包装材料和辅助物标准-分析测试百科网

ASTM D5077-90(2021) 与静电放电（ESD）包装材料有关的标准术语

1.1 The terms and definitions in this standard are related to Electrostatic Discharge (ESD) Packaging Materials and ESD Protective Materials. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials

ICS: 55.040
CCS
发布: 2021-10-01
实施

ASTM D6537-00(2021) 测定包装性能的仪器化包装冲击试验的标准实施规程

1.1 This practice covers methods for obtaining measured shock responses using instrumentation for an actual or simulated product package system when subjected to defined shock inputs to measure package performance. 1.2 This practice establishes methods for obtaining measured shock data for use with shock and impact test methods. It is not intended as a substitute for performance testing of shipping containers and systems such as Practice D4169. 1.3 This practice will address acceleration measuring techniques. Other ways of measuring shock impacts, such as high speed video, are not covered by this practice. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance

ICS: 55.040
CCS
发布: 2021-10-01
实施

ASTM D1596-14(2021) 包装材料动态冲击缓冲特性的标准试验方法

1.1 This test method covers a procedure for obtaining dynamic shock cushioning characteristics of packaging materials through acceleration-time data achieved from dropping a falling guided platen assembly onto a motionless sample. This test method does not address any effects or contributions of exterior packaging assemblies. 1.2 The data acquired may be used for a single point or for use in developing a dynamic cushion curve for the specific material being tested. Such data may be used for comparison among different materials at specific input conditions, or qualifying materials against performance specifications. Caution should be used when attempting to compare data from different methods or when using such data for predicting in-package performance. Depending upon the particular materials of concern, correlation of such data (from among differing procedures or for predicting in–package performance) may be highly variable. NOTE 1—Alternative and related method for possible consideration is Test Method D4168. 1.3 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material

ICS: 55.040
CCS
发布: 2021-10-01
实施

ASTM D4168-95(2021) 就地泡沫缓冲材料传导冲击特性的标准试验方法

1.1 These test methods determine the shock-absorbing characteristics of foam-in-place packaging materials. 1.2 Test Method A uses a free-fall package drop test apparatus. 1.3 Test Method B uses a shock-test apparatus. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials

ICS: 55.040
CCS
发布: 2021-10-01
实施

ASTM D2221-01(2021) 包装缓冲材料蠕变性能的标准试验方法

1.1 This test method covers the determination of creep properties of package cushioning materials. It is applicable to materials available in bulk, sheet, or molded form used for the cushioning of articles during storage, handling, and shipment. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Creep Properties of Package Cushioning Materials

ICS: 55.040
CCS
发布: 2021-10-01
实施

ASTM D880-92(2021) 船运集装箱和系统冲击试验的标准试验方法

1.1 This test method covers two procedures for conducting impact tests on loaded containers or shipping units (pallet loads), as follows: 1.1.1 Procedure A, to test the ability of a container or shipping unit to withstand impacts, and 1.1.2 Procedure B, to test the ability of a container or shipping unit or interior packing, or both, to provide protection to the contents, when subjected to impacts. 1.2 Either of these two procedures may be used to evaluate different designs of containers of the same size and carrying the same load. These procedures are suitable for testing various types of containers such as boxes, crates, barrels, drums, kegs, bags, sacks, or pails made of various materials or combinations of materials and for shipping units such as pallet loads or palletized units. 1.3 The procedures described in this test method are particularly suitable for testing large or heavily loaded containers. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Note 1 and Section 7. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Impact Testing for Shipping Containers and Systems

ICS: 55.040
CCS
发布: 2021-10-01
实施

DIN 6125:2021 包装试验不透明和/或白色颜料薄膜不透明度的测定

This document specifies a method for determining the opacity of opaque and/or white pigmented films. Opacity is a measure of the translucency of opaque and/or white pigmented films.

Packaging test - Opaque and/or white pigmented films - Determination of opacity