61.040 帽子、服饰品、衣扣 标准查询与下载

T/ZZB 2871-2022 气密拉链

本文件规定了气密拉链的分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和使用准则及质量承诺。 本文件适用于气密拉链（以下简称“拉链”）。

Airtight zipper

T/ZZB 2886-2022 拉链用上止和下止

本文件规定了拉链用上止和下止的分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存及质量承诺。 本文件适用于金属拉链、注塑拉链、尼龙拉链、隐形拉链和编织拉链用金属类上止和下止。

Top stop/bottom stop of zipper

T/SHDSGY 162-2022 数码印花过程控制要求及检验方法

本标准规定了数码印花过程控制要求及检验方法的术语和定义、要求、抽样、试验方法、检验规则、标志和包装。 本文件适用于数码印花过程控制要求及检验方法。

Digital printing process control requirements and inspection methods

KS K 6101-2022 棉质毛巾

Cotton towel

T/MYHYXH 0001-2022 筒帽

技术内容主要有：规格尺寸允许偏差、原材料、外观、理化性能（纤维含量、甲醛含量、pH值、异味、可分解致癌芳香胺染料、耐皂洗色牢度、耐干洗色牢度、耐摩擦色牢度、耐光色牢度、耐水色牢度、洗涤后外观、防紫外线性能、燃烧性能、残留金属针）

Bucket hats

ASTM D4153-22 男式、女式和儿童机织手帕织物的标准性能规范

1.1 This performance specification covers woven fabrics to be used in the manufacture of men’s, women’s, and children’s handkerchiefs, both utilitarian and decorative. 1.2 This performance specification is not applicable to open-work fabrics such as lace which is used primarily to decorate handkerchiefs, or woven fabrics used for the manufacture of scarves. 1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Men's, Women's, and Children's Woven Handkerchief Fabrics

ASTM D4035-22 针织领带和围巾织物的标准性能规范

1.1 This performance specification covers knitted necktie and scarf fabrics composed of any textile fiber or mixture of textile fibers. 1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Knitted Necktie and Scarf Fabrics

QB/T 5762-2022 钮扣通用技术要求和检测方法 天然果实类

General technical requirements and testing methods for buttons Natural fruits

QB/T 5784-2022 尼龙防水拉链

Nylon waterproof zipper

T/CASMES 91-2022 阻燃防滑拉链

本文件规定了阻燃防滑拉链的分类、结构、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于阻燃防滑拉链（以下简称“拉链”）。

Flame retardant non slip zipper

DB53/T 1119-2022 石林彝族（撒尼）刺绣技法

Shilin Yi (Sani) Embroidery Techniques

T/ZZB 2765-2022 织带缝制帽

本文件规定了织带缝制帽的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于以棉、麻和聚酯纤维等为原料织成的织带通过螺旋缝制而成的缝制帽。 本文件不适用于36个月及以下的婴幼儿戴的帽子。

Sewn ribbon cap

T/ZZB 2629-2022 机织头巾

本文件规定了机织头巾的基本要求、技术要求、 试验方法、 检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于纺织机织物为主要原材料生产的头巾。 本文件不适用于36个月及以下婴幼儿产品。

Woven headscraf

ASTM D2060-14(2022) 测量拉链尺寸的标准试验方法

1.1 These test methods cover the measurement of the dimensions of all types and sizes of zippers. 1.2 The test methods appear as follows: Sections Chain Flatness 34 – 39 Chain Straightness 40 – 44 Chain Thickness 28 – 33 Chain Width 45 – 50 Length of Zipper or Parts 9 – 14 Longitudinal Dimensional Change 51 – 58 Slider Mouth Width 21 – 27 Tape Width 15 – 20 1.3 The values stated in either SI units or in other units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Measuring Zipper Dimensions

ASTM D2052-05(2022) 拉链耐干洗色牢度的标准试验方法

1.1 This test method covers the determination of change in shade and of staining of zipper stringers under drycleaning conditions. This test method is applicable to the textile portion of zipper stringers of all materials. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Colorfastness of Zippers to Drycleaning

ASTM D2053-99(2022) 拉链耐光色牢度的标准试验方法

1.1 This test method covers the determination of the alteration in shade of the textile portion of zippers when exposed to light, regardless of the materials of manufacture. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Colorfastness of Zippers to Light

ASTM D2058-03(2022) 拉链饰面耐干洗性的标准试验方法

1.1 This test method covers the determination of the durability of the enamel or other decorative coating of zippers when subjected to drycleaning. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Durability of Finish of Zippers to Drycleaning

ASTM D2059/D2059M-03(2022) 拉链耐盐雾性的标准试验方法

1.1 This test method covers the determination of the resistance of all types of zippers to corrosion and their ability to function properly after exposure of specified duration in a prescribed salt spray. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Resistance of Zippers to Salt Spray (Fog)

ASTM D2057-05(2022) 拉链耐洗色牢度的标准试验方法

1.1 This test method covers the determination of alteration in shade and of staining under conditions similar to that experienced in domestic washing of zipper stringers. This test method is applicable to the textile portion of zipper stringers that utilize tapes made of cotton, linen, or manufactured organic fibers, and to combinations thereof. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Colorfastness of Zippers to Laundering

ASTM D2051-14(2022) 拉链表面耐洗性的标准试验方法

1.1 This test method covers the determination of the durability of the enamel or other decorative coating of a zipper when subjected to laundering. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Durability of Finish of Zippers to Laundering