55.040 包装材料和辅助物 标准查询与下载

T/HAEPCI 076-2021 绿色设计产品评价技术规范 包装纸印刷品

在继承和借鉴绿色（生态）设计产品评价国家标准基础上，组成“基本要求（组织层面）+评价指标要求（产品层面）+报告要求（生命周期评价）”绿色设计产品标准框架。将环境标识和绿色建材等按照国标要求，统一纳入本绿色设计产品评价标准。 产品层面的评价指标涉及：针对产品的原材料选择、生产过程、使用环节以及如何便于产品回收处理等方面选取一些重要的可以量化的指标，主要分为：①资源属性指标，主要包括单位原料纸使用量、可降解原材料使用率；②能源属性指标，主要涉及生产和使用过程中能源消耗方面；③环境属性指标，主要涉及绿色原材料使用、固废回收等方面；④品质属性指标，主要涉及产品性能、有害物质等方面。 组织层面的评价指标主要针对制造产品的企业在节能环保生态等方面提出相关要求，重点包括：企业环境管理体系、能源管理体系、质量管理体系、职业健康安全管理体系等管理要求以及节能、环保、新能源、清洁技术、工艺、设备和相关标准使用的要求。

Technicalspecificationforgreen-design product assessment—Packing paper ofprinting matter

GSO 2589:2021 聚酯捆扎带 规格

This standard covers the requirements for polyester straps intended for use in baling, closing, reinforcing and bundling articles for shipment, unitizing and palletizing.

Polyester Strapping - Specification

GSO ASTM D3981:2021 一般用途和包装应用中密度聚乙烯制成的聚乙烯薄膜的标准规范

This specification covers unpigmented, unsupported, sheet or tubular, medium-density polyethylene films intended for general uses and packaging applications. The film shall be made from homopolymer polyethylene, copolymer polyethylene commonly referred to as low-pressure polyethylene, or blends of homopolymers and copolymers that include ethylene/vinyl-acetate copolymers. The specimens shall be conditioned before testing in the standard laboratory temperature. Tests shall be conducted to determine the physical properties of the specimens which shall conform to the following physical requirements: secant modulus or stiffness; kinetic coefficient of friction; optical properties such as clarity, gloss, and haze; surface treatment level or wetting tension; impact resistance; tensile strength and elongation at break; heat sealability; and odor level.

Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

DIN 55473:2021 辅助包装方式 袋装干燥剂 交货技术条件

This standard applies to desiccants in bags sufficiently pervious to water vapour for the use in packages with low water vapour transmission. The purpose of this requirements are uniform assessment criteria for the efficiency of the desiccant bags. Desiccant bags should protect t

Auxiliary means of packaging - Desiccant in bag - Technical delivery conditions

DIN 55571-2:2021 Hot-Tack 第2部分：剥离强度测量装置

This standard specifies test methods which can be used to determine the hot tack strength of a sealed seam within prescribed sealing parameters. By varying the sealing parameters this method can also be used to determine the conditions for achieving the optimal hot tack strength

Hot-Tack - Part 2: Peel strength measuring devices

KS T 1065-2021 水泥用缝制牛皮纸袋

Sewn kraft paper sacks for cement

KS T 1067-2021 铝箔层压包装纸

Aluminium foil laminated package paper

JIS Z 0208 AMD 1:2021 防湿包装材料透湿度的试验方法. 卡普法(修改件1)

Testing Methods for Determination of the Water Vapour Transmission Rate of Moisture-Proof Packaging Materials (Dish Method) (Amendment 1)

T/DGYX 0001-2021 快递封装用气垫膜包装袋

       本文件规定了快递封装用气垫膜包装袋的术语和定义、技术要求、试验方法、检验规则以及包装、标志、运输和储存要求。        本文件适用于以低密度聚乙烯（LDPE）、线性低密度聚乙烯（LLDPE）、生物降解材料的一种或多种材料为主要材质的快递封装用气垫膜包装袋产品。        本文件不适用于直接接触食品的快递封装用气垫膜包装袋。

Air spring film packing bag for express servic

QB/T 5584-2021 塑料气垫卷膜

Plastic air cushion roll film

ASTM F392/F392M-21 柔性屏障材料弯曲耐久性调节的标准实施规程

1.1 This practice covers conditioning of flexible barrier materials for the determination of flex resistance. Subsequent testing can be performed to determine the effects of flexing on material properties. These tests are beyond the scope of this practice. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability

KS T 1031-2021 包装垫用发泡羊毛塑料

Expanded wool plastics for packaging cushion

T/CAB 0088-2021 无机化聚烯烃降解购物袋

本文件规定了无机化聚烯烃降解购物袋的术语和定义、分类、要求、试验方法、检验规则及包装、包装标志、运输、贮存。

Inorganic-doped polyolefin degradable shopping bag

T/CAB 0086-2021 无机化聚烯烃膜材料 一般要求

本文件规定了无机化聚烯烃膜材料的术语和定义、标识标志、工艺、技术要求、包装、运输与贮存等要求。

General requirements for inorganic-doped polyolefin film material

T/CAB 0087-2021 无机化聚烯烃膜材料 测试方法

本文件规定了无机化聚烯烃膜材料的术语和定义、试验方法、检验规则等内容。

Testing methods for inorganic-doped polyolefin film material

T/CAB 0085-2021 包装追溯体系通用技术要求

本标准提出了包装追溯体系的基本要求、技术要求。基本要求包括系统集中化、云部署、云安全、独立实例托管、审核与日志、合规、隐私等；技术要求包括通用核心功能、UID的生成、发布和完整性，系统性能，关联UID，字符支持等方面。

General technical requirements for packaging traceability system

ASTM F99-21 编写柔性阻隔卷材材料规范的标准指南

1.1?This guide defines the requirements and considerations for flexible barrier materials. 1.2?This guide addresses some critical printing requirements for flexible barrier materials. 1.3?Guidance is provided on specification requirements and considerations for flexible barrie

Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials

ASTM D3078-02(2021)e1 用于通过气泡排放测定软包装中的泄漏的标准测试方法

1.1 This test method covers the determination of gross leaks in flexible packaging containing a headspace gas. Test sensitivity is limited to 1 × 10−5 atm cm3 /s (1 × 10−6 Pa m3 /s) or even less sensitive as indicated in a recent interlaboratory test (reported in Section 12). 1.2 Small leaks may not be detected by this procedure. Viscoelastic effects on the products, or entrapped air, become significant and prevent passage through small openings. Positive pressure inside the pouch after the vacuum is drawn may force the product to plug small leaks. The size of the leak that can be detected is dependent upon the products contained, the nature of the packaging material, and the test parameters selected. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission

ASTM F1306-21 柔性阻隔膜和层压板的缓慢渗透电阻的标准测试方法

1.1?This test method permits flexible barrier films and laminates to be characterized for slow rate penetration resistance to a driven probe. The test is performed at room temperature, by applying a biaxial stress at a single test velocity on the material until perforation occur

Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

ASTM D3344-90(2021) 瓦楞纸板总蜡含量的标准试验方法

1.1 This test method covers the determination of the weight of wax that is present in a specimen of wax-treated corrugated paperboard. The test method is applicable to specimens that have been waxed by either impregnation (saturation) operations or coating operations, or combinations of such operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For precautionary statement, see 5.4 and 7.2. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Total Wax Content of Corrugated Paperboard