

ISO/DIS 22915-1:2023 工业卡车稳定性验证第1部分：概述

Industrial trucks — Verification of stability — Part 1: General

ISO 20297-2:2023 工业卡车 随车装载的卡车 第 2 部分：安全使用要求

This document specifies requirements for the application, inspection, training, maintenance, repair and safe operation (hereafter referred to collectively as the 'safe use') of industrial and rough-terrain lorry-mounted trucks (hereafter referred to as 'trucks') which have design features that allow them to be mounted for transport on a carrier vehicle. This document is intended to achieve the following: — the prevention of personal injuries, property damage and accidents; — the establishment of criteria for inspection, maintenance and operation; — the establishment of operator training requirements. NOTE National or local requirements can apply.

Industrial trucks — Lorry-mounted trucks — Part 2: Safe use requirements

ISO/CD 22915-13.2:2023 工业卡车稳定性验证第13部分：带桅杆的越野卡车

Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks with mast

BS ISO 6055:2023 工业卡车 护顶架 规格和测试

1   Scope This document specifies the requirements and testing of overhead guards , operator’s leg(s)/feet protection for industrial trucks and overturning testing of industrial variable-reach trucks with operator position not protected by the boom (hereafter referred to as "trucks") requiring an overhead guard according to ISO 3691‑1 and ISO 3691‑2. This document is not applicable to rough-terrain variable-reach trucks and slewing rough-terrain variable-reach trucks.

Industrial trucks. Overhead guards. Specification and testing

BS ISO 22915-10:2023 工业卡车 稳定性验证 卡车在堆垛特殊条件下通过动力装置横向移动负载的附加稳定性试验

1   Scope This document specifies an additional test for verifying the stability of a laden truck fitted with a powered load-handling device, such as a sideshift, which can displace the centre of gravity laterally to a substantial, predetermined extent from the longitudinal centre plane of the truck or from the centred position. Such devices are used in this mode for depositing and retrieving a load. A displacement is considered to be a substantial displacement if it is more than: — 100 mm, for a truck with a rated capacity < 5 000 kg; — 150 mm, for a truck with a rated capacity ≥ 5 000 kg and ≤ 10 000 kg; — 250 mm, for a truck with a rated capacity > 10 000 kg and < 20 000 kg; — 350 mm, for a truck with a rated capacity ≥ 20 000 kg; This document is applicable to the following types of trucks as defined in ISO 5053‑1: a) counterbalance trucks; b) reach and straddle trucks; c) pallet stackers;

Industrial trucks. Verification of stability. Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices

T/HEBSEA 2-2023 叉车司机操作规程

主要内容如下： （1）.规程中“4　基本要求”，对使用单位、司机、车辆、作业条件、安全要求等内容明确了基本要求。 （2）.规程中“5　作业程序”，明确了车辆检查、车辆操作、车辆存放、车辆加油和充电等检查和操作要领。 （3）.规程中“6　应急处置”，明确了应急处置的一般要求和转移抛锚车辆、排险控险、医疗救护等应急处置的安全要点。

Forklift driver operating procedures

23/30455148 DC BS EN 1459-5 AMD 1. 越野卡车 安全要求和验证 第 5 部分：附件接口

BS EN 1459-5 AMD 1. Rough-terrain trucks. Safety requirements and verification - Part 5. Attachment interface

23/30455145 DC BS EN 1459-4 AMD 1. 越野卡车 安全要求和验证 第 4 部分：处理自由悬挂负载的可变前移卡车的附加要求

BS EN 1459-4 AMD 1. Rough-terrain trucks. Safety requirements and verification - Part 4. Additional requirements for variable-reach trucks handling freely suspended loads

23/30455151 DC BS EN 1459-1 越野卡车 安全要求和验证 第 1 部分：可变前移卡车

BS EN 1459-1. Rough-terrain trucks. Safety requirements and verification - Part 1. Variable-reach trucks

BS EN ISO 3691-2:2023 工业卡车 安全要求和验证 自走式可变前移卡车

1   Scope This document gives safety requirements and the means for their verification for self-propelled industrial variable-reach trucks and variable-reach container handlers/reach stackers as defined in ISO 5053‑1 (hereafter referred to as trucks), equipped with forks or integral load-handling devices for normal industrial duties (e.g. fork arms or means, such as spreaders , for handling containers). This document does not apply to: — rough-terrain variable-reach trucks, — rough-terrain variable-reach trucks for handling containers, — lorry mounted trucks covered by ISO 20297‑1, — machines designed primarily for earth-moving (e.g. loaders and dozers), even when their buckets and blades are replaced with forks, — machines from which the load can swing freely in all directions. This document is not applicable to trucks manufactured before the date of its publication. For the purposes of this document, fork arms and integrated attachments are considered to be a part of the truck, whereas attachments/equipment/tools mounted on the load carrier or on the fork arms which are removable by the user are not. Nevertheless, for interch...

Industrial trucks. Safety requirements and verification. Self-propelled variable-reach trucks

BS EN 16307-3:2023 工业卡车 安全要求和验证 对具有升降操作员位置的卡车和专门设计用于高负载行驶的卡车的补充要求（EN 16307-1 的附加要求）

This document specifies requirements for the types of industrial trucks specified in the scope of This document is intended to be used in conjunction with EN ISO 3691-3:20162. These requirements are supplementary to those stated in EN ISO 3691-3:20162. This document deals with the following significant hazards, hazardous situations or hazardous events relevant when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer: — acceleration, deceleration (kinetic energy); — machinery mobility. This document specifies supplementary requirements to EN ISO 3691-1:20151, EN ISO 3691-3:20162 and EN 16307-1:2020: — brakes operation without guidance system; — operator fall protection; — information for use (instruction handbook and marking). Annex A (informative) contains the list of significant hazards covered by this document.

Industrial trucks. Safety requirements and verification - Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)

BS EN 16307-2:2023 工业卡车 安全要求和验证 自走式可变前移卡车的补充要求

This document specifies requirements for the types of industrial trucks specified in the scope of This document is intended to be used in conjunction with EN ISO 3691-2:2023. These requirements are supplementary to those stated in EN ISO 3691-2:2023. This document deals with the following supplementary requirements and significant hazards, hazardous situations or hazardous events relevant, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer: — electrical requirements; — noise emissions; — vibration; — electromagnetic radiation. This document specifies supplementary requirements to EN ISO 3691-2:2023: — operator's seat; — protection against crushing, shearing and trapping; — longitudinal stability determination; — visibility; — information for use (instruction handbook and marking). Annex A (informative) contains the list of significant hazards covered by this document.

Industrial trucks. Safety requirements and verification - Supplementary requirements for self-propelled variable-reach trucks